Signal conditioning is becoming more prevalent.
信号调节变得越来越普遍。
MAX1457 is a special sensor signal conditioning chip with high integration.
MAX1457是一种专用传感器信号调理芯片。
Signal conditioning chip is in common used for compensation in recent years.
应用信号调理芯片是现代常用的一种补偿方法。
Figure 10.14. Signal conditioning for different types of transducers and signals.
图10.14。不同类型传感器和信号的信号处理。
This converter is therefore suitable for signal conditioning of a resistive sensor.
该电路特别适合于电阻式传感器的信号处理。
A new method of sensing signal conditioning for small capacitance transducer is introduced.
介绍了小电容量的电容传感器信号调理的一种新方法。
This paper mainly introduces a hardware design of signal conditioning platform based on USB bus technology.
介绍一种基于USB总线技术的信号调理平台的硬件设计方案。
The AD7713 thus performs all signal conditioning and conversion for a single, dual or three-channel system.
因此，AD 7713能处理单通道、双通道或三通道系统所有的信号调节和转换。
You usually need to perform some type of signal conditioning on analog signals that represent physical phenomena.
通常需要对某些表示物理现象的模拟信号进行信号调节。
The IMS modules may be used for analog signal transmission or for temperature detection with signal conditioning.
IMS的模块可用于模拟信号传输或信号调节温度的检测。
The paper introduces firstly the working principle of vortex street flowmeter, secondly the signal conditioning circuit.
本文首先介绍了涡街流量计的工作原理，之后详细说明了前端信号调理模块的硬件结构。
During the hardware circuit design, the signal conditioning circuit and the DAQ card is important to whole system's accuracy.
在硬件电路设计中，信号调理电路和数据采集卡是整个系统测量精度的关键环节。
There is a four-way signal input on the signal acquisition circuit board, which implements signal conditioning and analog-digital conversion.
信号采集板有四路信号输入，完成信号调理以及模数转换功能；
An AD (analog-digital) converter, a signal conditioning circuit and an environment noise sensor can also be arranged so as to monitor directly.
还可设置AD转换器、信号调理电路和环境噪声传感器，以便直接监测。
Fourth chapter mainly elaboratess the signal conditioning circuit of strain gauge and the supply circuit of strain bridge system's design methods.
第四章主要阐述了应变仪信号测量电路及电桥电源电路的设计方法。
The system structure, functions and design principles of a VXI bus based signal conditioning system and signal conditioning module are introduced.
针对汽车悬架测试台的基本结构和受力过程，设计了高精度力传感器和速度传感器输出信号的调理模块。
This common mode biasing can be achieved using the on-chip differential amplifiers, further reducing the external signal conditioning requirements.
此共模偏置可利用片内差分放大器来实现，从而可进一步降低外部信号调理要求。
This process of converting the transducer output into a voltage signal which can be connected to the rest of the system is called signal conditioning.
这种将传感器输出转换成电压信号，并与系统的其它电路相连接的过程，称为信号调理。
Virtual instrument system used for field electrical test generally consists of signal conditioning units (SCU), data acquisition devices and a computer.
用于现场电气试验的虚拟仪器系统，一般由信号调理装置、数据采集卡和计算机组成。
Data acquisition systems usually require anti-superimposing low-pass filter as well as low-pass noise filters in their preceding signal conditioning stages.
数据采集系统通常在前面的信号调节级中需要反叠叠低通滤波器以及低通噪声滤波器。
For example, signal conditioning for audio data from a microphone may involve nothing more than grounding the system properly and perhaps using a lowpass filter.
比如，从麦克风采集的音频信号调节可能涉及以上任何接地系统的正确与否以及是否使用低通滤波器。
The design of hardware includes signal conditioning module and data acquisition module. The design of software includes interface program and upper layer program.
测试系统硬件设计包括对信号调理模块和数据采集模块的设计，软件设计包括接口函数和上层应用程序设计。
The hardware is made up of Data Acquisition card (DAQ) and signal conditioning extension for instrumentation (SCXI) which is composed of Hall voltage current sensor.
系统的硬件平台主要由数据采集卡和霍尔电压电流传感器构成的信号调理器组成。
The system by G-M tube, high-pressured module, signal conditioning circuit, power source module, monolithic integrated circuit and wireless transmission module is composed.
系统由G-M管、高压模块、信号整形电路、电源模块、单片机和无线传输模块等部分组成。
This paper introduces entire focus imaging technology, including the focus and depth theory, fast entire focus lens, fast imaging technique and signal conditioning circuit.
本文介绍全焦距成像技术，介绍焦深理论、快速全焦距透镜、快速成像和处理电路。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
A scheme of signal conditioning platform based on USB bus technology is put forward in the paper after studying the open general-purpose signal-conditioning platform for ATS.
针对开放式通用ATS信号调理平台进行研究，提出了基于USB总线技术的信号调理平台设计方案。
Signal conditioning circuit AD698 for Linear Variable Differential Transformer (LVDT) is introduced, and the application of this circuit can greatly simplify the circuit design.
介绍ad698型线性位移差分变压器(LVDT)专用信号调理电路，应用ad698可简化电路的设计。
As a digital programmable chip of signal conditioning chip, PGA309 is mainly used in resistance bridge pressure sensors, it amplifies and outputs the weak signal from the sensor.
PGA309作为数字化可编程信号调理芯片，主要用于电阻桥式压力传感器，将微弱的传感器桥路信号进行放大输出。
As a digital programmable chip of signal conditioning chip, PGA309 is mainly used in resistance bridge pressure sensors, it amplifies and outputs the weak signal from the sensor.
PGA309作为数字化可编程信号调理芯片，主要用于电阻桥式压力传感器，将微弱的传感器桥路信号进行放大输出。
应用推荐