The peak output power of laser diodes using this material is up to 15 W.
利用该材料制作的激光二极管，其峰值输出功率达到15W。
Overmodulation may be employed in the optical transmitter to increase the output power of laser diode.
在光发送机中采用过调制技术来提高激光器的输出光功率；
The larger is the output power of laser, the shorter is the irradiative time of impairment ear bone and cochlea.
激光输出功率密度愈大，损伤听骨和耳蜗的照射时间愈短。
Relationships between output power of laser diode and optical feedback coefficient, optical feedback coefficient and defocusing amount are numerically investigated.
数值研究了非相干光反馈时半导体激光器输出功率随反馈系数的变化关系以及待测物体离焦量与反馈系数的关系。
The coupling efficiency of laser with semiconductor power amplification, output power of laser with semiconductor power amplification and operating lifetime have been improved.
提高了半导体功率放大激光器的光耦合效率以及输出的光功率。
As the experiment results, the output power of laser system with double ellipsoidal focus cavity is much higher than that of the laser system with single ellipsoidal focus cavities.
实验结果表明，使用了双椭圆聚光腔激光扫描系统的激光输出功率明显高于采用单椭圆柱聚光腔的系统。
The focus is given to the influence of pumping power, cavity length, the output coupler transmission and initial transmission on the repetition rate, pulse width and output power of laser output.
着重研究了抽运功率、腔长、输出镜透过率以及初始透过率等因素对激光输出脉冲序列的重复率、脉冲宽度以及输出功率的影响。
The influence of the parameters such as surface treatment state, laser output power, welding speed, protective atmosphere, and pulse frequency on the welding quality was studied.
研究了试件表面处理状态、保护气体、激光输出功率、焊接速度、激光脉冲频率等工艺参数对焊接质量的影响规律。
This method suits for pumping the fiber laser and amplifier of several watts output power.
该方法适用于输出功率为数瓦的光纤激光器和放大器的侧面抽运。
A solid state laser operated at lower-order mixed mode possesses both advantages of high output power and good beam quality.
当固体激光器运转在低阶混合模时，既可得到较高的功率输出，又可保证较好的光束质量。
The influences of thermal effects and the matching of the laser mode radius with the pump spot radius on the output power and beam quality are discussed.
讨论了激光晶体的热效应以及激光模半径与泵浦光斑半径匹配对激光输出功率和输出光束质量的影响。
For local or general anaesthesia, cut and vaporize tumor with CO_2 laser in 4-20w of continuous output power, cut specimen as the pathologic segment.
局部或全身麻醉后，以连续输出功率为4 ~ 20w的CO_2激光切割及气化肿瘤，切取获得标本可供病理切片。
The experimental result shows that the depth of hardened zone and smoothness of surface can be controlled conveniently by varying the power output beam diameter and scanning rate of laser light.
试验表明：通过调节激光器的输出功率、光斑直径和扫描速度可以方便地控制熔化层深度和表面平整度。
The main factor limiting the output energy and efficiency of high power solid state laser drivers used in ICF is the small-scale self-focusing.
用于惯性约束核聚变(icf)的高功率激光在传输中的小尺度自聚焦是使光束质量变坏和限制输出功率的主要因素。
The output power of this He-Ne laser can be enhanced by increasing its transverse dimension.
对这种氦氖激光器，可利用增加其横向尺寸来提高输出功率。
Solid-state tube laser (SSTL) is one of available laser with high power output, for its high slop efficiency and electro-optical efficiency compared to the solid-state rod laser.
管状固体激光器可获得较高的斜效率及电光转换效率，因此是人们寻求可获得高输出功率的有效器件之一。
The calculation indicates that the main parameter effecting laser output power is the peak electron temperature, while the limitation of repetition rates is related to the initial electron density.
通过计算揭示出影响激光输出功率的主要因素是峰值电子温度，而重复频率的限制主要取决于初始电子密度。
As a result, it induces oscillating mode change, laser cavity unstable, and the complicated change of laser output power.
因而引起振荡模式的变化，腔的失稳，激光输出功率变化的复杂化。
With good beam quality, the stability of output laser power, it is easy to adjust the marking effect.
光束质量好，输出激光稳定性高，打标效果较易调试。
The multiple pump sources are used to increase the output power of single fiber laser, and the two dimensions arrange of fiber laser array increases the number of combining fibers.
利用多泵浦源提高单根光纤激光器的输出功率，利用二维光纤激光阵列排列增加参与组束的光纤数目。
The system used as beam expander for dye laser, which has advantages of conveniently regulate and petty loss of light energy, transformation efficiency and output power of dye laser is increased.
该系统用于染料激光器中作为光束扩展器，具有调整简便，光能损耗小等优点，可提高染料激光器的转换效率和输出功率。
Wavelength switching together with the switching of the dominating output port of the fiber laser is achieved by controlling the power of a tunable injection laser.
通过控制一个可调谐注入激光器的光功率实现了该激光器的波长切换和主输出端口切换。
This is the starting point for the analysis of laser power output that follows.
这是下文用来分析激光输出功率的出发点。
The control system are consisted of computer, laser sensor, A/D converter and the power driver of output etc.
实验系统由计算机、激光传感器、A／D转换器及输出功率驱动器等实验装置组成；
The output power can be greatly increased by making use of gas flowing technology in TEA CO2 laser.
在TEACO2激光器中采用流动技术可以极大地提高输出功率。
This paper analyses the feedback technology for the power supply of semiconductor laser, which is used for stabilizing the driving current and the optic output power of semiconductor laser.
本文讨论在半导体激光器电源中采用反馈技术来稳定激光器的驱动电流和输出光功率。
The characteristics of the laser output at pulse operation were studied and the maximum peak power of 600w was obtained.
研究了激光器的脉冲工作特性，以及不同脉冲情况下脉冲的时间特性。获得了峰值功率约为600W的激光输出。
In Chemical Oxygen-Iodine laser (COIL) system, the water vapor produced from the generator of singlet oxygen can have severe negative effects on the output of the laser power.
氧碘化学激光(简称COIL)系统中，水是影响激光功率输出的最重要的原因之一。
Some new results are given through investigation on threshold feature of the laser, effect of gas mixture ratio and discharge temperature on the laser output power etc.
通过研究铜空心阴极激光器阈值特性、气体混合比和放电温度对激光输出功率的影响，给出了一些新的结果。
Some new results are given through investigation on threshold feature of the laser, effect of gas mixture ratio and discharge temperature on the laser output power etc.
通过研究铜空心阴极激光器阈值特性、气体混合比和放电温度对激光输出功率的影响，给出了一些新的结果。
应用推荐