It offers extremely high resistance to abrasion at the expense of much toughness.
它提供了极高的耐磨性是许多韧性费用。
It features excellent colour retention, resistance to abrasion, impact, seawater and mineral oil.
具有保色性好，耐磨、耐碰撞、耐海水和矿物油等。
Antimicrobial and oil resistance, resistance to abrasion, hydrolysis, non-halogen, flame retardant.
耐油、抗微生物和水解、抗机械磨损，无卤、阻燃。
Through experimental analysis we have obtained a new way to improve the resistance to abrasion concrete.
本文最后通过试验分析得出实现混凝土提高抗冲耐磨性能的一般途径。
It shows that the hardness of laser overlaying advance 2 times, the resistance to abrasion advances 5 times.
分析表明激光堆焊层硬度提高了2倍，耐磨性提高了5倍，耐蚀性能满足应用要求。
Copper applications are limited due to its low tensile strength, poor resistance to abrasion and common acids.
铜的应用是有限的，由于其拉伸强度低，耐磨性差，共同氨基酸。
UHMWPE Sheet has a few very important properties and the first would be its incredible resistance to abrasion.
超高分子量聚乙烯板有几个非常重要的属性，并首先将其令人难以置信的耐磨性。
The evaluation and traditional testing methods of magnetic recording media's resistance to abrasion are discussed.
本文介绍了磁记录介质耐磨性的评价方法和传统的耐磨性测试方法。
Wear resistance test shows that there is an increasing trend of resistance to abrasion with increase of laser energy.
耐磨性试验表明，随着能量的增加，耐磨性有提高的趋势。
It is mainly used as rubber reinforcement and filler, to improve their elongation, tear strength and resistance to abrasion.
主要用作橡胶制品的补强剂和填充剂，能明显改善橡胶制品的抗拉强度、抗撕裂性和耐磨性。
Superior resistance to abrasion but also high chemical affinity to iron which results in being unsuitable for steel machining.
优越的耐磨性，还具有高化学亲和力正在为中铁钢材加工不当的结果。
Hardy cable production PUR polyether every day of the sheath control cable, water resistance, oil resistance, resistance to abrasion, ripstop.
耐寒电缆天天生产PUR聚醚类外护套控制电缆，抗水解，耐油，耐磨，抗撕裂。
It features excellent colour retention, resistance to abrasion, impact, seawater and mineral oil. Also resistance to splashes of aliphatic solvent and vegetable oil.
具有保色性好，耐磨、耐碰撞、耐海水和矿物油等。也耐脂肪族溶剂和植物油的溅污。
The rock resistance to abrasion is one of the key elements which influence the degree of the cutter attrition and it has close relationship with the rock physical mechanics.
岩石的耐磨性是影响刀具磨损程度的关键因素之一，岩石耐磨性与岩石的物理力学指标以及岩石自身性质有着密切的联系。
The results indicted that the better resistance to abrasion for deformed low chromium semi-steel could be obtained by making use of a given suitable heat treatment with residual deformed temperature.
结果表明：该钢变形后经适当的余热热处理可获得较高的耐磨性能。
It provides higher abrasion resistance compared to tungsten carbide at the expense of some toughness.
它提供了更高的耐磨性比钨在硬质合金牺牲一些韧性。
Polyurethane film handily outperforms many other common polymers when it comes to abrasion resistance. Five times more resistant than natural rubber, the material is of choice of wear products.
聚氨酯薄膜的耐磨性胜过许多其他常见的聚合物。较天然橡胶耐磨五倍以上，是耐磨制品的首选材料之一。
Some high chromium steels can be hardened by heat treatment and are used where resistance to wear, abrasion, and corrosion are required.
一些高铬钢能通过热处理硬化，可用于抗磨坏，抗磨损，抗腐蚀需求的地方。
The pure gum rubber sleeve of the Type A Valve offers excellent abrasion resistance, and since the Type A uses only air pressure to operate, there are no moving parts to break or wear out.
型夹管阀采用的纯树脂橡胶具有优异的抗磨损能力，因为A型夹管阀只是采用气压进行操作，因此没有活动部件会断裂或磨损。
However, the term may refer to stiffness or refer to resistance to scratching, abrasion or cutting.
这个之外，这个词还有可能指代刚度或是材料的抗刮伤、抗磨损、抗剪切的能力。
Advantages: good abrasion resistance, anti slip, elasticity, not easy to break, softness, good stability, extended contraction, good hardness, good bending.
优点：耐磨性佳、防滑、有弹性、不易断裂、柔软度较好、伸延性好、收缩稳定、硬度佳、弯曲性好。
This article introduces the erosion and abrasion of hydraulic structures and the affection of toughness epoxy resin resistance to erosion and abrasion of the concrete.
介绍了水工建筑物冲刷磨损破坏情况及增韧改性环氧树脂砂浆在混凝土抗冲磨性能提高中的作用。
New environment-friendly water-based varnish: excluding ketones, volatile organic compounds were very low; durability and good abrasion resistance, surface hardness of up to 2H.
新型环保水性清漆：不含酮，有机挥发物含量极低；耐久性和抗磨损性好，表面硬度可达2H。
Though polyurethane leather with its characteristic advantages of resistance to oil, abrasion, cold, flexion, and good mechanical strength, it has disadvantage of easily ageing.
聚氨酯合成革有耐油、耐磨、耐寒、耐屈曲、机械强度好等优点，但也容易发生老化。
JMD abrasion Guard is extruded of high-density polymer, by a patented process, to ensure maximum abrasion resistance.
由高密度聚合物压制而成，通过特制的工艺程序，以确保最大的磨损性。
A number of tests were carried out to study the behavior of abrasion resistance of the concrete used in the sluice buildings of the Gezhouba Project.
为了解葛洲坝泄水建筑物混凝土抗冲耐磨的性能，我院进行了抗冲磨试验。
Through testing the relative property of the elastic fabric, it is considered to has better creasability, higher strength and better abrasion resistance.
通过对弹力织物的相关性能进行测试，认为该织物具有良好的抗折皱性，且强度高、耐磨性好。
The polyurethane (PU) is a polymer formed with urethane segment, as very high resistance to tear and abrasion, good resistance to ozone, oil and petrol, is widely used.
聚氨酯（PU）是一种具有氨基甲酸酯链段重复结构的聚合物，具有很好的耐撕裂和耐磨损性，良好的抗臭氧和耐油性，应用广泛。
Wear resistance—The chip-tool and chip-work interfaces are exposed to such severe conditions that adhesive and abrasion wear is very common.
耐磨性—切屑-刀具与切屑-工件的接触界面处于如此严酷的状态，粘附和磨损是很普遍的。
Wear resistance—The chip-tool and chip-work interfaces are exposed to such severe conditions that adhesive and abrasion wear is very common.
耐磨性—切屑-刀具与切屑-工件的接触界面处于如此严酷的状态，粘附和磨损是很普遍的。
应用推荐