The drawing below is a cross-sectional view of a radial bearing.
下图是一个径向轴承截面的看法。
This class will be mainly used for withstanding radial bearing load, can withstand certain axial loads.
该类轴承主要用以承受径向负荷,也可承受一定的轴向负荷。
With an additional axial thrust bearing, both the thrust and radial bearings are preloaded individually.
由于增加了一套轴向止推轴承,所有的推力和向心轴承均被分别预加载。
When absorbing load, various loaded points of plain radial bearing receive different compressive stresses.
向心关节轴承在承受载荷时,承载区各点的压应力是不等值的。
Radial bearing seat together with a component, in line with the bearing axis parallel to the surface, there is support for the mounting screws of the bo…
向心轴承与座组合在一起的一种组件,在与轴承轴心线平行的支撑表面上有供安装螺钉的底板。
Radial bearing seat together with a component, in line with the bearing axis parallel to the surface, there is support for the mounting screws of the bott...
向心轴承与座组合在一起的一种组件,在与轴承轴心线平行的支撑表面上有供安装螺钉的底板。
This paper analyzes the reasons for the burning of the front radial bearing of the generator turbine Y1701, presents the solutions for modification and the final effects.
针对Y?701发电汽轮机前径向轴承烧瓦故障,分析前径向轴承烧瓦原因,介绍改进措施及效果。
Radial loading is the amount of weight placed vertically above the axle. Sitting on a trike places an axial load on the bearings. The drawing below is a cross-sectional view of a radial bearing.
径向负荷的重量是多少轴垂直放在上面。三轮车坐在一个地方对轴承的轴向负荷。下图是一个径向轴承截面的看法。
RADIAL FORCE : The load on a bearing perpendicular to the axle, this and the Thrust load are forces that affect the design and application of bearings.
径向力:与轴承的轴线所垂直的载荷;它和轴向力是影响轴承设计和应用的两个力。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,主要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,首要承受径向载荷。
Due to the strong axial and radial load to the bearing of electromotor in counter-rotating axial fan, it is always occurred that the bearing was damaged in use.
由于对旋轴流式风机电动机轴承要承受较大的轴向负荷和径向负荷,实际使用过程中常发生电动机轴承损坏的现象。
These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").
除轴向负荷外,此类轴承还能承受一定的径向负荷(见“当量轴承动负荷”)。
Pump axial force and radial force by the rolling bearing box to bear.
泵的轴向力与径向力分别由轴承盒内的滚动轴承来承受。
The contacting pressure of the stern bearing is influenced with its elastic modulus, radial clearance and thickness.
艉轴承弹性模量、径向间隙、厚度对接触压力分布有明显的影响。
Common causes of bearing failure are shock, vibration, and excessive radial and axial loads.
让轴承失效通常的因素有冲击、振动以及过度的径向和轴向的负载。
To determine the theoretical value and practical value of radial clearance of sliding bearing was introduced with practical example.
通过实例介绍了滑动轴承径向间隙理论值和实际值的确定。
The axial-radial roller bearing is a special slewing bearing design.
这种轴颈向滚子轴承是一种特殊的回转轴承的设计。
The results show that the system stability is directly influenced by the radial clearance of cylindrical roller bearing.
结果表明:圆柱滚子轴承的径向游隙直接影响着滚动轴承-双转子系统的稳定性。
If the actual load is a combined radial and axial load, then an equivalent static bearing load must be calculated.
如实际负荷为径向和轴向复合负荷,则必须计算当量轴承静负荷。
Slewing ring bearings to withstand a large-scale integrated load bearing support, which can bear a greater axial load, radial load and tipping moment.
回转支承轴承是一种能够承受综合负荷的大型支承轴承,可同时承受较大的轴向负荷、径向负荷和倾翻力矩。
Bearing a single row thrust ball bearings to the heart, which has at the same time to bear a greater bearing axial load and radial load capacity.
轴承采用了单列向心推力球轴承,这种轴承具有同时承受较大的轴向荷载和径向荷载的能力。
Deep groove ball bearing is inseparable bearing, mainly it can be subject to radial load and some axial load as well.
深沟球轴承属于不可分离型轴承,主要承受径向载荷,也可承受一定量的轴向载荷。
Input pressure effects on the static and dynamic characteristics of hydrodynamic lubrication radial sliding bearing were investigated theoretically.
研究了供油压力对液体动压径向滑动轴承动静特性的影响。
Considering radial load, axial load, centrifugal force and gyroscopic moment acted on the ball bearing simultaneously, an analysis model based on quasi-dynamic method was set up in this paper.
本文利用拟动力学法,同时考虑径向负荷、轴向负荷、自身离心力以及陀螺力矩作用的影响,建立了高速滚珠轴承载荷分布的分析模型。
If the pulley, sprocket-driven, such as supporting brackets should be established to prevent the initiative gear bearing the radial force.
若用带轮、链轮等驱动时应设托架支承,以防主动齿轮轴承受径向力。
The results show that input pressure is very important in the analysis of the static and dynamic characteristics of hydrodynamic lubrication radial sliding bearing.
结果表明:供油压力是分析液体动压径向滑动轴承动静特性的一个不可忽略的因素。
On the single row angular contact bearings, radial load rating of bearing rings relative to each other purely radial displacement of the load of the radial component.
对单列角接触轴承,径向额定负荷为引起轴承套圈彼此相对纯径向位移的负荷的径向分量。
When radial load is applied, the active bearing can surpress the displacement of the shaft, thus obtaining an infinite stiffness.
当有径向载荷作用时, 自主式轴承能抑制轴颈位移并因此使轴承获得无穷刚度。
If this is not the case, the alignment needle roller bearing must be subjected to an additional radial load.
如果不是这样,必须使对中滚针轴承承受额外的径向载荷。
应用推荐