In this paper, yttrium can be successfully incorporated into the framework of mesoporous zirconia by a surfactant-assisted method and a post-treatment process.
作者利用表面活性剂辅助模板及后处理工艺成功实现了过渡金属钇在有序介孔氧化锆骨架中的掺杂改性 。
The application of flotation for the removal of humic compounds was investigated by using it as a possible post-treatment process of simulated landfill leachates after biological treatment.
生活垃圾渗滤液经生物法处理后含有较多的难降解腐殖质，为此开展了利用浮选法去除渗滤液中腐殖质的后处理研究，并考察了影响浮选效率的主要因素。
Using the neural network and genetic algorithms approaches, the SLS sintering process and its post-treatment process have been simulated and optimized on the basis of a series of experiments.
本文在大量试验研究的基础上，应用神经网络方法和遗传算法对SLS的烧结过程和后处理过程进行了模拟和优化研究。
In addition, some problems relating to post treatment, passivation process and waste water treatment are also discussed.
最后还研究了镀后的钝化处理工艺及废水处理方面的一些问题。
And it presents the implement process and technological point of miniature modified - atmosphere chain technology, according to commercial treatment steps of post - harvested fruits and vegetable.
根据采后果蔬商品化处理步骤，提出了微型气调链技术的实施流程和技术要点。
As a typical chemical treatment process, the textile post-treatment, which contains some hazardous chemical substances, may do harm to health or bring adverse influence on the environment.
纺织品后整理加工作为一个典型的化学处理过程，后整理剂中有一些品种有可能危及人体健康或破坏生态环境。
Solderability of Sn Pb alloy deposit is determined by electroplating process and its maintenance, post treatment rinsing, storage of MLCI, etc.
MLCI端头电极锡-铅合金电镀工艺及维护、镀后的清洗、MLCI的储存影响镀层的耐焊性和可焊性。
The spinning process and some special post-treatment methods of composite fiber are introduced. The application of composite fiber in various fields is summarized.
介绍了复合纤维的纺丝工艺以及一些特殊的后处理方法，对复合纤维的应用进行了综述。
The existing problems of black phosphating process for solenoid valve were analyzed, including unstable phosphating quality, imperfect technics, incongruous rack design and low post-treatment quality.
分析了电磁阀本体黑色磷化工艺存在的问题，包括磷化质量不稳定，工艺不完善，挂具设计不合理、后处理质量低等。
Compared with the other RP process, SLS has attracted extensive attention due to its fast building speed, wide range of materials, simple post-treatment et al.
相对于其他快速原型技术而言，SLS由于制造速度快、用材广泛和后处理工艺相对简单而备受关注，并且应用领域日益拓宽。
Influences of parameters for oxidizing process, pre and post treatment procedures and material status of brass substrate on quality of chemical conversion film on brass were described.
介绍了氧化工艺参数，前、后处理工序，黄铜基体材质状况等因素对黄铜化学转化膜质量的影响。
A complete bright silver plating process for deluxe tableware including chemical polishing, mechanical polishing, degreasing, cleaning, nickle plating, silver plating and post-treatment is suggested.
介绍餐具光亮镀银的全套实用工艺，包括化学抛光、机械抛光、除蜡、除油、镀镍、镀银、以及镀后处理等。
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
The passivation process defined in 3.1.1.2 will occur without further chemical treatment, but may be augmented and improved by the post-cleaning treatments defined in 3.1.1.3.
钝化过程（在3.1.1.2说明）在没有进一步的化学处理情况下也会发生，但钝化作用将会被“后清洗处理”（在3.1.1.3说明）提高增强。
The experiment results showed that the post treatment time was shorten and separated process was easy by improvement the condition of post treatment.
通过对后处理条件的改进，产品分层快且易于干燥，后处理时间缩短；
The process is characterized by simple operation, easy post-treatment, high yield, low cost, and the like, and has considerable economical and practical value and broad application prospect.
该工艺具有反应操作简单、后处理容易、收率高、成本低等特点，具有可观的经济实用价值和广泛的应用前景。
The method has simple process, and fully saves plenty of energy consumption and complicated post-treatment procedures of other methods for preparing fluorine resin.
本发明工艺简单，完全省却了其他方法制备含氟树脂大量的能耗及复杂的后处理过程。
Without high-energy consumption and high-pollution process flows such as ceramic plating process post-treatment, the method saves energy and is favorable for protecting the environment.
本发明没有镀陶工艺后期处理等高能耗、高污染的工艺流程，既节能，又有利于环境保护。
Reverse Logistics in the process of implementing the basic principle is "prevention more important than ex post treatment" that is "prevention first, combining prevention with control" principle.
逆向物流施行过程中地根本准绳是“事前防备重于过后处置”即“预防为主、防治分离”地准绳。
The effective method to improve the impact ductility of this zone is to change the welding process and conduct post-weld heat treatment, which is help to divide M-A component into ferrite and carbide.
改善焊接工艺或进行焊后热处理，使M - A组元分解成铁素体和碳化物是提高其韧性的有效方法。
Welding does not occur after pores, collapse, thermal strain and microstructure changes and so on. Significantly reduce post -weld treatment process.
激光焊点直径小、受热范围小，焊后不会出现气孔、塌陷、热应变及金相组织变化等现象，极大减小焊后处理工序。
Welding does not occur after pores, collapse, thermal strain and microstructure changes and so on. Significantly reduce post -weld treatment process.
激光焊点直径小、受热范围小，焊后不会出现气孔、塌陷、热应变及金相组织变化等现象，极大减小焊后处理工序。
应用推荐