The quality criterion of non - oriented silicon steel becomes strictly.
无取向硅钢板形质量要求日趋严苛。
Application of Laser Cutting Layout System in Silicon Steel Plate Machining.
激光切割排样系统在硅钢板材加工中的应用。
Roasting roller is an unavoidable part in the production of hot rolled silicon steel.
烫辊是热轧硅钢片生产不可避免的环节。
Such as silicon steel-for, silicon steel market has now formed a highly excessive monopoly.
以硅钢片片为例，如今硅钢片市场已形成了高度过头垄断局面。
It's inevitable for-hot-rolled silicon steel sheets to produce oxidized scale in the process.
热轧硅钢片在生产过程中不可避免地会产生氧化铁皮。
The application of quartz ceramics roll in silicon steel continuous annealing furnace was introduced.
本文介绍了石英陶瓷辊在硅钢连续退火炉中的应用情况。
The cold - rolled silicon steel can be affected by many factors, which are hard to analyze and control.
对冷轧硅钢产品质量造成影响的因素很多，分析繁杂，控制难度大。
The influence of the rolling method on the magnetic properties of thin silicon steel sheets was investigated.
研究了不同轧制方式对硅钢薄带磁性能的影响规律。
The main problems of low carbon low silicon steel during the early time in the medium-thin slab caster in the No.
济钢第三炼钢厂利用中薄板连铸机生产低碳低硅钢的初期，主要存在钢水成分控制和可浇性的问题。
Silicon steel is one of the most potential steel grades that can be produced with twin roll strip casting process.
硅钢是双辊薄带连铸工艺最具开发潜力的钢种之一。
Low carbon steel containing silicon 1-4%, with a high permeability, used in electrical industry silicon steel sheet.
含硅1- 4%的低碳钢，具有极高的导磁率，用于电器工业做矽钢片。
Silicon steel sheet according to their silicon content can be divided into different low silicon and high silicon two.
硅钢片按其含硅量不同可分为低硅和高硅两种。
Its main transformer is made of imported cold rolled silicon steel, So its power loss is little with low no-load current.
该系列点焊机，主变压器均为进口冷轨硅钢片，因此，主变压器功耗小，各型空载电流小。
The magnetizing curve of silicon steel sheets is approximated with two-section line and the saturation degree is defined.
针对电工硅钢片的特点，将磁化曲线简化为两条具有不同斜率的折线。
Silicon steel sheet surface, formation and thickness uniformity, manufacturing core factor to increase the stack installed.
矽钢片表面光滑，平整和厚度均匀，制造铁芯的叠装系数提高。
The research is done in details on M ssbauer spectrum of soft-magnetic material silicon steel tape Z10 treated with laser radiation.
本文对激光辐照的软磁材料—Z10硅钢片进行了细致的穆斯堡尔谱研究。
Hot rolling is the key factor for controlling transverse thickness difference, especially edge drop, of non - oriented silicon steel.
热轧是控制无取向硅钢成品横截面厚差偏大、尤其是边部减薄显著的关键工序。
In this paper, the influencing factor of Continuous Annealing on the surface quality of cold rolled silicon steel strip is introduced.
本文介绍了连续脱碳退火机组对冷轧硅钢板带表面质量的影响因素，提出了连续脱碳退火机组提高冷轧板带质量的措施。
The results show that hot rolling and normalizing annealing processes have significant influence on the cold_rolled texture of silicon steel.
结果表明：热轧及常化退火工艺对硅钢冷轧织构有显著的影响。
Some new kinds of protecting slag for casting of silicon steel are developed by means of computer optimizing technology combined with testing.
采用计算机最优化技术结合实验方法研制了模铸硅钢用保护渣。
The practicable inferior limit of analysis is 0.001%, when ICP-AES with the system is used for analysing trace soluble aluminum in silicon steel.
采用该系统的ICP - AES摄谱法、分析硅钢中微量可溶铝，实际达到的分析下限为0.001%。
Series Y3 asynchronous motors is a new series of general purpose low voltage three-phase cage motors designed with cold-rolled silicon steel sheet.
Y 3系列异步电动机是采用冷轧硅钢片作为导磁材料而设计的一般用途低压三相笼型异步电动机基本系列。
The surface insulation coating of non oriented silicon steel is comprised of the organic coating , mineral coating and mineral filled organic coating.
无取向硅钢表面绝缘涂层分成有机涂层、无机涂层和半无机涂层三大类。
This paper presents a feasible solution of motor core height control based on silicon steel sheet thickness measuring with double eddy current sensors.
本文提出了一种基于电涡流传感器的双探头测量电机硅钢片轧板厚度以控制铁心叠厚的方法。
Sendzimir Mill is the important device in cold rolling silicon steel, which possesses complicated structure and many methods of adjusting for the shape.
森吉米尔轧机是冷轧硅钢的重要设备，其结构复杂且具有多种辊形调整手段。
It is currently used to produce high strength structural steel, spring steel, tool steel, heat treat steel, abrasion steel, silicon steel and stainless steel.
现在它已能生产高强度结构钢、弹簧钢、工具钢、可热处理钢、耐磨钢、硅钢和不锈钢。
The effect of speed ratio on the texture of non-oriented cold rolled low silicon steel sheet was investigated after cross shear rolling at different speed ratios.
选取低硅无取向硅钢常化态板材，分别在不同速比下进行异步轧制，考察了速比对低硅无取向硅钢冷轧织构的影响。
Applied ranges: automotive brakes blocks, silicon steel sheet, motorcycle parts, large areas of chitin workpieces, computer parts, hardware pressing parts and so on.
此款超声波清洗机应用范围：汽车刹车片、硅钢片、摩托车零部件、大面积壳类工件、电脑零部件、五金冲压件等…
The results of laboratory and industrial experiments indicate that have been achieved in the use of the accelerant for the pickling process in the Silicon Steel Sheet Mill.
实验室和工业试验表明，硅钢酸洗工艺使用这种促进剂可收到显著的效果。
The results of laboratory and industrial experiments indicate that have been achieved in the use of the accelerant for the pickling process in the Silicon Steel Sheet Mill.
实验室和工业试验表明，硅钢酸洗工艺使用这种促进剂可收到显著的效果。
应用推荐