The essence of condensation is the droplet deposits in pneumatic system.
结露现象的本质为空气中凝结的水滴沉积在系统内部而造成的。
The pneumatic system is used for tightening steel belt, easy for adjusting.
钢带张紧为气动张紧，包证张紧力可调。
Electromagnetic valve of pneumatic system adopts conflux boards so as to reduce space.
气动系统电磁换向阀采用汇流板集装方式，减少了占用空间；
Studied on and designed the pneumatic system for the spiral bevel gear burnishing machine.
该气动在国内是首次研究应用于数控螺旋锥齿轮研齿机。
And the designing method has universal significance for optimal design of pneumatic system.
这种方法对气动系统的优化设计具有普遍意义。
Adjustment for upper corrugating roller, pressure roller, and glue roller, is controlled by pneumatic system.
上瓦楞辊、压力辊及上浆辊升降以气压控制。
Work with NPD manufacturing engineer on line setup, specially on power supply, pneumatic system and ESD system.
和新产品导入工程师一起完成生产线的布局建立，特别是电，气和防静电系统。
And basic design technique of pneumatic system of Automotive welding line is discussed combined with the practice.
结合实践，探讨了汽车焊装线气动系统的基本设计技术。
The design of pneumatic system and CAT system for integrative test stand are systematically presented in the paper.
本文较系统地介绍了测试台气动系统和CAT系统的设计。
The pneumatic system of the brake system consists of four air circuits according to the brake function requirements.
根据该制动器的功能要求，所研制的该制动方式的气路系统由四条气路组成。
The machinery structure, pneumatic system, PLC controller system of pneumatic materiel conveying system were introduced.
介绍了采用气动元件的物料搬运系统的结构、气动系统及其PLC控制系统。
The working principle and the pneumatic system of this equipment were introduced. The pneumatic chart was also presented.
对该设备的工作原理和气动系统作了详细的介绍并给出了气路图。
The content of the paper can give some refernce for the research of the internal condensation of vapor in pneumatic system.
文章的研究为气动系统结露现象的内部结露研究提供了理论依据。
Design the principle of the pneumatic system of automatic work-piece carrying mechanism of the precise straightening press.
设计了精校机自动送料机构气动系统原理图，并进行了系统的设计计算和气动元件的选择。
The successful and effective operation of pneumatic system depends primarily on the appropriate selection of feeding device.
应用气力输送技术输送物料的成功并有效运转与否，首先取决于选定的供料装置是否恰当。
Air CLEANER, a component in the pneumatic system for removing dirt from the engine air supply to the air conditioning system.
空气清洁器，气源系统里的一个部件。用于去除供空调系统使用的发动机引气中的灰尘。
But the control performance of the pneumatic system is not very good because of its inherent non-linearity and low-stiffness.
但气动系统由于其固有的强非线性和低刚度的弱品质，使得其控制性能和效果不太理想。
Air CLEANER, a component in the pneumatic system for removing dirt from the engine air supply to the air conditioning system.
气源系统里的一个部件。用于去除供空调系统使用的发动机引气中的灰尘。空气清洁器。
BLEED valve, a valve in the pneumatic system for air supply from the engine or auxiliary power unit to the pneumatic manifold.
引气活门，气源系统内，使来自发动机或辅助动力装置的空气进人气源支管的活门。
MPACT is a pneumatic system that generates the high-pressure, compressed air required to jettison weapons from various military aircraft.
MPACT是一种气动系统，能产生高压，它能压缩空气，用于从各种军用飞机上投放武器。
The structure control systems includes the dividing plate which have four work station, pneumatic system, machining working process.
结构上主要包括四工位分度盘、气动系统、加工流程的设计。
The pressure and the quality of glue can be regulated by pneumatic system according to the type of glue and the material of work piece.
压力和胶水的质量可以根据胶水类型和工件材料调节气动系统。
The authors put forward a Multicylinder Energy-Saving Pneumatic System of Direct energy Transfer (DETS) which may save about 50% of energy.
作者曾提出一种直接能量转换的多缸节能气动系统，它可节能近50%。
This essay describes the defects of pneumatic system of new anode furnace driving unit used in Guixi Smelter and how to solve these defects.
前言：本文叙述了贵溪冶炼厂新阳极炉驱动装置气动系统存在的缺陷及改进措施。
According to the technique request of pulp-mold produce line, the pneumatic system has been analyzed by the way of signal-action state graph.
根据全自动纸浆模塑生产线的工艺要求，采用信号—动作状态图法对气动系统进行分析与设计。
This thesis introduces the tests of computer PCM control in pneumatic system, and conclades that PCM control is an effective controlling method.
介绍对气动系统的单片机PCM（脉码调制）控制进行的实验研究。
It adopts pneumatic system and special mechanism. It has features of high precise, no dislocation, faultless, easy maintenance and high efficiency.
采用气动控制系统和独特的机械结构，具有组角准确，不错位，故障点少，易维护维修，加工效率高等特点。
This paper introduces the features of a computer-controlled testing device for pneumatic directional valve and pneumatic system tests and measurements.
介绍一种采用计算机控制与检测气动换向阀试验台的特点和测试系统设计。
This paper introduces the features of a computer-controlled testing device for pneumatic directional valve and pneumatic system tests and measurements.
介绍一种采用计算机控制与检测气动换向阀试验台的特点和测试系统设计。
应用推荐