Environmental clean: using screw gear transmission, discard the traditional hydraulic design, working environment, environmental clean.
洁净环保：采用丝杆齿轮传动，抛弃传统液压设计，工作环境洁净环保。
A screw gear type differential mechanism includes a differential carrier, an operculum, a main reducing gear driven gear, left and right half axis gears, etc.
本螺旋齿轮式差速器，包括有差速器壳、壳盖，主减速器从动齿轮，左右各一个半轴齿轮等。
"New" gear, screw - using high quality materials, after high-frequency heat treatment, increase the service life of the machine.
“新型”齿轮、螺杆——选用优质材料，经过高频热处理，增加机器使用寿命。
In addition, the adjustment of the synchronous gear makes the screw does not contact, at the same time the output torque of the half to driven screw.
此外，调整同步齿轮使得螺杆不接触，同时将输出扭矩的一半传给从动螺杆。
The analysis results provide the necessary bases which are benefited for the design and improvement of new screw pump synchronous gear.
计算分析结果为新型螺杆泵同步齿轮的设计和改进提供了必要的依据。
Remove one socket pin head screw (c), three socket head bolts (d) and gear operator cover (e).
拆卸一个灯头钉头螺丝(C)，三个套筒头螺栓(d)和齿轮执行机构盖(E)。
This equation is useful in determining the kinematic linkage between the lathe spindle and the lead screw and enables proper selection of the gear train between them.
这公式在决定车床心轴和丝杆之间的运动学关系时很有用，并且提供了正确挑选它们之间轮系的方法。
With the piston pump, diaphragm and gear pumps is different is that single-screw pump can be used for pharmaceutical filling and measurement.
与柱塞泵、单螺杆泵及齿轮泵不同的是，单螺杆泵可用于药剂填充和计量。
Through analyzing the structure of plastics with inner screw, determined mold structure with gear and rack stripping screw mechanism.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
Gear pump is usually used in conjunction with single or twin screw extruders. In this paper, the gear pump and its applications in extrusion system are introduced.
齿轮泵通常与单螺杆式双螺杆挤出机一起使用。本文主要介绍齿轮泵系统和在挤出加工中的应用。
Analyze the Helical Gear Pump for the instant displacement, single gear displacement, theinstant change ratio and change value of trapping volume and the influnce of screw angle in detail.
详细分析了斜齿齿轮泵的瞬间排量、单齿排量、困油区容积的瞬间变化率及变化量、螺旋角的影响。
Loosening the screw using a commercially available electric screwdriver can cause the shaft bevel gear and threaded disc to move inwards out of the splines rendering the screw ineffective.
用商用电动螺丝刀松开螺钉可能导致轴锥齿轮和螺纹盘向内移出花键，致使螺钉失效。
The compressed air rotates the driver bit (4) together with the drive gear (13) and the screw is screwed into the material to be struck.
通过压缩空气使上述螺丝批头 （4）与驱动齿轮（13）一起旋转，由此上述打入螺钉被打入到被打入 件中。
In addition, the adjustment screw is not synchronized gear makes contact, at the same time pass on half of the output torque driven screw.
此外，调整同步齿轮使得螺杆不接触，同时将输出扭矩的一半传给从动螺杆。
It is supposed to introduce the technology of gear-rack driven mechanism and nut-screw safety mechanism from Germany.
目前，三峡升船机引入德国技术，拟采用齿轮—齿条爬升机构、长螺母柱—短螺杆安全机构。
When the worm crisscross Angle, still need to ensure that's too, and worm gear and worm helical screw to must be identical.
当蜗轮蜗杆的交错角为时，还需保证，而且蜗轮与蜗杆螺旋线旋向必须相同。
Abstract: the system USES a gear reducer, drives the lead screw drive, And nut straight through mobile workbench movement.
摘要：本系统采用一级齿轮减速，带动丝杠传动，通过螺母的直线移动带动工作台运动。
During the cutting of the worm bevel gear, due to the impact interference between the worm and cutter rest slide and screw, the gear teeth shape cutting can not be performed.
蜗杆伞齿轮切齿时，由于蜗杆部分与刀架滑板及刀架螺钉发生碰撞干涉，导致刨齿加工无法顺利进行。
Marine pump (ChuanJian gear pump, ChuanJian screw pump) there are four common faults, the solution is simple.
船用泵 （船检齿轮泵 ， 船检螺杆泵 ）常见故障有四种，解决方法也简单。
The screw pump in many fields has gradually replaced the gear pump and centrifugal pump, the high value.
目前在许多领域螺杆泵已经逐步取代齿轮泵、离心泵等，产生了很高的价值。
Introduced the driving gear box for bi-directional twin screw extruder, the new thrust device can instead of the traditional thrust fit.
介绍了双向双螺杆挤出机用传动箱，新型止推装置可替代传统的止推包。
XYZ all apply imported screw, high precision gear frame and linear guide , ensure the high accuracy .
采用全进口丝杆或高精度齿条出论结构、直线导轨，精度更高。
The thermal balance calculation method for the gear box of a double-screw extruder was developed to accurately calculate the quantity of heat.
为了准确的计算双螺杆挤出机传动箱的发热量，笔者提出一种双螺杆挤出机传动箱的热平衡计算方法。
Based on the principle of dividing with pitch change gear, this paper deduces the formula of arbitrary dividing in screw grinder.
利用螺距挂轮分度的原理，推导出在螺纹磨床任意分度的公式。
Used part of the rotor pump is a simple spur gear drive motor, electric screw fixation using pin.
部分转子泵采用的是简单的直齿轮驱动电机，电机采用地脚螺钉固定。
Positive displacement pump including reciprocating pump, gear pump and screw pump, centrifugal pumps and axial flow pump belong to pump power.
容积式泵包括往复泵、螺杆泵和齿轮泵等，离心泵和轴流泵等则属于动力式泵。
The switch position of butterfly disc is limited by the adjusting screw pole on the worm gear transmission device. The indicating device displays the position of the valve switch.
蝶板的开关位置都由蜗轮传动装置上的调节螺杆限位，指示牌指示阀的开关位置。
And plunger pump, diaphragm pump and the gear pump, screw pump can be used in the pharmaceutical filling and metering.
和柱塞泵，隔膜泵及齿轮泵不同的是，螺杆泵可用于药剂填充和计量。
Single-screw pump is a new volume of the inner rotary gear pump. The main working parts are eccentric screw (rotor) and fixed bushing (stator).
单螺杆泵是一种新型的内啮合回转式容积泵。主要工作部件是偏心螺杆（转子）和固定的衬套（定子）。
Single-screw pump is a new volume of the inner rotary gear pump. The main working parts are eccentric screw (rotor) and fixed bushing (stator).
单螺杆泵是一种新型的内啮合回转式容积泵。主要工作部件是偏心螺杆（转子）和固定的衬套（定子）。
应用推荐