Further, the present invention provides a product plated on the polymer materials for shielding electromagnetic wave according to said novel plating method.
此外，按照上述所说的上镀方法，本发明提供了一种在聚合物材料上上镀的产品，该产品可用于电磁屏蔽。
Kocour Company offers a complete selection of Hull Cells, accessories and related equipment to enable the plater to effectively use this plating process control method.
科楚尔公司提供一个完整的选择船体细胞配件及相关设备，使之拼盘有效地使用这一工艺控制方法。
The interaction process between current collector treated electroless plating indium and various mercury-free zinc powders was studied by a method of dynamic measuring exhaustion hydrogen.
采用析氢量动态测试方法研究了化学镀铟集流体铜钉与不同产地无汞、低汞锌粉相互作用的动态过程。
A method to prepare one dimensional nanoscale composite based on coating of carbon nanotube with Ni by electroless plating is proposed.
利用化学镀方法在纳米级碳管表面化学镀镍，得到新一类一维纳米复合材料。
This paper introduces the chemical plating method of preparing heat-reflecting glasses.
本文介绍了用化学镀制备热反射玻璃的方法。
This paper, with orthogonality designing the experiment and finding the parameters through optimizing method as well, mainly discusses the chemical plating technology on the ceramics.
通过正交原理设计试验及优化方法寻找最佳参数，对陶瓷表面化学镀工艺进行了研究。
Multi-Arc Ion plating technology is an improved method of Ion plating and it is a surface coating technology that uses arc as the fountain of vaporizing.
多弧离子镀技术是离子镀技术的一种改进方法，它是把弧光放电作为金属蒸发源的表面涂层技术。
Results showed that the method, characterized as simple, rapid, little interfere and high accuracy and precise, was suit to monitor the Pb concentration in plating process.
结果表明，该方法简便、快速、干扰小，测定的准确度和精密度高，适用于电镀过程中铅浓度的跟踪测定。
The corrosion resistance of deposits and covering power of the plating bath were tested respectively by neutral salt spray test and inner-pole method, and the hardness of deposits was also measured.
采用中性盐雾试验测定了镀层的耐蚀性，采用内孔法测定了镀液的覆盖能力，并测定了镀层的硬度。
Concentration of boric acid in bright sulfate zinc plating bath was determined referring to the same method for chloride type zinc plating bath.
将氯化物镀锌液中硼酸的测定方法用于测量光亮硫酸盐镀锌液中硼酸的含量。
The processing technology of electroless copper plating on graphite powders by iron powder method and formaldehyde method were studied and evaluated.
研究比较了两种化学方法——铁粉法和甲醛法在石墨粉表面镀铜的工艺。
The technique of aluminising on brass by powder plating method has been studied.
采用粉末渗镀法，研究了黄铜渗铝工艺。
This paper mainly studies the measuring method for the thickness of plating layer ofthe eddy-current sensor in the case of the multi-frequency and multi-parameters.
主要研究了电涡流传感器在多频率多参数下镀层厚度的测量方法。
The technological control method of Nickelex and technology of plating bath purification are briefly discussed, that can give a reference for other technologists in this industry.
通过对光亮镀镍工艺管理方法与槽液净化技术的浅显探讨，为同行提供一种工作方法。
A control method based on neural network for pulse plating power is presented, and a mathematical model of the pulse transformer is established.
提出了一种用于脉冲电镀电源的神经网络控制器，并对脉冲变压器建立了数学模型。
A method for continuous titration of boric acid and nickel chloride in bright nickel plating bath was presented.
介绍了一种光亮镀镍液中硼酸和氯化镍的测定方法。
Two mixing cultures of cellulose decomposing microorganisms, M1 and M2 were isolated by filter paper plating and shaking method.
滤纸平板法结合摇床培养筛选到2个纤维素分解能力较强的混合菌m 1和M2。
Zinc and cobalt content in zinc cobalt alloy plating bath are determined by the combined method of titration with EDTA and spectrophotometry.
采用EDTA滴定和分光光度相结合的方法测定碱性锌钴合金镀液中的锌、钴含量。
The initial stages of the electrocrystallization of zinc onto vitreous carbon from chloride zinc-plating solutions were investigated using linear sweep voltammetry and potential step method.
线性扫描伏安法和电位阶跃法被用来研究氯化钾镀锌溶液中锌在玻璃碳上电结晶的初期阶段。
Rare earth improved electroless plating method was developed for simultaneously depositing Pd-Ag alloy film on ceramic support.
采用稀土改进的化学镀法在多孔陶瓷载体上共沉积钯-银合金膜。
The alloy plating method to get the melt method than the average of the alloy get high hardness, good abrasion resistance, such as nickel and cobalt nickel alloy-phosphorus alloys, etc.
电镀法得到的合金比一般热熔法得到的合金硬度高、耐磨性好，如镍-钴合金和镍-磷合金等。
Ingredients of the bath processing parameter and coloration method are studied deeply with respect to colored electroless Nickle plating on 45steel.
本文对45钢彩色化学镀镍磷的镀液成分、工艺参数、着色方法进行了比较深入的研究。
The theoretical basis, the testing device and the measurement result of testing the thickness of plating film automatically with capacity method are introduced.
文章介绍了应用容量法自动测量镀膜厚度的理论依据、测试装置和测量结果。
Rhodium in rhodium plating bath was determined by spectrophotometric method using potassium iodine and stannous chloride as chromogenic agent .
以碘化钾和氯化亚锡作显色剂，用光度法测定镀铑溶液中的铑。
The paper has made a study with laboratory method on the effect of chemical plating of Ni on the thermal fatigue property of cast iron.
采用实验室手段探索了表面化学镀镍对提高铸铁热疲劳抗力的作用。
Compared with the pollution of the traditional plating or spray coating method to the environment, the vacuum sputtering is environmental process and accords with ROHS standard completely.
相对于传统水电镀或喷涂方式对环境的污染，真空溅射是环保制程，完全符合ROHS标准。
An analytical procedure and calculation method on the content of copper, total pyrophosphate, phosphate and ammonium citrate in pyrophosphate copper plating bath were given.
介绍了一种焦磷酸盐镀铜溶液中铜、总焦磷酸根、磷酸根、柠檬酸铵含量的分析方法和计算方法。
At the same time, the method that combines composite electroless plating with metal spraying mold making to increase the wear resistance and operating life of composite mold is also proposed.
同时提出，将化学复合镀与金属喷涂制模技术结合起来，可以提高复合材料模具的耐磨性及使用寿命。
At the same time, the method that combines composite electroless plating with metal spraying mold making to increase the wear resistance and operating life of composite mold is also proposed.
同时提出，将化学复合镀与金属喷涂制模技术结合起来，可以提高复合材料模具的耐磨性及使用寿命。
应用推荐