It has series of products such as Tie rod End, Ball Joint, Rack End, Stabilizer Link, Control Arm and so on.
主要有拉杆球头，球头，拉杆，稳定杆，控制臂等一系列悬挂产品。
These new designs of Rod End and Spherical plain bearing families set the industry's quality and performance standards.
这些新的设计，杆端关节轴承和关节轴承的家庭设置产业的质量和性能标准。
Flow into the cylinder can be directed to either end, producing either a pushing or pulling force at the piston rod end.
可以控制油液流如液压缸的其中一端，在活塞杆上产生一个拉力或产生一个推力。
Clearances for the control rods may be impaired by obstacles in the path of the rods. Spacers on the rod end mountings provide a way of circumventing this problem.
棒间隙的控制杆受损，可通过在路径的障碍。架垫片的杆端提供了一个绕过这个问题的办法。
End face with a gap, no boss butt is refers to the upper and lower casing left a certain gap between the upper and lower main chord rod end face at the same time contact.
端面有间隙、无凸台对接是指在上、下套管之间留有一定间隙，上、下主弦杆端面同时接触对接。
End face with a gap, no boss butt is refers to the upper and lower casing left a certain gap between the upper and lower main chord rod end face at the same time contact.
端面有间隙、带凸台对接外形是指在标准节上部主弦杆上焊有定位凸台，定位凸台伸人另一标准节主弦杆内，上、下套管之间留有一定间隙配合定位。
Who, right is Quanzhou Deyuan bearing industrial Company, a high technology enterprise specialized in making the high quality YC bearings, Thrust bearing, and joint rod end bearings.
他就是专注从事生产高品质外球面带轴承、向心关节轴承以及杆端关节轴承的高新技术企业—泉州市德源轴承实业有限公司。
Make sure that the aluminum ball placed in the rod end can be moved freely. 2 holes were drilled on the plastic spacer in order to house two screws that used to hold the ball linkage.
作出肯定的是，铝球，放置在杆端关节轴承可以提出自由。二洞钻于塑胶间隔，以便向内务两个螺丝用来举行球的联系。
The cause for oil entering inside the cylinder may be due to the rod end damage from which the oil may enter inside the electronics or thrught the cable end side(if damaged or abused).
油进入气缸内的原因可能是由于杆端损坏，油可能从该端损坏进入电子器件内部或者电缆端侧（如果损坏或被滥用）。
Specially manufacture automotive Chassis fittings, Steering parts, Ball joint, Tie rod end, Side rod Assy, Rock and Stabilizer link, Control arm, Idler arm, Pitman arm, Center link cross rod.
专业制造汽车底盘部件和转角及转动部件，产品有：悬挂球头、拉杆球头、控制臂球头、转角拉杆球头、拉杆总成、主邦汰、副邦汰等系列。
Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft end play, or CAM bearings and lifters.
其他可能的原因包括油泵问题，杆和柱轴承之间的空隙，凸轮轴停止工作或者凸轮的方位和升降等。
Computer artwork of the end of a typical ciliated rod-shaped bacterium. Typical rod-shaped bacteria include E.coli and Salmonella.
典型纤毛杆状细的电脑绘图，典型的杆状细菌包括大肠杆菌和沙门氏菌。
In some cases the small end of the rod is clamped to the pin or has a bushing in it to allow the pin and rod oscillation.
在一些情况下，连杆小端夹定在活塞销上或在连杆里有一套管，这样可以使得活塞销与连杆能够共同摆动。
The tie rod at each end of the rack connects to the steering arm on the spindle.
齿条一端连着拉杆，拉杆与车轮轴上的转向摇臂相连接。
The piston may be connected to the upper end of the connecting rod either directly (trunk piston type), or indirectly (crosshead type).
活塞与连杆上端的连接，既可以是直接连接(筒状活塞式)，也可以是间接连接(十字头式)。
In crosshead-type engines, the piston fastens to a vertical piston rod whose lower end is attached to a sliding member called a crosshead, which slides up an down in guides.
在十字头型发动机中，活塞连接在一根垂直的活塞杆上，活塞杆的下端又连接在一个叫做十字头的滑动构件上，十字头在导轨中上下滑动。
The push rod can be supplied free or captive, with female M5 thread, an M5 rod eye, or dome end, captive push rods can be sprung loaded, in either direction, on sensors up to 250 mm of travel.
在推杆可以提供免费或俘虏，其中女性M5螺纹，一个M5的棒眼，或球结束，圈养推杆弹簧加载，可以在两个方向，对传感器多达250毫米的旅行。
Not only did Benjamin Franklin's research herald a new age of electrical understanding, but it also brought an end to a lot of destruction with the invaluable lightning rod.
本杰明·富兰克林的研究不仅宣告了电学时代的开始，而且廉价的避雷针也让雷电肆虐的日子称为了历史。
Based on the matrix optics, the propagation and transformation characteristics of Gaussian beam through a parabolic gradient-index rod with the spherical end surfaces are analyzed.
本文采用矩阵光学的方法，分析了高斯光束经球端面抛物型梯度折射率棒透镜的传播与变换特性。
The connecting rod links its large end to the crankshaft and its small end to the piston.
连杆的大头与曲轴连接，小头与活塞链接。
The connecting rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.
连杆的一端与曲轴的连杆轴颈相连，另一端通过活塞销与活塞相连。
The enlarged end of the lower rod sleeve is formed with at least one through hole facing to the porous piece.
中下杆套筒扩大结束形成至少在面向一块多孔洞之一。
And the reliability of the connecting rod is greatly effected by the serrated contact surfaces at the big end.
对于连杆大端锯齿形配合面的研究更与连杆的可靠性密切相关。
The crankshafts shown in Fig 1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.
在图1-4中，曲轴实际上由以下不同的部分组成，它们分别是：主轴承轴颈、连杆轴颈、曲轴臂、轴承、平衡配量（？）以及飞轮端。
To clean off the moisture on the surface of the copper rod, a blower is fixed at the end of the guiding pipe.
收线导管出口处装有吹水装置，以清除铜杆表面水份。
The knurled knob (GG) at the bottom end of the depth adjustment rod can be used to make minor adjustments.
用深度调节杆底端的滚花柱头可以做细小调整。
The knurled knob (GG) at the bottom end of the depth adjustment rod can be used to make minor adjustments.
用深度调节杆底端的滚花柱头可以做细小调整。
应用推荐