Suitable process conditions for synthesis of 2,5 dimethylhexane 2,5 dihydroperoxide were investigated.
研究了2，5-二甲基己烷-2，5-二氢过氧化物合成需要的适宜的工艺条件。
The optimum process conditions have been investigated too.
探讨了该反应的最佳工艺条件。
The optimized process conditions for producing FOS were obtained.
得到低聚果糖生产的优化工艺条件。
The process conditions were selected by using the orthogonal design.
设计正交试验优化合成二氧化钛的条件。
Selection of appropriate manufacturing method and process conditions.
成膜方法的选择及适合加工工艺的确定。
Orthogonal experiment is used to determine the optimal process conditions.
通过正交实验，确定了最优化工艺条件。
Objective: to optimize extraction process conditions for Yishenkang granules.
目的：优化益肾康颗粒剂提取工艺。
The optimum bath formula and process conditions were obtained by Hull Cell test.
通过赫尔槽试验优选出最佳镀液配方和工艺条件。
This paper studies the process conditions and flow of rice wine lees utilization.
研究开发利用黄酒糟的工艺条件和工艺流程。
The best process conditions were defined by method of perpendicularity designing.
最佳工艺条件确定采用正交设计法。
Effects of composition in solution and process conditions on deposition rate were studied.
研究了镀液组成及操作条件对沉积速率的影响。
The formulation and process conditions of pre-treatment activating solution were presented.
给出了前处理活化液的配方和工艺条件。
The solderability of as-plated Pd coatings produced under different process conditions is good.
镀态下，不同条件下制得的钯镀层具有良好的沾锡能力。
Through optimizing of process conditions, such as temperature, reaction time and stir speed etc.
通过实验对反应温度、反应时间、搅拌速度等工艺条件进行了优化；
The drying process conditions is studied on the Titaium tetrabutaoxide gel by vacuum drying method.
采用真空干燥的方法，探索钛酸丁酯凝胶的干燥工艺条件。
The reaction principles, the process conditions, effect elements and products performance are discussed.
讨论了反应原理、工艺条件的控制、影响因素及产品性能。
The effect of process conditions on selective hydrogenation of diolefins was investigated in the laboratory.
在实验室重点研究了工艺条件对选择性加氢脱双烯过程的影响。
The synthesis process conditions and product quality standards of MD-30 series flotation reagents are presented.
介绍了MD-30系列浮选药剂的合成工艺条件和产品质量标准。
This experiment also has reference value to the control of secondary inclusion in other casting process conditions.
实验研究对于其它铸造工艺条件下二次非金属买物的控制亦有一定的参考价值。
With the improvement on process conditions, high quality conductive infrared radiation materials have been obtained.
经过改进工艺条件，研制出了高性能的红外辐射导电材料。
Better finishing results are achieved by selecting proper catalyst and additives and optimizing the process conditions.
选择适宜的催化剂和添加剂，通过优化工艺条件获得较好的整理效果。
This paper probes into the effects of process conditions on precursor fiber strength, elongation and chemical residual.
本文探讨了工艺条件对粘胶原丝强度、伸长及化学物残留量的影响。
The strength of the wool is not appreciably affected by carbonizing if the process conditions are carefully controlled.
如果碳化工艺做到了准确控制，羊毛的强度不会受到明显的影响。
Under such process conditions, the yield of cholesterol can come to about 74% (based on cholesterol in lanolin alcohol).
在该工艺条件下，羊毛脂醇中胆笛醇的收率可达74%左右。
The process conditions of pretreatment, corrosion prevention coating, decorative coating and film's performance were studied.
研究了镁合金的前处理、防腐涂装以及装饰性涂装工艺条件及其涂膜性能。
A new technology for synthesis of starch xanthate was studied, the optimum process conditions were selected via orthogonal tests.
研究了淀粉基黄原酸盐的合成新工艺，通过正交试验选定了最佳工艺条件。
Two-component polyurethane adhesive for composite membrane was studied in terms of its composition, synthesis and process conditions.
本文确定了复合膜用双组份聚氨酯胶粘剂的组成成份，合成方法和工艺条件。
Through the study on the added amount of NaOH, reaction time and temperature, the optimum production process conditions were determined.
通过对氢氧化钠的加入量、应时间、应温度等生产条件的研究，得出了最佳生产工艺条件。
Through the study on the added amount of NaOH, reaction time and temperature, the optimum production process conditions were determined.
通过对氢氧化钠的加入量、应时间、应温度等生产条件的研究，得出了最佳生产工艺条件。
应用推荐