The paper is dedicated to study the low-cycle fatigue behavior of a certain semi-rigid connection: the top- and -seat angle.
本文尝试研究一种半刚性连接-顶底角钢连接的低周疲劳性能。
Therefore , the paper is dedicated to study a new type joint-top and seat angle with double web angles semi-rigid connection.
为此，本文在参照国内外大量文献资料的基础上，致力于研究一种具有优良抗震性能的新型节点一双腹板、顶底角钢半刚性连接节点。
The rigid connection between steel girders and reinforced concrete piers is one type of the important applications of composite construction.
钢梁与钢筋混凝土桥墩刚节点结合，是组合结构桥梁重要的结构形式之一。
Therefore, the influences of semi-rigid connection on steel frame structure are fully taken into account in the analysis and design of steel frame.
因此，在钢框架的分析和设计时应充分考虑半刚性节点连接的影响。
The rigid connection is installed at the top of the reinforced concrete pier, instead of the intersection part of steel girder and reinforced concrete pier.
将刚节点部设置在钢筋混凝土桥墩的顶部，而非目前常用的将其设置在钢梁与钢筋混凝土桥墩交叉部的结构形式。
The upper end of the side arches (5) has the rigid connection with the side span girders and the lower end has the rigid connection with the main piers (9).
所述边拱(5)上端与边跨主梁刚性连接，下端与主桥墩(9)刚性连接。
The results of analysis indicate that the flange weakening type rigid connection has bigger connection rigid and better behavior of absorbing earthquake energy.
分析结果表明：翼缘削弱型刚性连接具有较大的连接刚度和理想的耗能性能；
In comparison with the condition of rigid connection, the influence of semi-rigid connection to effective length factor of columns has been analyzed quantitatively.
通过与刚性连接情况的比较，定量的分析了半刚性连接对框架柱计算长度的影响。
It is shown that economical designs may be realized with semi-rigid connections by a variation of connection stiffness that balances the span and end moments in a beam.
连接的柔性对无支撑框架的侧移有很大的影响，设计时通过变化连接的刚度以平衡梁的跨中和端弯矩。
Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.
介绍在刚性连接方式下，用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件，给出了该系统的实验结果。
A gymnasium consists of space truss structure and shopping basket shaped truss structure, and the T-type rigid connection joint is adopted when the circular tube is intersected.
某体育馆是由网架结构和落地提篮形桁架组成的杂交结构，圆管相交采用T形相贯刚接节点。
Rigid connection between 6 and CNC high speed drilling center machine spindle system of machine spindle, the rigidity of bearing and gear performance and the spindle and the handle.
cnc高速钻攻中心机器的主轴系统等机器主轴自身的刚性、轴承及齿轮的性能以及主轴和刀柄之间的连接刚性。
The finite element model of the semi-rigid connection between members of frame structures is established in this paper, and it is applied to the model of joint parameters identification.
构造了半刚性结构连接单元，并应用于结构连接参数识别的模型中。
As its special property, such as permission of web buckling behavior and semi-rigid connection, is different from other structural systems, it is necessary to study on its seismic behavior.
由于门式刚架自身的特殊问题，如允许构件腹板局部屈曲和半刚性连接等不同于其他结构的受力特点，因此，急需开展这种结构形式的抗震性能研究。
Rigid beam-to-column connection with T-stub is widely used in the USA and Japan.
形件连接的梁柱刚性节点在美国和日本有着广泛的应用，然而在我国对这方面的研究并不充分。
Because the ideal "rigid joint" and "hinged joint" are inexistent, the stiffness of any connection types is between ideal rigid joint and hinged joint.
因为理想的刚节点和铰接点是不存在的，任何连接形式的刚度都是介于理想刚接和完全铰接之间的。
Because the idealistic "rigid joint" and "hinged joint" are inexistent, the stiffness of any connection types is between idealistic rigid joint and hinged joint.
因为理想的刚节点和铰接点是不存在的，任何连接形式的刚度都是介于理想刚接和完全铰接之间的。
Tensile strength of LDPE resin low voltage differential, rigid poor dimensional stability when processing poor, and connection difficulties, not suitable as a water supply pressure tube material.
LDPE树脂的拉伸强度低，耐压差，刚性差，成型加工时尺寸稳定性差，并且连接困难，不适宜作为给水压力管的材料。
To simulate the human body's articulation, restraints are used to carry on the connection between the rigid body and the rigid body.
刚体与刚体之间分别使用约束进行连接，以此模拟人体的关节联结。
The connection between rules and principles is that of rigid regulations and discretions.
规则与原则的关系就是严格规制与自由裁量的关系。
Through the design optimization, the connection type of arch bases was changed from hinge to rigid and the material utilization was enhanced effectively.
通过设计优化，将大拱柱脚的连接方式由铰接改为刚接，并有效地提高了材料利用率。
The results show that the T-type connection joint can be regarded as rigid under some circumstances but the effects of certain joint flexibility on the structure system should be taken into account.
分析结果表明，在一定几何条件下，T形相贯节点可以看作刚接节点，但应考虑一定的节点柔性对整体结构变形的影响。
The stiffness matrix of semi-rigid steel frames and the fixed end moment are deduced, based on the connection element method incorporating the effects of joint flexibility.
采用连接单元法，考虑连接柔性的影响，推导出半刚性框架梁柱的刚度矩阵及半刚性梁的固端弯矩。
A separate ice growth mode of ice lens is introduced, which is compared with the rigid ice growth mode of ice lens, and the connection between the proposed model and the existing models is expounded.
提出了透镜体的分离冰生长方式，并与刚性冰生长方式进行了对比，阐述了本文模型与已有的各类模型之间的联系。
The research on the loading capability of connection and the establishment of calculational model are the base of understanding semi-rigid joints.
研究连接的受力性能并确定计算模型是研究半刚性节点的基础。
In this paper, we discuss the connection between the rigid graded selfduality over some noncommutative graded ring and the selfduality over its initial subring.
本文讨论非交换分次环上的纲性分次自对偶与其初始子环上的自对偶之间的关系。
The result indicates that the value of structure deformation is influenced by the rigid value of the connection of the semi-rigid frame.
结果表明，半刚性框架节点刚度的大小将直接影响结构的变形大小。
The result indicates that the value of structure deformation is influenced by the rigid value of the connection of the semi-rigid frame.
结果表明，半刚性框架节点刚度的大小将直接影响结构的变形大小。
应用推荐