The thin thickness small diameter brass antenna casing is introduced and plastic deformation theory in tension fracture process is analyzed.
介绍了开发研制的黄铜薄壁小直径天线套管，并对拉伸断裂的塑性变形理论进行了分析探讨。
The crack development process is also analyzed with the steel tube plastic deformation theory, and corrective actions are accordingly put forward.
根据钢管塑性变形理论分析了裂纹形成过程，提出了减少裂纹的措施。
For plastic deformation theory, it is assumed that the plastic strain tensor is proportional to the total strain deviation tensor and the ratio is a sealer 'function of the effective total strain.
对于形变理论，假定塑性应变张量与总应变偏量张量成比例，其比例因子是总有效应变的标量函数。
The paper has studied straightening stress and residual deformation of circular shaft by using elastic - plastic theory, deueloped calculation formula of straightening loud in given deflection error.
从弹塑性理论出发以圆截面轴为例对校正应力与残余变形进行了分析研究，提出了在给定弯曲误差下的校正载荷的计算公式。
The theory of statistical dislocation link length distribution is an active field in the modern microscopic quantitative theory of metal plastic deformation.
变形金属位错链长度统计分布理论是现代金属塑性变形定量微观理论最活跃课题之一。
From the plastic flow theory, the three-dimensional deformations and stresses of the deformation zone are formulated.
根据塑性力学流动理论，分析推导了变形区三维变形和应力的数学模型。
It bases on the classical plastic theory, and the components of wetting deformation under complicated stress state may be determined clearly.
该模型依据经典塑性理论，能够明确指定复杂应力状态下湿化变形的各分量。
The elastic plastic deformation and stresses of the micro composite are studied according to the shear lag theory and strain-hardening law.
按剪滞理论和应变硬化规律研究微复合材料的弹塑性变形和应力状态。
The theory of liquid metal die forging is the understanding of the process which combines solidification under high pressure with forced feeding by plastic deformation.
液态模锻理论是对高压下结晶凝固和塑性变形下强制补缩复合过程的认识。
The joint deformation of DC upset butt welding was studied by using theory of plastic deformation and rigid-viscosity plastic material model.
采用塑性变形理论和刚粘塑性材料模型研究了直流电阻对焊接头的塑性变形。
According to the character of hydraulic bulge and the theory of plastic deformation, a testing method of hydraulic bulge to evaluate the forming property of sheet metals is put forward.
本文根据液压胀形的特点，利用塑性变形原理，提出评定板材成形性能的液压胀形试验法。
The generalized slip-line theory is advanced, which develops the classical slip-line theory and can be used to solve all two-dimensional problems and axisymmetric plastic deformation problems.
提出了广义滑移线法，将经典滑移线理论拓展到能求解所有二维问题和轴对称塑性变形问题；
In the classical theory of plasticity strain is separated into elastic and plastic components, but this approach cannot deal satisfactorily with the soil deformation.
经典塑性理论把应变分成弹性应变及塑性应变两部分，不能圆满说明土的塑性变形性质。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
Based on the theory of elastic-plastic deformation, according to the finite element method, this paper presents a nonlinear analysis of the distribution of the soil pressure of the ditch conduit.
表明对大型沟埋式管道的上压力，采用弹塑性理论的非线性分析是比较符合实际的，其结果可供设计参考。
In this paper, an edge-cutting AIA method is presented based on elastic-plastic large deformation finite element simulation theory.
针对板材三维冲压成形的切边回弹问题，提出了基于大变形弹塑性有限元数值模拟理论的切边处理AIA方法。
The Analytical Solution of G. I. Taylor's Theory of Plastic Deformation in impact of Cylindrical Projectiles and its Improvement.
柱形弹体撞击塑性变形的G.I。泰勒理论的分析解及其改进。
The theory of residual plastic strain can be used to predict the distortion of simple components, and the reverse deformation is an effective method for controlling the welding distortion.
通过对实例的分析，表明对于简单构件的激光焊接，残余塑变理论可以用来预测变形，反变形法是控制焊接变形的有效方法。
In this paper, the basic theory and method about plastic deformation straightening technology of shafts together with the automatic straightening processing technology are studied and discussed.
本文对轴类零件塑变校直技术的基础理论、基本方法和自动化校直加工技术进行了较为深入的研究和探讨。
In this paper, the basic theory and method about plastic deformation straightening technology of shafts together with the automatic straightening processing technology are studied and discussed.
本文对轴类零件塑变校直技术的基础理论、基本方法和自动化校直加工技术进行了较为深入的研究和探讨。
应用推荐