Morphology of corrosion presents pitting corrosion character.
腐蚀形貌呈现孔蚀特征。
Pitting corrosion is one of the main manners of corrosion in reinforcement concrete.
坑蚀是混凝土钢筋锈蚀的主要形式之一。
In addition, the forming mechanism of the pitting corrosion of X70 pipeline steel was discussed.
另外，对X70管线钢的点蚀形成机理进行了讨论。
This paper describes the mechanisms and factors of pitting corrosion in automotive heat exchangers.
综述了铝质汽车热交换器的点蚀机理、影响因素以及铬酸盐缓蚀机制。
The mechanism of porous oxygen electrode to accelerate pitting corrosion of bronze ware has been put forwarded.
提出了加速青铜器小孔腐蚀的多孔氧电极机理。
The effect of radiation on pitting corrosion of aluminium in solutions with cupric and chloride ions are studied.
本文研究了辐照对铝在含铜、氯离子溶液中点腐蚀的影响。 结果表明，辐照可以减缓点腐蚀和加速均匀腐蚀；
The pitting corrosion potential of 316 stainless steel increases along with the ammonia nitrogen density decrease.
在模拟中水中，随着氨氮浓度的增加，316不锈钢的孔蚀电位减小。
The results indicated that the resistance to pitting corrosion of mild steel inhibited by molybdate is better than by nitrite.
实验结果表明：钼酸盐比亚硝酸盐对软钢有更好的抗点蚀性能。
Pitting corrosion of steam turbine blading steels: the influence of chromium content, temperature, and chloride lon concentration.
铬含量、温度和氯化物浓度对蒸汽轮机叶片钢点蚀的影响。
The problem of pitting corrosion and crack of stainless steel used in the water tank were studied by simulating service condition.
对不锈钢水箱发生的点蚀与开裂问题进行了分析，并模拟生产工况进行了试验研究。
Pitting corrosion and crevice corrosion in catalyst deposit zone and corrosion deposit zone can also induce stress corrosion cracking.
催化剂沉积区和腐蚀产物沉积区产生的点蚀和缝隙腐蚀会诱发应力腐蚀开裂的产生。
The electrochemical characteristics of pitting corrosion of X70 pipeline steel in phosphate buffer solution were studied in this paper.
研究了X70钢在磷酸盐缓冲溶液中的亚稳态与稳态孔蚀的电化学行为特征。
It was found from the analysis and study of the corrosion failures of refinery storage tanks that the pitting corrosion was the major cause of the failure.
通过对炼油厂储罐腐蚀失效形式的调查分析，得出局部腐蚀是导致储罐失效的主要原因。
Also, the influences of the capillary structure to chloride ion permeability and reinforcement localized corrosion (namely pitting corrosion) are pointed out.
指出混凝土毛细孔结构对氯离子渗透和钢筋局部腐蚀(坑蚀)的影响。
The submerged coupon simulation tests also confirm that sulfate reduction bacteria can also cause magnesium alloy corrosion, which features pitting corrosion.
采用浸泡挂片模拟实验进行研究，发现硫酸盐还原菌可以引起镁合金腐蚀，且腐蚀特点为点蚀。
And the formation mechanism and influencing factors of pitting corrosion were introduced, and the causes of pitting corrosion of 304stainless steel pipeline were analysed.
在对点腐蚀形成的机理和影响因素的详细介绍和304不锈钢点腐蚀原因分析的基础上，提出了对不锈钢管道点腐蚀的预防措施。
The results show the method can effectively enhance uniform and pitting corrosion resistance of magnesium alloy surface, improve stability under moist atmosphere corrosion.
结果表明，该方法可以有效地改善镁合金表面耐全面腐蚀、点蚀的性能，提高镁合金表面在温热潮湿环境下的稳定性。
The surface roughness, pitting corrosion, burn and hydrogen uptake of ECM machined Ti-alloy blades are analyzed and the measures of improving surface integrity are introduced.
本文就钛合金叶片电解加工后的表面粗糙度、点蚀、烧伤及吸氢等问题进行了分析并提出了改善钛合金电解加工表面完整性的措施。
This paper describes the mechanisms and factors of pitting corrosion in automotive heat exchangers. In addition, the anticorrosive mechanism of chromate inhibitors is discussed.
综述了铝质汽车热交换器的点蚀机理、影响因素以及铬酸盐缓蚀机制。
Consequently, pitting corrosion resistance of the welded joint declines obviously and pitting preferentially occurs at ferrite phase in the high temperature HAZ near the fusion line.
焊接接头的耐点蚀性能明显下降，点蚀优先发生在高温热影响区所在的铁素体晶粒内。
The results show, when pitting corrosion occurred on the brass surface, the polarization resistance of electrode was obviously decreased, and the corrosion potential being also obviously lowered.
结果表明，黄铜表面出现点蚀时，电极的极化电阻明显下降，腐蚀电位也明显降低。
The results indicate that the holes of X70 pipeline steel result from pitting corrosion. And the appearance of the pitting corrosion is because of high concentration of Cl - in laminar-cooling water.
实验结果表明，X70管线钢凹坑是由于点蚀腐蚀所引起，而点蚀产生的原因是由于层流冷却水中的氯离子浓度偏高。
Corrosion on Aluminum vessels is also generally in the form of localized pitting to the hull plate, rudders, bilge keels and particularly in way of weld seams.
铝制船舶上的腐蚀的通常形式是船体钢板、船舵、船底龙骨上的局部点状腐蚀，特别是在焊缝方面。
Removing visible surface corrosion before pitting begins (such as during a C-check) helps prevent conditions that can lead to crack initiation.
在出现斑点之前去除可见的表面腐蚀(诸如c -检)有助于预防发生裂纹。
The effects of corrosion can vary from pitting of propellers and shafts to the decomposition of the alloy of propeller.
腐蚀的影响是不同的，可以是螺旋桨或者旋转轴的点状腐蚀，也可以是螺旋桨合金的腐烂。
The most common type of corrosion on aluminum and magnesium alloys is pitting.
铝合金和镁合金最常见的锈蚀腐蚀是疮孔。
Corrosion pitting also can lead to fatigue crack initiation depending on the component, the location of pitting, and cyclic loading conditions.
腐蚀斑点还会因不同的部件、斑点的位置和循环载荷状况，导致一些不同的疲劳裂纹。
Severe corrosion, leading to pitting, is often caused by concentration cells, particularly where differences in dissolved-oxygen concentration occur.
特别在溶解氧浓度有差别的场合，浓差电池常引起严重腐蚀、导致孔蚀。
Advances in life prediction technology for structures suffering localized corrosion such as pitting and stress corrosion cracking are surveyed and discussed.
综述了局部腐蚀如应力腐蚀破裂及点腐蚀作用下设备寿命预测技术的进展。
Advances in life prediction technology for structures suffering localized corrosion such as pitting and stress corrosion cracking are surveyed and discussed.
综述了局部腐蚀如应力腐蚀破裂及点腐蚀作用下设备寿命预测技术的进展。
应用推荐