This paper has studied a lot of method and theory about vehicle plate location, character divide and character recognition systemically.
本文对车牌识别系统的车牌定位、字符分割和字符识别进行了系统的研究。
This paper presents an exact solution for a free rectangular plate on elastic foundation by the method of superposition.
本文以叠加法提供在弹性地基上的自由矩形板的精确解。
This paper gives a method of computer aided digitization for map plate-making, introducing its working process and advantages.
本文主要介绍一种采用微机进行地图数字化处理并进行地图制版的方法，阐述了其优越性。
The inhibitory effects of the fermentation broth of Gloeostereum incarnatum have been determined by using the cup plate method and paper chromatography.
采用杯碟法和纸层析的方法，测定了榆耳发酵液对九种细菌的抑制作用。
Under the basis of the analysis to characteristic of toll station vehicle number-plate, this paper presents an improved number-plate locating method based on the characteristics of gray beep points.
该文在对收费站汽车牌照特征分析的基础上，提出了一种改进的基于扫描行的灰度跳变点特征的车牌定位算法。
Boundary element method to calculate the free surface flow over the plate region of the hanged-plate two storied intake work is presented in this paper.
本研究利用边界元法求解了悬板分层式引水渠首的悬板区过流问题。
A new method, which is based on the spiral line equations, for the spiral calculation in the spiral plate heat exchangers was introduced in this paper.
提出了一种基于螺旋线方程的、全新的螺旋板换热器螺旋计算方法，给出该算法的计算公式以及公式的导出过程。
In this paper, the construction method for the hinged steel bearings and hinged sliding plate bearings specially designed for the Bridge is presented.
介绍针对本桥专门设计的铰轴钢支座和铰轴滑板钢支座施工方法。
The method is used in this paper to study the influence of plate width on plate shape, and some varying rules of crown with plate width are discovered.
采用实验的方法对板宽对板形的影响进行了较为系统的研究，发现了板凸度随板宽变化的一些规律。
By the super element method, the back analysis and controllable design of composite material laminated plate including complicated micro-structure were completed in the paper.
文中采用超级元方法，对具有复杂细观构造的纤维增强复杂材料层合板进行单参数反分析及可控性设计。
This paper introduces a non-contacted measurement method of steel plate based on optical image.
本文介绍一种基于光学影像的非接触钢板测量方法。
This paper presents the significance and method of correcting the sharpness of standard orifice plate and gives some suggests for carrying out this work.
本文介绍了标准孔板尖锐度修正的意义及修正的方法，并对实施这一工作提出了新的建议。
In this paper, an optical-sonde system for measuring the shape of a two-dimensional flying plate and the corresponding data treatment method are described.
本文介绍了一种测量二维形状飞片的光探测系统及其数据处理方法。
Manufacture method of anchor bolt plate is introduced and stress distribution in laboratory is analyzed in this paper.
介绍了锚杆测力托盘的制作方法，在实验室对锚杆托盘的应力分布进行了分析。
In this paper, the effect of lignosulfonates on bacteria reproduction rate in recirculated cooling (water) has been studied by plate counting method.
通过平皿计数法研究了不同类型木质素磺酸盐及其组分对循环冷却水中细菌繁殖速度的影响。
In this paper, the dynamic problems of three kinds of space trusses are studied and the general vibration equations are derived by the plate analogy method.
本文利用拟板法对正交正放类、两向斜放类和三向类网架的动力问题进行了研究，导出了一般的振动控制方程。
The dynamic problem of constrained layer damping(CLD) plate was investigated with the transfer function method in this paper.
采用传递函数方法对约束层阻尼板进行了动力学分析。
In this paper, according to the kirchhoff's plate continuance conditions, sample plate interpolation for functions, which is a new interpolating method, is constructed.
文章按照弹性薄板的光滑性要求构造样板插值函数，这是一种可普遍运用于各类问题的插值新方法。
This paper proposes an optimization method on the plate shaving cutter, its optimal solution is the premises matching the smallest toothing Angle on the condition of the last cutting grinding.
本文提出了一种盘形剃齿刀的优化设计方法，其最优解是最后一次刃磨时的最小啮合角对应的条件；刀具寿命期间，保证进入双齿啮合剃齿。
This paper introduces approximate probability method in designing the section of reinforced concrete non-beam plate.
本文是探讨近似概率法在钢筋砼无梁板截面设计中的应用。
This paper deals with the simplified calculating method of the temperature response of the round plate model through the combination of analysis and experiments.
本文通过分析计算和试验相结合，探讨了圆板模型具有单孔输入热量和多孔输入热量时温度响应的简化计算方法。
In this paper, the calculating method for the contact stress of plate CAM mechanism with translating roller moving follower is presented, and some examples are given.
本文详细分析了对心滚子移动从动件盘形凸轮机构接触应力的计算方法，并给出具体计算例题。
A theory and method for calculating the noise level radiated by plate are presented in this paper.
本文提出了一种计算平板结构辐射噪声的理论和方法。
This paper proposed a license plate locating method based on section and region shrinkage thinking.
本文提出了一种基于分块和区域收缩思想的车牌定位方法。
This paper introduced, the method about laser alignment using round zone plate, analysed sources and distribution of the method's error in a systematic way.
本文介绍了波带板激光准直的方法，比较系统地分析了波带板激光准直的误差来源和精度分布情况。
In the paper, the method of active control of radiation sound field from elastic plate by input force is extended to underwater case.
本文把利用输入力有源控制弹性板辐射声场的方法推广到水下情况。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
This paper presents a self focusing filter which is composed of matched filter with sine form and Fresnel zone plate by means of area coded method.
本文介绍用面积编码的方法将滤波函数为正弦函数的匹配滤波器和菲涅耳波带片组合在一起的自聚焦滤波器。
This paper introduces the method of making the steel plate coated with polyvinyl chloride.
本文介绍了聚氯乙烯涂层钢板的制造方法。
This paper discusses how the weld groove and the plate thickness affect the sheet metal manufacture processing, and how to design with reasonable method.
本文阐述了焊接坡口和板厚处理对钣金加工制造工艺的影响，并用合理的方式设计和处理。
应用推荐