The pinion gear is attached to the steering shaft.
该齿轮连接转向轴。
Push and hold ring gear upward while not allowing the pinion gear to rotate.
当不准许主动齿轮旋转时，向上推环齿轮，并放牢它。
Rotate the pinion gear several complete revolutions to align the bearing rollers.
转动主动齿轮若干圈以校正轴承滚柱。
Double bearing Clutch Bell Pinion Pinion gear is now dual ball bearing supported.
前翼齿轮现在是双滚珠轴承承托的。
The only remaining step was to remove the pinion gear from the old motor and add it to the new one.
唯一剩下的步骤是从旧电机拆下小齿轮和将其添加到新的。
A second cable assembly includes a second pinion gear mounted for rotational movement in the housing.
第二线缆组件包括：第二小齿轮，其被安装来在所述外壳内做旋转运动；
The starter motor is a simple direct current (DC) motor which has a pinion gear attached to its shaft.
启动电机是一个简单的直流电机，在它的轴上有一个小齿轮。
A rack-and-pinion gear set is enclosed in a metal tube, with each end of the rack protruding from the tube.
整个齿轮齿条式转向器装载金属壳内，其齿条从转向器伸出来与转向摇臂连接。
The test results show that the average life of gear can increase40%approximately by taking peen shot for rear axle pinion gear.
台架试验表明，采用该喷丸机对后桥主动锥齿轮进行强化喷丸处理，齿轮的平均寿命提高约40%。
The flywheel also has a large ring gear at its outer edge, which engages with a pinion gear on the starter motor during engine cranking.
在飞轮的外缘(压)有一齿环，在发动起动时，齿与起动机的驱动小齿轮啮合。
The flywheel also has a large ring gear at its outer edge, which engages with a pinion gear on the starter motor during engine cranking.
飞轮也有其外缘，并与一对在发动机手摇起动电机齿轮齿圈齿轮搞大。
Changing the number of the teeth of a pinion gear or the hardness of the surface of tooth and other parameters, the different results will be gained.
只要改变小齿轮齿数或齿轮齿面硬度及相应的有关参数，可得到齿轮传动计算的不同结果。
Some cars have variable-ratio steering, which uses a rack-and-pinion gear set that has a different tooth pitch (number of teeth per inch) in the center than it has on the outside.
有些车的转向系角传动比是可变的，这种转向器采用齿轮齿条式，它在中间而不是外部，有不同的齿密度（每寸齿数）。
This article, on the basis of studying the structure of pinion gear assembly and pinion bearing pre-load mechanism, analyses the main factors which have impact on pinion bearing preload.
文章在研究主齿总成结构及主齿轴承预紧原理的基础上，深入分析了影响主齿轴承预紧的主要因素及其影响机理；
A second rack is mounted for linear movement in the housing. The second rack engages with the second pinion gear such that rotation of the second pinion gear linearly moves the first rack.
第二齿条，其被安装来在所述外壳内做直线运动，所述第二齿条与所述第二小齿轮啮合，以便所述第二小齿轮的转动直线地移动所述第一齿条；
For increased accuracy and repeatability, the unit can be supplied with an external anti-backlash POM (polymer) pinion gear which optimizes coupling to the wind turbine's large yaw bull gear.
为了提高其准确度和重复性，该装置被附带一个外部的反侧隙聚甲醛(聚合物)小齿轮，该齿轮可优化风力涡轮机的大偏航从动齿轮。
As one of the individual variable vanes is rotated by an actuation source, the other variable vanes of the variable vane array are rotated a like amount by the rack and pinion gear interface.
当其中一个可变叶片由一驱动源转动时，可变叶片阵列上的其他可变叶片通过齿条和小齿轮的相互作用而转动一个相同的量。
Power will go from the pinion shaft through the differential pinions to only one side gear because the other side gear is stationary.
来自行星齿轮轴的功率通过行星齿轮，只到达一个半轴齿轮，而另一个半轴齿轮保持静止。
The planet gears are actually one set of gears joined together by a cage called the planed gear carrier or planet pinion carrier.
行星齿轮实际上是称为行星齿轮架或行星小齿轮架的保持架连接的一套齿轮装置。
Each crate held a ten-inch round gear and steel pinion that form an essential part of the Tundra rear axles.
每个箱子都装上了10英寸大的圆形零件，这些零件对于丰田汽车的后轴来说必不可少。
Power flows through the drive pinion, ring gear, case, and pinion shaft to the differential pinions. Then power splits equally and goes to the side gears, axle shafts, and drive wheels.
功率经过主动齿轮、从动锥齿轮、壳体和行星齿轮轴来到行星齿轮，然后功率被均分，送到半轴齿轮、半轴，最后到达驱动轮。
Each vane has a gear pinion at its inner end, which interfaces with the gear track.
每个叶片在其内侧端部具有一个小齿轮，其与齿轮通道相互作用。
The motor position is adjustable to accommodate different gears and to allow adjustment of the gear mesh between the pinion and its mating spur gear.
电机的位置是可调节的，以适应不同的齿轮，并允许该小齿轮及其配对正齿轮之间的调整的齿轮的啮合。
The drive pinion is meshed with a large ring gear so that the ring gear revolves with the pinion.
传动齿轮与一个很大的冠状齿轮啮合，传动齿轮驱动冠状齿轮。
The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.
集成型的差速室、准双曲面齿轮的设计中，小齿轮组中心线在环形齿轮的中心线之上。
Within the gear carrier unit, taper roller bearings are employed almost universally for carrying the input pinion.
在齿轮承运人股，圆锥滚子轴承受雇几乎普遍进行输入齿轮。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
针对面齿轮硬齿面磨削加工中存在的困难，提出用蜗杆砂轮磨削的双参数法来磨削面齿轮。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
针对面齿轮硬齿面磨削加工中存在的困难，提出用蜗杆砂轮磨削的双参数法来磨削面齿轮。
应用推荐