The S Series is a stainless steel NFPA Interchangeable pneumatic cylinder line.
系列为不锈钢消防协会可互换气缸线。
Four-Way Diaphragm Pilot Valves are for use on all double-acting pneumatic cylinder actuators.
四通 手动控制阀可用于所有气动或液动双作用缸体执行器。
Pneumatic cylinder line that is designed and built to excel in the most challenging valve actuator applications.
气动缸线是设计和建造到Excel中最具挑战性的阀门执行器的应用程序。
The dynamic model of PMA system was developed easily according to the new concept and the dynamic model of pneumatic cylinder.
提出将气动人工肌肉视为带有弹性负载的变截面气缸的观点，方便地建立了气动人工肌肉系统动态数学模型。
Pneumatic cylinder sensor calibration system to control the filter cloth displacement principle of operation in a certain range.
带式污泥脱水机空压气缸感应校正系统，以位移原理控制滤布运转于一定之范围内。
In this article it is shown that the position of a piston in the pneumatic Cylinder can be controlled by using modulated pulses.
本文表明可用脉冲信号来控制气动活塞的位置。
Pneumatic cylinder sensor calibration system to control the filter cloth displacement principle of operation in a certain range.
空压气缸感应校正系统，以位移原理控制滤布运转于一定之范围内。
Chicago cylinder has grown into a thriving company that sets a standard for the highest quality pneumatic cylinders in the industry.
芝加哥气缸已经成长为一个欣欣向荣的公司，规定了最高质量标准的行业气动缸。
The mechanism driven by a bidirectional pneumatic cylinder for climb robot is composed of two groups of slider-crank mechanism in series.
本机构由两组曲柄滑块机构串接而成，双作用气缸驱动，实现机械手的主爬升运动。
According to analysis, a new type of highspeed pneumatic cylinder is designed, which has built-in cushion valve with supply pressure feedback.
根据分析结果，研制了内置供气压力反馈缓冲结构的新型高速气缸。
Based on the conventional life test of a small high-speed pneumatic cylinder, a failure model is determined through failure mechanism analysis.
以某小型高速气缸白勺常规寿命试验为基础，通过对气缸白勺失效机理分析，确定其失效模型。
In the paper, a cast iron seal used in high temperature pneumatic cylinder is introduced. Its operating principle and design method is described.
本文根据转炉气动挡渣器回转气缸的工作环境特点，对其气缸活塞的密封进行了改进设计。
The straight line motion of two actuators was substituted by two directive motion of one pneumatic cylinder, which made the machine more economic and more compact.
一个气缸的双向运动代替两个执行元件的直线运动使其经济合理结构紧凑；
When being used, the pneumatic cylinder is driven by the liquid injecting motor, and quantitative corrosion liquid drops are arranged on the passing aluminum foil strip.
该刮除碳粉装置还设置有一个注液马达；所述的注液马达活动地移动在底座的前端；
To take the best effectiveness of this valve, it is recommended to be installed at the air port of the pneumatic cylinder, this will remarkably increase the speed of the cylinder.
为了能有效地利用此阀之特性，此阀应直接安装在气压缸之气口上，对于提高气压缸运动速度的效果尤为明显。
Then listed some possible methods which enhance the movement frequency of a ready-made pneumatic cylinder used in the practice, and put forward the concept for most effective methods.
由此列出了提高用于实践中现成气缸的运动频率的一些可能方法，并提出了最有效方法的概念。
This paper researched and analyzed the reason why pneumatic cylinder crawled during the work of liquid automatic filling machine and puts forward the solution that deals with the crawl.
对液体自动灌装机中气缸出现的爬行现象进行了研究与分析，并提出了解决气缸爬行的措施。
With this model the distribution of the reliability of the pneumatic cylinder is obtained, which provide a feasible method for quantitative analysis of the reliability of the pneumatic cylinder.
应用此模型可以得到气缸白勺可靠度分布，为气缸白勺可靠性定量分析提供了一种可行白勺方法。
The use of pneumatic actuator cylinder piston and crank conversion structure, output torque, small size fine.
气动执行机构采用活塞式气缸及曲臂转换结构，输出力矩大，体积精小。
Pneumatic PWM position servo system is nonlinear system. The satisfied results are difficult to be obtained with traditional control method while the friction force of cylinder is large.
气动脉宽调制位置伺服系统是非线性的系统，在气缸摩擦力较大的情况下，采用传统的控制方法难以取得满意的效果。
The result obtained is helpful for the design and application of pneumatic cushion cylinder.
所得结果对设计和使用缓冲气缸具有一定的实际意义。
Pneumatic cushion cylinder is the most common actuator in pneumatic transmission systems.
缓冲气缸是气压传动系统中最常用的一种执行元件。
General pneumatic electromagnetic guide, the process of performing actions cylinder can also be manually controlled pilot valve cylinder process of the implementation of the action.
一般气动是电磁先导、气缸执行动作的过程，也可用手控制先导阀气缸执行动作的过程。
In pneumatic technology, the speed of cylinder is an important technical parameter. The paper analyzes the lowest steady speed (no stick-slip effect) and the utmost speed the cylinder can reach.
气动技术中气缸运动速度是一个重要技术参数，本文对气缸能达到的最低无爬行状态的速度和高速运动时的最高速度进行了分析。
Air or gas cylinder actuators include single or double acting, fail open or closed by mechanical spring or pneumatic force. They can be manufactured to accommodate any length stroke.
空气或燃气缸体执行机构包括单动或双动，由机械弹簧或气动力实现故障开启或关闭等各种类型。
This paper introduced a heavy load and super-length journey, high stability required lift telescopic cylinder and the principle of its pneumatic (gas drive) control system.
本文给出了负载较大、行程超长、稳定性要求高的举升式伸缩气缸及其气动控制系统的原理及部分关键部位的优化设计方案。
In pneumatic position servo system with proportional directional control valve and control cylinder, the centre adjust emt voltage is one of the important factors that influence control precision.
在比例方向阀控缸气动位置伺服系统中，置中电压是影响控制精度的重要因素之一。
In the application of pneumatic system, the reliability of cylinder as an executive mechanism most of time is a precondition for security of the whole system.
在气动系统应用中，气缸作为最多白勺一种执行机构，其可靠性是实现整个系统安全、可靠白勺前提。
The pneumatic servo positioning system, which is composed of rodless cylinder and the servo valve, is studied on mathematical modeling and control in this paper.
本文对由伺服阀和无杆气缸组成的气动伺服位置控制系统进行了数学建模和控制研究。
The pneumatic servo positioning system, which is composed of rodless cylinder and the servo valve, is studied on mathematical modeling and control in this paper.
本文对由伺服阀和无杆气缸组成的气动伺服位置控制系统进行了数学建模和控制研究。
应用推荐