The paper introduces improved finishing process of oil tank. This coatings system improves the fullness of the appearance and reduce the cost of finishing of tanks.
文章介绍了改进工艺后的油箱涂装，该涂装体系提高了油箱外观的丰满度，降低了油箱涂装的生产成本。
The liquid-position sensor working principle of brake-used oil tank, structural design of floater products, mold design, foam material as well as foam forming process are introduced.
介绍了刹车油箱液位传感器工作原理、浮子产品结构设计、模具设计、发泡材料用料、发泡成型工艺等方面内容。
Normally, Hackett ends the primary fermentation process by "crashing the tank" -lowering the temperature to shock the yeast into dormancy.
一般情况下，哈科特会用“塌箱”(crashingthe tank)来结束这次酿造试验，也就是通过降低温度让酵母进入休眠状态。
Most digital products today emerge from the development process like a creature emerging from a bubbling tank.
目前，多数数字产品的开发过程就像怪物从咕咚冒泡的容器中诞生一样。
In addition to optimizing the size of RBC process equipment, it also reduces the required size of the secondary clarifier and chlorine contact tank.
除了优化rbc工艺设备型号，预处理也可以减少二沉池和氯滤池的型号。
In this paper, a predictive control strategy based on neuro-fuzzy model is applied to Continuous Stirred Tank Reactor (CSTR) process, which has characteristic of highly nonlinearity.
针对具有高度非线性特性的连续搅拌反应釜(CSTR)控制过程，研究了基于神经模糊模型的预测控制策略。
The large tank volume tends to minimize variations in paint or process.
槽的容量很大，使涂料或工艺参数的波动减少到最小。
There exists serious scaling in the air-agitated tank used in the process of seed precipitation.
晶种分解过程中采用的空气搅拌式种分槽存在结疤严重的缺点。
Chapter 3: Present the theory of the analysis of stability and computation on regulation process to the system of hydropower station with surge tank of many units sharing in one tailrace tunnel.
第3章，阐述了多机一洞水电站水力调速系统的稳定分析和调节过程计算理论。
Process technology of oil collection system was theoretically analyzed in the oil tank area. It provides theoretical base of commercial application.
从理论上对罐区集油系统工艺技术进行了分析，为工业应用提供了理论依据。
HCH-192 unsaturated polyster resin moding process is winding glass pipe and tank products specifically developes a type of benzene resin.
192不饱和聚酯树脂是为缠绕工艺成型玻璃钢管道、贮罐制品专门开发的一种邻苯型树脂。
Measures are taken to both intrinsic safety and process, and put forward some suggestion, so as to insure safety of tank farm of liquefied petroleum gas.
为确保液化石油气罐区的安全，在本质安全与工艺安全两方面采取措施，并提出一些建议。
The PAN-1 high effective flocculant not only raised the capacity of settling tank in sintering process, but also lowered overflow suspensions and reduced water into the process.
PAN-1型高效絮凝剂在试验过程中，不但提高了烧结法分离沉降槽的产能，而且降低了溢流浮游物，减少了进入流程中的水。
Improve the structure of absorber in cryo- insulated storage tank, change the filling process of sieve sorbent, so as to decrease the difficulty of activation of sieve sorbent in an insulated space.
通过对低温绝热贮罐罐体的吸附器结构的改进及其分子筛充装工艺措施的完善，较好地解决了在绝热空间其分子筛活化、 再生困难的问题。
Though the technological analysis of the structure of the accumulator tank , the structure and working process of the injection mould for the type of parts are determined.
通过对蓄电池槽结构的工艺分析，确定了该类制件的注射模结构、工作过程，并对其设计特点进行了介绍。
Due to the technical improvement of several years ago, transportation through Golmud-Lhasa pipeline has undergone the transition from the floating tank process to the tight line process.
格拉管线几年前进行了维持性技术改造，实现了由“旁接罐”流程为主向“泵到泵”密闭流程为主进行顺序输油的转变。
Analyse thermodynamic process in liquefied oxygen tank under emergency, establish mathematic-physical mode of underwater discharging of liquefied oxygen and vaporized oxygen.
分析了紧急情况下储罐内发生的热力学过程，建立了水下排放液氧和气氧过程的数学物理模型。
The element concept and some key problems of reverse engineering are elaborated. The design process of motorcycle fuel tank based on Reverse engineering is produced.
简明阐述了逆向工程技术的基本概念及几个关键问题，介绍了基于逆向工程的产品设计开发过程。
A model of five-bubble-stirred-tank reactor (BSTR) for industrial uncatalyzed oxidation process of cyclohexane was established to predict and optimize the the industrial production.
论文针对环己烷液相无催化氧化的五釜串联鼓泡搅拌反应器生产装置(BSTR)，建立了氧化装置的过程数学模型。
An analysis is made of the present status of production of DAP by the mixed process of preneutralization reactor tank-pipe reactor, as the moisture content of the product fluctuates greatly.
针对预中和反应槽-管式反应器混合工艺生产磷酸二铵产品时，产品水含量波动较大的生产现状进行了分析。
Most digital products today emerge from the development process like a creature emerging from a bubbling tank .
目前，多数数字产品的开发过程就像怪物从咕咚冒泡的容器中诞生一样。
Through study on the influencing factors in coking waste water treatment process, AAO waste water treatment process is optimized, the anaerobic tank has been modified.
通过对焦化污水处理过程影响因素的研究，优化了aao污水处理工艺，对厌氧池进行了改造。
Brine refining process is summarized. Related to the brine purification process in clarifying tank, methods to improve the output and purification effect are introduced.
综述了盐水精制过程，浅析影响因素，结合澄清桶内盐水净化过程，探讨提高出力和净化效果的一些措施。
The welding procedure is strictly observed during tank welding process, thus the welding quality is guaranteed and the welding efficiency is increased.
施焊过程中通过严格执行工艺规范，既保证了焊接质量又提高了焊接效率。
The existing refinery wastewater treatment process was optimized by replacing the membrane bioreactor (MBR) after the contact oxidation tank.
对炼油废水处理场现有工艺进行流程优化，将MBR装置调整在接触氧化池之后运行。
In this paper, its own sewage treatment works in one-the final sedimentation tank round a little experience of the design process.
本文结合自己在某一工程污水处理—圆形终沉池设计过程的一点体会。
The effects of different insulation, tank pressure and injection situations on the precooling process were investigated.
研究了输送管壁不同绝热条件、贮箱增压及气体引射对自然循环预冷过程的影响。
The effects of deep refiner were investigated in this paper:it accelerates the melting process and economizes thermal energy in tank furnaces.
本文论述了玻璃池窑中深澄清池对加速玻璃熔化过程及节约能耗的作用，并指出了应用深澄清池应注意的问题。
Introduces the process design, equipment arrangement, selection of materials and design measures for glacial acetic acid tank farm.
介绍冰醋酸罐区的工艺设计、设备布置、材料的选用及设计中采取的措施。
Introduces the process design, equipment arrangement, selection of materials and design measures for glacial acetic acid tank farm.
介绍冰醋酸罐区的工艺设计、设备布置、材料的选用及设计中采取的措施。
应用推荐