Parallel transmission is faster than serial transmission and is widely used for transmission to printers.
并联传送较串联传送快，是传送往印字机的常用方法。参阅串联传送。
Through the example of serial transmission, the technique of high-speed signal source based on PCI bus is discussed.
以串行传输为例，介绍了基于PCI总线的高速信号源设计方法。
A ptactical method for infrared communication is intro duced, which can be used to remote-control set, serial transmission, etc.
介绍一种简单易行的利用红外线进行数据交换的方案，可在遥控装置和串行传输等方面使用。
A test system which can perform the function of multi signals parallel acquisition and serial transmission was designed in this paper.
设计了一个能够进行多个信号并行采集、串行发送的检测系统。
In serial transmission, the communication protocol for communication by both sides, the so-called communication protocol is an agreement the two sides.
在串行传输中，通信双方都按通信协议进行，所谓通信协议是指通信双方的一种约定。
It is proved in practice that for the data acquisition system of protective relaying testing instrument replacing the serial transmission by USB communication is imperative.
实践证明，在继电保护测试仪的数据采集系统中用usb传输取代串口传输是势在必行的。
This paper gives a serial transmission method which bases on the I2C BUS and its division. Wehave effectively solved the data delay in high speed serial data transmission system.
本文提出了一种基于I2C总线及其分割技术的串行传输方法，可有效解决高速串行传输系统中的数据延迟问题。
Serial transmission protocal of 3-wire model with tolerable error ability, the method of transition to save electricity state and time control output realization is also described.
在此基础上，成功地给出了具有容错能力的三线制串行传输协议、省电模式转换方法及时间控制输出的实现方案。
Objective Making use of serial transmission technology and database technology, to connect the laboratory equipment with LIS, thus to realize automated data collection and data management.
目的利用串口技术和数据库技术，将酶标仪等检验仪器与LIS系统连接，实现计算机自动采集检验数据、管理检验数据。
Using single chip as the core, the paper studies a way to realize multiplex low speed data serial transmission, presents hardware connection chart, expounds work principle and software design idea.
以单片机为核心，研究多路低速数据串行传输的一种实现方法，给出硬件连接图，阐述各部分工作原理及软件设计思路。
Serial communication and 100 meters wireless transmission mode.
串口和蓝牙100米无线传输方式；
Serial data communication has gained wide application in network transmission, backplane transceiver and I/O interface.
串行数据通信在网络传输、背板连接和I/O接口等领域应用非常广泛。
In this thesis, I will make a fundamental introduction to serial communications protocol and transmission mode, which will contribute greatly to our development in the future.
在本文中，我们将对串行通信协议和传输方式进行基本的介绍，这对我们的开发将有很大的帮助。
With the serial communication it realizes the semiduplex wireless transmission, adapts to wireless data acquisitions of low power and short distance, and resists disturbance well.
以串行通信方式实现采集数据的半双工无线传输，适合于低功耗短距离无线数据采集，并具有抗干扰能力强等优点；
In high-speed serial links, equalization techniques can effectively improve the data rate or increase the transmission distance.
在高速串行链路中，均衡技术可以有效地提高数据速率或增加传输距离。
This paper introduces the method to realize the serial communication between the virtual instrument and singlechip on the helical transmission test-bed.
介绍了一种在螺纹传动效率测控平台中虚拟仪器与单片机串口通信的实现方法。
Take GC-06 blue tooth receive module, SD storage card and RS232 serial communication connection as data transmission connection.
以GC - 06蓝牙接收模块、SD储存卡和RS232串行通讯接口为数据传输接口的蓝牙接收装置设计。
If transmission line occurs fault, the system is started, then transmits the acquired fault point data to PC by USB serial port in order to process.
当输电线路发生故障时，启动测距系统，将采样得到的故障数据通过US B串行端口上传到PC机，进行数据的浅析浅析处理。
Although available to any mode of transmission, it is currently only implemented via serial port or Ethernet connections.
虽然它能用于任何传输模式，但目前只是通过串行口或以太网联接实现。
This paper introduces an extended serial communication technique using 89C2051. It can provide I/O FIFO of high capacity. Data are pretreated before transmission.
介绍了一种用单片机（89C2051）实现的异步串口扩展技术，这种方法成本低，可以提供大容量的输入输出FIFO，而且对传输的数据有预处理能力。
Abstract: RS-485 serial communication ensure the transmission data quickly, steadily and further, which has been used to the industry control more and more.
摘要：RS- 485串行通信能够保证快速、稳定、远距离地传输数据，已经越来越多地应用于工业控制。
USB (Universal Serial Bus) possesses good characteristics such as fast transmission, high reliability and flexibility. It has been widely used in the PC peripheral devices and potable system.
USB(通用串行总线)具有传输速度快、可靠性高、使用灵活等优点，作为一种通信接口规范，他被广泛地应用在PC外设和便携式系统中。
Compared with usual method adapting the pulse transmission of serial coded mode, it is more reliable and more accurate, the circuit design is simple and easy to be repaired.
其设计思想先进，比通常采用串行编码方式传送脉冲的方法可靠性好、准确度高，且线路简单、容易维护。
Serial communication was used in the data transmission of MCU and MCU, MCU and peripheral hardware.
串行通信用于MCU与MCU以及MCU与外设之间的数据传送。
Data transmission between PC and PC or PC and port to use serial communication and parallel communication two communication modes.
PC与PC或PC与端口之间的数据传输能够使用串行通讯和并行通讯二种通讯方式。
In addition, this system can also be through the serial communication circuit for data transmission over a long distance.
另外，本系统还可通过串行通信电路对数据进行远距离传输。
A new kind of electronic and mechanical antitheft lock using digital code based on the technologies of PIC single-chip microcomputer, serial communication and wireless data transmission is introduced.
本文介绍了基于PIC单片机、串行通信技术和无线数据传输的新型数码防盗电子机械锁的设计。
A new kind of electronic and mechanical antitheft lock using digital code based on the technologies of PIC single-chip microcomputer, serial communication and wireless data transmission is introduced.
本文介绍了基于PIC单片机、串行通信技术和无线数据传输的新型数码防盗电子机械锁的设计。
应用推荐