The effects of solvent, surfactant on the process of electrospinning and the morphology of the electrospun nanofibers were studied with scanning electron microscopy(SEM).
利用扫描电子显微镜探讨了不同的溶剂体系和表面活性剂对纺丝过程及纳米纤维形态的影响。
The adherence of 19 SE strains isolated from patients was assayed by three different methods, namely, quantitative adherence assay, scanning electron microscopy (SEM) and light microscopy.
用半定量粘附实验、扫描电子显微镜法和光学显微镜法检测自临床分离到的19株表葡的粘附能力。
Methods: studying growth and aggregation of COM crystals using the scanning electron microscopy (SEM).
方法：利用扫描电子显微镜（SEM）观察COM的生长和聚集。
The constituents and the structures of the diamond films have been identified by means of scanning electron microscopy (SEM), Raman spectroscopy and X-ray diffraction.
利用扫描电子显微镜（SEM ）、显微喇曼光谱、X射线衍射等手段对合成的金刚石薄膜的成分与结构进行了分析。
The worn surfaces of the steel balls were analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS).
用扫描电子显微镜(sem)和X射线光电子能谱仪(XPS)对钢球磨损表面进行了分析。
Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to analyze component and surface morphology of the films.
用俄歇电子能谱(AES)、扫描电镜(sem)和原子力显微镜(afm)对薄膜的组成成分和表面形貌进行了分析。
Morphological microstructure, such as surface, interface and surface of coated fertilizer after nutrient being released in water, was studied by scanning electron microscopy (SEM).
用扫描电子显微镜(SEM)对包膜肥料的表面、界面及养分溶解释放后的表面进行了微观形态结构研究。
Then we detected the physiochemical characteristics of the MS sample through scanning electron microscopy ( SEM ) , infrared spectrum ( IR )and differential thermal analysis ( DTA ) .
通过多种检测手段，如：扫描电镜（SEM）、红外光谱（IR）、示差热分析（DTA）等对制备样本的理化特性进行检测。
Objective:To identify the strain of Paragonimus menglaensis with scanning electron microscopy (SEM) based on the irsurface structures, oral and ventral suckers.
目的是通过扫描电镜（SEM）观察勐腊并殖吸虫成虫体棘、口、腹吸盘，为鉴别其虫种提供资料。
The gas porosity of section plane was characterized with scanning electron microscopy (SEM).
用扫描电镜(SEM)表征了材料剖面气孔的形态结构。
The surface morphology and characteristics of the films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and atomic force microscopy (AFM).
该薄膜的表面形态和特征采用扫描电子显微技术(SEM)，X射线衍射(XRD)以及原子力显微技术(afm)描述。
The structures of RDX/RF aerogel were characterized by atomic force microscopy(AFM), scanning electron microscopy(SEM), X-ray powder diffraction(XRD), and BET method.
用原子力显微镜（AFM），扫描电子显微镜（SEM），X 射线粉末衍射仪（XRD），BET 比表面积分析仪对其结构进行了表征。
The structure, surface morphology and the optical properties were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL).
用X 射线衍射（XRD）、扫描电镜（SEM）、荧光光谱（PL）对样品进行结构、形貌和发光特性的分析。
X ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) are used to analyze the synthesized GaN nanorods.
用X射线衍射（XRD）、扫描电镜（SEM）、高分辨率透射电镜（HRTEM）和光致发光光谱（PL）对生成的产物进行了分析。
The distributions of composition, phase-and microstructure were examined respectively by using electron probe microanalysis (EPMA), X-ray Diffraction (XRD) and scanning electron microscopy (SEM).
分别用电子探针（EPMA）、X衍射（XRD）和扫描电镜（SEM）查证了其组分、相结构和显微结构的梯度分布。
The morphologies and structures obtained the anodized aluminum films were characterized by scanning electron microscopy (SEM). Transmission electron microscopy (TEM) and atom force microscopy (AFM).
并用扫描电子显微镜(sem)、透射电子显微镜(TEM)和原子力显微镜(afm)对阳极氧化铝膜的形貌和结构进行了表征。
The surface profiles, micro-morphologies and crystal quality of SSP ribbon and Poly-Si film were then investigated by the step profiler, XRD (X-ray Diffraction) and SEM (Scanning Electron Microscopy).
借助台阶仪、X射线衍射(XRD)、扫描电镜(sem)等手段对颗粒硅带及多晶硅薄膜进行了表面轮廓、结晶质量和微观形貌的表征。
Atomic absorption spectrometry (AAS), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometry (EDXS) are carried out to characterize the deposition on fiber probe.
通过使用原子吸收光谱仪，扫描显微镜和能量色散X射线谱仪对覆膜光纤探针进行表征。
By means of scanning electron microscopy analysis (SEM), the effects of cosolvent or cosurfactant on morphology of mesoporous silica were investigated.
采用SEM表征手段考察了共溶剂或共表面活性剂对介孔材料颗粒外貌的影响。
Scanning electron microscopy (SEM) was used to further explore the surface ultrastructure of selected ECM scaffolds.
应用扫描电镜进一步探测每种ECM支架的表面超微结构。
Scanning electron microscopy (SEM) was utilized to investigate the morphology characteristics.
用扫描电镜(sem)研究材料的显微结构特征。
The Scanning Electron Microscopy(SEM) indicated also that the compatibility of HBP and PVC are better and in agreement with results of mechanical properties.
扫描电子显微镜（SEM）研究结果证明了HBP和PVC相容性较好，且与测得的力学结果相一致。
Worn surface morphology and element chemistry configuration of steel ball were analyzed by means of X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM).
用扫描电子显微镜和X射线光电子能谱仪观察分析了磨损表面形貌和元素化学形态。
By the scanning electron microscopy (SEM) micrograph and the release experiments, the effect of the characteristic of alginate gel on the release of ovalbumin from alginate beads was investigated.
通过观察冷冻干燥海藻酸凝胶的断面扫描电镜(SEM)照片与卵清蛋白从海藻酸凝胶中的释放试验，分析了海藻酸凝胶性质对蛋白质在凝胶中扩散的影响。
Influence of CO2 partial pressure on corrosion scale of P110 steel in stimulated oil field environments was investigated by using scanning electron microscopy(SEM) and x-ray diffraction(XRD).
利用高温高压釜设备辅以失重法、采用扫描电子显微镜（SEM）和X射线衍射（XRD）技术，研究了在动静两种状态下CO2分压对P110钢腐蚀产物膜的影响。
The obtained samples were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA).
所得样品用扫描电镜(SEM)、傅立叶红外光谱(FT - IR)、X射线衍射(XRD)和热重分析(TG)等分析方法进行了表征。
The surface of the wear scar was analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier infrared spectroscopy (IR).
采用扫描电子显微镜(sem)、X射线光电子能谱仪(XPS)、傅立叶红外光谱仪(IR)对盘上磨痕进行表面分析。
X-ray powder diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and photoluminescence spectra were used to characterize the resulted BAM phosphor.
通过X射线粉末衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）以及荧光光谱对获得的试样进行了表征。
By means of optical microscopy, microhardness testing, X-ray diffractometry (XRD) and scanning electron microscopy (SEM), the oxygen-diffusion zone was characterized in the present paper.
通过金相观察、显微硬度测试、x射线衍射(XRD)及扫描电镜(SEM)分析，研究了渗氧层的结构和性能。
A high speed image scanning system was designed to meet the requirement of fast scanning large images, which was based on scanning electron microscopy (SEM).
为满足快速扫描大面积图形的需要，设计了基于扫描电镜的高速图形检测系统。
应用推荐