The main deck, bottom, and side shell also form a tight envelope to withstand the sea locally.
主甲板，船底和舷侧壳也组成了一个坚固的外壳来抵挡当地的海水。
Pillars shall be supported on the double bottom floors or on the web frames on side shell plates.
柱子应支撑在双层底或舷侧的强结构上。
For bulk carriers, large shear stress always occurs at the top of hopper tank adjoining the side shell.
对散装货船，在底边舱的斜底板和船侧连结处的剪应力也较大。
The side shell provides the webs for the main hull girder and is an important part of the watertight envelope.
舷侧壳为主体船身纵桁提供网装结构，并且是水密外壳的一个重要部分。
When in use, the side shell body of the smelly-odor block body is imbedded into the port of the squatting pan.
使用时将堵臭体上的边壳体嵌在蹲式便池口内。
The cargo was generally tight stowed with no apparent canting or space created between the cargo and side shell frames.
货物基本堆放紧密，没有明显的倾斜，在货物与船侧舷肋骨之间也不存在空隙。
The strength deck, bottom, and side shell of a ship act as a box girder in resisting bending and other loads imposed on the structure.
船舶的强力甲板、船底板和舷侧外板在承受作用在船体结构上的弯曲和其他载荷中起一根箱型梁（船体梁）的作用。
In this paper, the transit temperature field and thermal stresses of hold structures of a single side shell and double bottom vessel were analyzed.
本文研究了单壳双底货船舱段结构瞬态温度场和热应力。
Buckling and plastic collapse of the stiffened panels which is composed of the deck, bottom plating and side shell easily causes the overall failure of a ship hull girder.
甲板、船底板、舷侧板和加强筋所构成的加筋板的屈曲和塑性破坏通常容易导致船体梁的总体失效。
The calculation method for bolt pretightening force of tube side gasket and shell side gasket was proposed.
提出了管侧垫片和壳侧垫片螺栓预紧力的计算方法。
On the flip side, test designers can enjoy the convenience of having ClearQuest test management run from within the same shell as the test scripting tools.
在事情的另一方面，测试设计者能够享受到ClearQuest 测试管理从与测试脚本工具相同的界面中运行所带来的便利。
Cashew poisoning is rare, but those who handle them in order to manufacture them to get the shell off sometimes experience the side-effects.
虽然腰果中毒的案例比较少见，但是给他们去壳生产的工人由于亲密接触，有时候会有副作用的隐患。
When equipment slotted side gap, face plate electrode and groove, perpendicular to the bottom of the shell and necessary.
当设备有槽侧的隔阂时，面临电极板和槽，壳有必要垂直于底部。
Z shell uses all this trickery to provide an RPS1 and RPS2 for right-side prompts on the initial and subsequent lines, respectively.
Zshell使用这种方法提供RPS1和RPS2，它们分别表示初始行和后续行右边的提示符。
Client-side debugging with the GWT shell.
用GWTShell进行客户端调试。
We set the thickness of the shell elements of the welding parts of the steel structure of the car body and its sheathings, such as side wall sheathing, as the sum of their thickness.
通过设置不同部分壳体单元的不同厚度，巧妙地处理了车体钢骨架与车体侧墙板及其他各种板件的焊接关系。
The results showed that compared to conventional smooth segment baffle heat exchanger, the plate heat exchanger(PHE) can effectively strengthen the film heat transfer coefficient of the shell side.
研究结果表明，与传统的光滑管弓形隔板换热器相比，板式换热器能非常有效地强化空气侧的膜传热系数。
The delay heat is transferred to the component cooling water circulating through the shell side of the residual heat exchangers.
热量的移出是靠停冷热交换器壳侧的设冷水来实现的。
The results showed that the total heat transfer coefficient of heat exchanger with hot water arranged in shell-side was relatively higher by 33% than that with hot water arranged in tube-side.
结果表明：在相同的管、壳程流速下热流体在壳程时换热器总传热系数比热流体在管程时相对高出约33%。
The double shell side heat exchanger for use in hydrogenated unit is divided into two kinds of flange type and thread lock ring type.
加氢装置用双壳程换热器分为法兰式和螺纹锁紧环式两种。
Under low packing density, convection is significant in shell-side flow, which is preferable for the reduction of dead zone area and the higher utilization of contacting area.
较低的封装分率下，组件壳程对流作用明显，有利于减少死区，充分利用膜接触面积。
The heating medium will flow through the heater tubing while the fuel gas will fill the shell side of the heater.
加热介质流过加热器管，而燃气则注入加热器壳程。
Modern-day right-handed crabs orient their prey with the shell pointing away from their body and the opening on the right-hand side .
如今右撇子的螃蟹懂得调整猎物---让蜗牛的壳尖远离自己的身体而让蜗壳口对着自己的右边。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构，重点介绍侧抽芯大滑块的设计，顶出机构和进浇方法的改进。
The soaking unit has the configuration of being arranged along the internal side of the shell and a hydropneumatic dual-direction flow field.
所述均热单元具有沿所述外壳内侧设置的构形，且具有液气态的双向流场。
The fan frame is provided with an outer frame, the inner side of the outer frame forms a hollow motor shell in an integrative molding way.
该扇框具有一个外框部，该外框部内侧以一体成型方式形成中空的一个马达壳；
Outer shell includes first and second shell side walls attached to a shell bottom wall and covering first and second open ends of inner sleeve.
外壳包括第一和第二壳壳底部连接到墙上，涵盖内套完第一和第二次公开墙。
After the fabrication of the U type tubular mode heat exchanger core is completed, the shell side hydro-test shall be performed in order to protect the joints of the tube and the tube from leakage.
U型管式换热器芯子制作后应进行壳程水压试验，以确保管接头及管不泄漏。
After the fabrication of the U type tubular mode heat exchanger core is completed, the shell side hydro-test shall be performed in order to protect the joints of the tube and the tube from leakage.
U型管式换热器芯子制作后应进行壳程水压试验，以确保管接头及管不泄漏。
应用推荐