Vibratory conditioning technology (VCT) was used in the routine electro-slag welding (ESW) for the first time.
首次将振动调制工艺应用到常规电渣焊中。
The welding of high pressure boiler longitudinal weld shall be electric slag welding which may be replaced by improved auto-submerged arc welding when have no electric slag welding.
高压锅炉锅筒纵缝焊接时，采用的焊接设备为电渣焊。在不具备电渣焊的情况下用改进的埋弧自动焊成功的替代了电渣焊。
The weld defects of incomplete fusion and burn through always occur when the electro-slag welding is used between the outside thin metal plate and the inner clapboard in a box-section member.
箱形截面构件薄壁板与内隔板电渣焊接时，易产生壁板烧穿和焊缝未熔合现象。
Application of stainless steel after welding (not by steel) flat shovel thoroughly clean slag and spatter.
焊后应用不锈钢(不得采用碳钢)扁铲彻底清理熔渣和飞溅。
Good shear performance. Suitable for fibrous media, such as welding slag and other hardness particles.
剪切性能好。适用纤维状介质，和诸如焊渣等硬度颗粒。
" bridge brand " marble mostly to use in slagging powder with drug cover welding electrode. improve slag basicity, steady arc, increase surface strain. it also used on architecture industry.
粤桥牌大理石粉为白色或浅灰色矿粉，主要用于药皮焊条等焊接材料的造渣造气剂，可提高熔渣堿度稳。
And presents two overlay welding processes using strip to obtain a clad material: submerged arc strip cladding (SAC) and electric slag strip cladding (ESC).
而且也给出了获得堆焊材料的两种带极堆焊工艺：一种是埋弧带极堆焊(SAC)；另一种是电渣带极堆焊工艺(ESC)。
Suitable for fibrous media, such as welding slag and other hardness particles.
适用纤维状介质，和诸如焊渣等硬度颗粒。
Before installation on the suction and discharge line to clean, remove rust and dirt, especially welding pipe welding slag must be thoroughly cleared, to avoid killed after entering the pump.
安装前对吸入、排出管路要清理干净，去掉铁锈等脏物，特别是焊接管路的焊渣必须彻底清除，以免进入泵后咬死。
Manual welding, manual welding, neat poor, easy to produce porosity slag.
手工组焊，手工作业，焊接工整性欠佳，易产生气孔夹渣。
Solar photovoltaic welding tin-plate machine after manyimprovements, overcome the tin slag in the process of production, not shinysurface, uneven coating, defects such as copper.
太阳能光伏焊带涂锡机经过多次的改良，克服了生产过程中锡渣多，表面不光亮，镀层不均匀，露铜等缺陷。
High production efficiency, outstanding welding quality without obvious welding slag.
生产效率高，焊接质量好，无明显焊渣。
Company rely on our own strong research and development, successfully developed the world's first welding slag ladle.
公司依靠自身雄厚的研发实力，成功研制了世界首台焊接结构渣罐。
The positioning welding stainless steel pipe shall be smooth transition arc and weld end, can not be too high, must ensure good fusion, produce unweld, slag and other defects in case.
不锈钢管件的定位焊起弧和结尾处应圆滑过渡，焊道不能太高，必须保证熔合良好，以防产生未焊透、夹渣等缺陷。
It can be considered the equipment ideal for electro-slag pressure welding of vertical reinforced bar.
认为是竖向钢筋电渣压力焊的理想设备。
The machine is used for cleaning welding slag after welding profiles.
本机用于塑料型材焊接后的焊瘤的清理。
It can not only accomplish the work of ordinary cleaning machine but also clean welding slag in profiles.
本机不仅能够完成普通角缝清理机的工作，而且能够清理型材内部的焊瘤。
Based on the analysis of site welding, the main welding defects are lack penetration, lack fusion, slag inclusion and porosity.
从现场施工情况分析，焊接的内部缺陷主要有未焊透、未熔合、夹渣和气孔等几种。
By using this process to repair castings, there is no obvious separating line, no slag inclusion and gas hole between the welding zone and base metal.
用此工艺焊补铸件，焊补区域与基体间没有明显的熔合线，无渣孔、气孔等缺陷。
Work in high efficiency with good welding quality. No slag, opened arc and high visibility;
生产率高，质量好，无渣，明弧，能见度高；
Work in high efficiency with good welding quality. No slag, opened arc and high visibility;
生产率高，质量好，无渣，明弧，能见度高；
应用推荐