Sometimes nitrogen are being used oxygen plasma arc cutting of arcs gas.
有时氮气还被用作氧等离子弧切割时的起弧气体。
The NC flame and plasma arc cutting is an advanced heating cutting technique.
数控火焰等离子切割是一种先进的热切割技术。
It offer the reference for improving cutting quality of the numerical control plasma arc cutting machine.
为提高数控等离子切割机的切割质量提供参考。
In the finality of this article an experiment study about plasma arc cutting variable-thickness plate is introduced.
本文的最后部分对等离子体弧切割变厚度板材进行实验研究。
According to the different main gas, mainly divides into argon plasma arc cutting division, the oxygen plasma arc cutting and cutting, air plasma arc type.
根据不同的主要气体，主要分为氩等离子弧切割划分，氧气切割和等离子弧切割，空气等离子弧的类型。
Now the plasma arc cutting machine part on gas pressure to control the flow, because when gun aperture, the gas control certain pressure and you control the flow.
现在的等离子弧切割机大多靠气体压力来控制流量，因为当枪体孔径一定时，控制了气体压力也就控制了流量。
High-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.
血浆高速等离子弧切割技术工程热金属削减部分熔融，并与高流量同样会被熔化的金属吹走，形成一个狭窄的切口。
The principle and adjustment result re of the main circuit, control circuit and program control circuit of our KLG-50 plasma arc cutting machine are introduced in this paper.
本文介绍了KLG - 50型空气等离子弧切割机的主回路，控制电路和程序控制电路的工作原理及调试结果。
This paper analyzes the basic structure, work principle, usages and notice items of PC-60 air plasma arc cutting machine, and lists the common trouble phenomena, causes and solutions.
分析了PC - 60型空气等离子弧切割机的基本结构、工作原因、使用方法和注意事项；例举了其常见故障现象、产生原因和排除方法。
This paper analyses the usage of LGK series of air plasma arc cutting machine, and enumerates the causes and solutions of striking arc, main circuit, gas path and cutting torch breakdown.
分析了LGK系列空气等离子弧切割机的使用方法，例举了其引弧故障、主电路故障、气路故障、割枪故障产生的原因和解决方法。
Plasma arc cutting is a physical process which utilize high temperature to heat materials and high speed flow to blow melted metal, cutting quality is directly influenced by arc power and arc force.
等离子体弧切割是通过高温等离子体弧将工件弧柱部分的材料熔化并利用高速离子流将切渣吹除的物理过程，弧柱的功率和作用力将直接影响到切口质量。
But the argon plasma arc voltage, low enthalpy is not high, cutting ability is limited, and cut the air than the thickness of the cut about 25% lower.
但氩气等离子弧的电压较低，焓值不高，切割能力有限，与空气切割相比其切割的厚度大约会降低25%。
This energy release imbalance, closely related with many process parameters, such as plasma arc compression degree, cutting speed and nozzle to the distance, etc.
这个能量释放的不平衡，与很多工艺参数密切相关，如等离子弧压缩程度、切割速度及喷嘴到工件的距离等。
Because the hydrogen can significantly improve the arc voltage, make hydrogen plasma jet has high enthalpy, when mixed with argon plasma jet, the use of cutting ability is greatly increased.
由于氢气能显著提高电弧电压，使氢等离子射流有很高的焓值，当与氩气混合使用时，其等离子射流的切割能力大大提高。
To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.
为减小切口宽度，提高切口质量，进行了水再压缩等离子弧切割陶瓷实验研究。
This study designed a system to generate ultrasonic-frequency pulsed plasma cutting arc, and experimentally investigated the vibration characteristics of the high frequency pulsed arc.
本研究设计了一种超声频脉冲等离子切割电弧发生系统，并通过实际切割试验，测试、分析了这种高频脉冲电弧的振动特性。
The arc cutting technique of air plasma water re-compressed won the second prize of National Scientific and Technological Progress Award.
科研项目空气等离子水再压缩弧切割技术获国家科技进步二等奖。
The too small gas flow makes plasma arc lost due to the degree and straight cutting depth becomes shallow, but also easy to produce hang slag;
过小的气体流量则使等离子弧失去应有的挺直度而使切割的深度变浅，同时也容易产生挂渣；
The author discusses the faults of the existing plasma cutting machine, difficulty to start arc and to transit from minarc to maxarc, then puts forward a new control scheme based on technical desires.
针对原等离子切割机存在的起弧困难和小弧到大弧的转移不连续的缺点，对原控制装置硬件结构和控制线路进行技术改造，使用结果表明：该装置运行可靠，起弧容易，控制效果好，并且提高了生产效率。
For duplex stainless steel thermal cutting shall be limited to the plasma arc method.
对双相不锈钢进行热切割应该仅限于等离子弧切割方法。
Plasma cutting machine interface reserved; optionally set up all types of plasma cutting machine and arc voltage tracking system, including initial position and automatic arc voltage tracking system.
预留等离子切割机电源接口，可选配各种等离子切割机机型，弧压跟踪系统以及初始定位装置。
And the operation of various gas-shielded welding, ac and DC arc welding machine, stud welding machine, air plasma cutting machines and other ancillary products.
且经营各种气体保护焊机、交直流氩弧焊机、螺柱焊机、空气等离子切割机等配套产品。
This paper introduces the experiment condition and process to carry out hot cutting on silicon nitride ceramics materials with new self-made water-plasma arc equipment.
主要阐述了采用自制新型水介质等离子弧设备对氮化硅陶瓷材料进行加热辅助切削的试验条件及过程。
For inert-gas arc welding, plasma welding, cutting.
惰性气体保护电弧焊接，等离子焊接，切割。
The products of HJ electric are IGBT inverter DC arc welders, IGBT inverter DC air plasma cutting machine, resistance welders, welding wire feeder and other welding and cutting equipment.
瀚金电气的产品包括：IGBT逆变直流弧焊机，IGBT逆变直流空气等离子切割机，电阻焊机，焊接送丝机等焊接与切割设备。
The products of HJ electric are IGBT inverter DC arc welders, IGBT inverter DC air plasma cutting machine, resistance welders, welding wire feeder and other welding and cutting equipment.
瀚金电气的产品包括：IGBT逆变直流弧焊机，IGBT逆变直流空气等离子切割机，电阻焊机，焊接送丝机等焊接与切割设备。
应用推荐