Design of the Power Measurement System Base on Single-Chip Microcomputer for EV Storage Batteries.
基于单片机的EV动力蓄电池组电量计量系统的设计。
A multi-level menu modularization programming method based on single-chip microcomputer system is introduced.
介绍了一种基于单片机系统的多级菜单模块化编程方法。
This paper introduces the process of improvement for China-made mechanical looms by the Single-chip microcomputer.
本文介绍了采用单片机对纯机械式结构的国产织机进行改进的过程。
Processor, the whole system adopts single-chip microcomputer AT89C2051 is under control work in the system software.
处理器采用单片机AT89C2051，整个系统是在系统软件控制下工作的。
This paper introduces interruption system software structure and operation of 32 Bit 80960KB Single-chip microcomputer.
本文主要介绍32位单片机80960KB中断系统的软件结构及其运行机理。
The general drilling depth system is composed of a single-chip microcomputer, a personal computer, hardware and software.
用单片机和微机共同构成的通用钻井深度系统由硬件和软件组成。
This paper presents a data collection system based on high performance sensors and a low power single-chip microcomputer.
本文的数据采集系统以高性能的传感器和低耗电单片计算机为基础。
The design of single-chip microcomputer controlled by the automatic feeding system with hopper dryer feed supporting system.
本设计的由单片机控制的自动加料系统是与料斗式干燥机配套的加料系统。
A Marine engine room detection system is designed with speech synthesis chip and single-chip microcomputer as main hardware.
本文以语音合成芯片和单片机为主要硬件，设计了一种船舶机舱检测系统。
This paper introduces M38C3, a new type single-chip microcomputer, and a Multi-function A. C. electricity meter applies M38C3.
本文介绍了一种新型的单片机m 38c3和应用m 38c3单片机构成的多功能交流电量测试仪。
A kind of high performance multi-computer serial communication scheme for distributed single-chip microcomputer control systems is proposed.
本文提出一种在分布式单片机控制系统中，多机间进行高性能串行通讯的方案。
In software part, the grating signal is subdivided by the ADC of single-chip microcomputer in order to achieve the system qualification expected.
在软件设计中，利用单片机内部集成的ADC完成信号的数字细分，从而达到很高的细分精度。
This paper describes a single-chip microcomputer-based inspection and diagnosis system for analysing the faults of gasoline engine ignition device.
介绍一种利用单片机检测、诊断汽油机点火系故障的分析系统。
This paper introduces a useful method to realize asynchronous acquisition of multi-channel signals on AT87C51 single-chip microcomputer using software timers.
本文介绍了一种利用软件定时器在AT87C51单片机上实现多路信号异步采集的实用技术。
The composition, structure and realization of a real time illuminance monitoring system with a single-chip microcomputer. computer as its main component are presented.
本文介绍了一个以单片微型计算机为核心的光照度实时监测系统的组成、结构及具体实施措施。
This article introduces reactive power detection and compensation device based on single-chip microcomputer AT89S51. The working principles of the device are also introduced in detail.
介绍了基于AT 89s51单片机控制的无功检测与自动补偿装置，分析其工作原理。
A new infrared digital guiding method is used. AGV's motion guiding and controlling simulation in free path are completed by using single chip microcomputer.
利用红外数字导引新方法，使用单片微型计算机，对自由路径AGV的导引和运动控制进行了模拟仿真。
It has virtue of strong function, supernal efficiency and shortens development time of single - chip microcomputer system.
它具有功能强，效率高的优点，并且缩短了单片机系统开发所需时间。
This paper mainly introduces interface circuit design of 8259a and 32 bit single chip microcomputer, provides a method for extension of 80960kb interrupt system.
本文主要介绍8259a与32位单片机80960KB的接口电路设计，为该单片机中断系统的扩展提供一种方法。
STC single chip microcomputer is applied here to judge and control the working or standby mode.
本课题利用STC单片机来判断并控制家用电器的工作或待机模式。
The structure and the principle of auto board shears have been introduced with the design method of hardware and software implemented by 8051 single chip microcomputer.
介绍了自动剪板机系统的结构组成和工作原理，叙述了8051单片微机实现其生产过程控制的硬件与软件的设计方法。
This paper introduces a computer system of temperature control device by using a single chip microcomputer as an intelligent unit .
本文介绍一种以单片机作为智能单元的计算机温度控制装置。
This paper statement a digital multimeter using type of 8031 single chip microcomputer.
本文介绍了采用8031单片微机设计的数字显示仪表。
The paper presents the work cycle and velocity election of a vertical broacher controled with single chip microcomputer 8031.
本文介绍了用8031单片机控制立式拉床的工作循环和速度选择等。
Programmable logic controller is short for PLC. It is a special purpose industry control machine, that kernel is single chip microcomputer.
可编程逻辑控制器简称为PLC，它是以单片机为核心的工业控制专用机。
This paper describes the interface method to the dot array liquid crystal display and 8031 single chip microcomputer, the program chart is given.
讨论了点阵式液晶显示器与8031单片机的接口方法，给出了程序流程图。
This paper describes the interface method to the dot array liquid crystal display and 8031 single chip microcomputer, the program chart is given.
讨论了点阵式液晶显示器与8031单片机的接口方法，给出了程序流程图。
应用推荐