The assembling of shell plate of ethylene spheres is basically a separate assembling.
乙烯球罐的球壳板的组装基本上采用散装法。
Plate bending by line heating is a main forming method for bi-curve shell plate in shipbuilding.
水火弯板是船舶制造中加工船体双曲度外板的主要方法。
Accurate calculation of spherical shell plate size is very important in the process of mixed type spherical tank's design.
在混合式球形储罐设计的过程中，准确计算球壳板尺寸是十分重要的。
GG5135 X-ray security check equipment and components shell plate can only be a qualified professional and technical personnel to open!
GG 5135型X射线安全检查设备的外壳板和部件只能被有资格的专业技术人员打开！
The surface for shell plate must ensure that clear, good appearance and the subsequent coats must avoid coverage on the previous coats.
外壳必须保证涂层清晰、美观，且后续施工的涂层一定要避免覆盖在前道涂层上；
About the role players to control movement through the plate, needle plate, shell plate, rolling, etc. transitional realize downstairs.
玩家控制角色左右移动，通过平板，针板，弹板，滚板等的过渡实现下楼。
The application of the rotational graded wedge mechanism in a flanging die for the shell plate metal sheets greatly raises the production efficiency.
将双向运动斜楔与旋转斜楔进行了对比，在侧围板外覆盖件翻边模具中采用旋转斜楔成形机构，大大提高了生产效率。
The paper analyzes the corrosion reason of tank's annular plates, and presents a new technique of replacing the corroded annular plates with partial shell plate.
分析了边缘板腐蚀产生的原因及危害，介绍了以牺牲部分罐壁板来更换受腐蚀边缘板的新方法。
It is suitable to inner bottom plate, all decks, platform plate , longitudinal and transverse bulkhead, trunk bulkhead and jointed plate of straight shell plate.
适用于内底板、各层甲板、平台板、纵横舱壁、围壁、及平直的外板的拼板。
The stripe coat must be applied prior to full coat on the erection joints, marker of tanks, water line, draft mark, ship name and port register etc of shell plate.
外壳上的焊缝、舱室标记、水线标记、水尺、船名、港籍名等每一度涂层施工前均要做预涂；
Based on experiment and collection of the spheroid container ball slice to model data, a new method is proposed to the shell plate and descends to anticipate using one calculation method.
通过实验并采集球形容器球瓣片成型数据，总结出了一种较为新颖的球壳板一次下料展开计算方法。
Plate movements are the surface expressions of motions in the mantle—the thick shell of rock that lies between Earth's crust and its metallic core.
板块运动是地幔运动的表面现象。地幔是位于地壳和金属内核之间的一层厚厚的岩石壳。
The new type of all-welded plate & shell heat exchanger combining the advantages of plate, shell & pipe heat exchanger has been applied in industry and shipbuilding.
近年来，集板式、壳管式换热器优点于一体的新一代板壳式换热器在工业、船舶行业有了一定程度的应用。
Its shielded box should be used the main air gap and prevent the primary current to produce the magnetic field concentrating in the shield shell metal plate.
其屏蔽盒应用主气隙，防止原电流产生的磁场集中在屏蔽壳的金属板内。
Composite plate and shell with rubber liners can analogize real filament wound pressure vessels.
配橡胶内衬的复合材料板壳可以模拟真实纤维缠绕压力容器。
When equipment slotted side gap, face plate electrode and groove, perpendicular to the bottom of the shell and necessary.
当设备有槽侧的隔阂时，面临电极板和槽，壳有必要垂直于底部。
Based on the practical effect, the corrosion resistant method using double layer graphite lining and natural hard rubber layer in between steel shell and graphite plate is a successful method.
从实际使用的效果来看，对此类介质采用双层石墨板衬里、钢壳与石墨板之间设置天然硬质橡胶隔离层这一防腐方法是成功的。
This paper introduced the fabrication processes of welded plate heat exchangers sandwich and shell and welding technique which adopted in the course of fabrication.
扼要介绍了全焊接板式换热器的芯体和外壳的制造工艺以及在制造过程中所采用的焊接技术。
Use ceramic materials as the dielectric, silver as electrode, and metal plate as shell.
用陶瓷材料做电介质，金属银做电极，金属极板做外壳。
The characteristics of vibration in a submerged double shell connected by annular plate drived by a point force in inner shell is studied.
对水下由环形肋板连接的有限长双层柱壳在点激励下的稳态振动特性进行了研究。
The shell material used in diversity: Aluminum Alloy, color steel plate, stainless steel plate, galvanized plate etc.
外壳所用材质多样：铝合金、彩钢板、不锈钢板、镀铝锌板等。
This paper introduced the fabrication processes of welded plate heat exchanger's sandwich and shell and welding technique which adopted in the course of fabrication.
简要介绍了全焊接板式换热器的芯体和外壳的制造工艺以及在制造过程中所采用的焊接技术。
A 16 node shell element with relative degrees of freedom was developed for large deformation analysis of plate and shell structures.
为了简便有效地解决板壳结构的大变形问题，针对16节点相对自由度壳单元进行研究。
The combined structures which are made of bar, beam, membrane, plate and shell elements are used broadly in engineering.
杆、梁、膜以及板壳等多单元组合结构被广泛地应用到工程实际当中。
Large vertical cylindrical steel tanks widely used for bulk and fluid storage generally consist of a thin bottom plate, a cylindrical shell, and a fixed or floating roof.
大型立式圆柱形钢储罐由底板、圆柱壳、固定或浮动顶盖组成，广泛用于固体和液体的储存。
The structure and performance characteristics of shell heat exchanger with corrugated plate are introduced.
介绍了波面板壳式换热器的结构和性能特点。
Combined plate and shell foundation is one of the main forms of foundation for high-rise structures.
板、壳组合基础是高耸构筑物基础的主要型式之一。
The folded plate latticed shell is a new type of lattice space structure, having merits of both folded plates and spatial lattice structures.
以某体育馆钢屋盖结构为实例，论述了折板网壳结构的选型、受力特点、水平推力的处理方法和模态分析。
The application and main characteristics of the plate shell heat exchangers were introduced in this article.
介绍板壳式换热器的主要特点和应用。
The application and main characteristics of the plate shell heat exchangers were introduced in this article.
介绍板壳式换热器的主要特点和应用。
应用推荐