Slip-line round is a kind of lifting accessories.
滑线轮是起重配件的一种。
Bycomparing theoretical contour patterns with experimental ones, the slip-line-field solution can be examined.
将理论与实验的等值线图作比较，可从速度场方面检验滑移线场解。
It is explained in this paper what the velocity component contours in slip-line-field are and how to draw them.
本文论述了滑移线场中理论速度分量等值线的概念及作法。
A cutting model is constructed by slip-line field theory, in which the influences of cutting edge roundnesses are considered.
通过采用滑移线场理论，建立了一种正交切削模型，使用这一模型，从理论上预测了切屑卷曲半径。
By constructing a metal cutting model using slip-line field theory, chip curling radii are predicted theoretically in orthogonal cutting processes.
通过采用滑移线场理论，建立了一种正交切削模型，使用这一模型，从理论上预测了切屑卷曲半径。
The thinning drawing force is calculated through deforming work method and slip-line method irrespectively, and the results are compared in this paper.
本文用变形功法和滑移线法分别求解变薄拉深力，并将两种方法的计算结果进行了比较。
The theory of slip-line field is an effective method for problems of plane strain of perfect plastic solids, and the circle-fan field is used frequently.
滑移线理论是解刚塑性平面应变间题的一种有效方法，而圆扇形场则是常使用的。
It's deduced that besides the three deformation zones, other two deformation zones must exist according to the kinematical admissibilities of the constructed slip-line field.
根据滑移线场运动学可容条件的要求，推论出在第一变形区与第二变形区之间及第一变形区与第三变形区之间存在着另外两个变形区。
Based on the limit equilibrium theory for axially symmetric condition, the active earth pressure of circular pit obtained with slip-line method was extended to non-uniform surcharge loading.
基于轴对称情况下土体的极限平衡理论，将圆形基坑主动土压力的滑移线解推广到非均匀堆载情况。
The generalized slip-line theory is advanced, which develops the classical slip-line theory and can be used to solve all two-dimensional problems and axisymmetric plastic deformation problems.
提出了广义滑移线法，将经典滑移线理论拓展到能求解所有二维问题和轴对称塑性变形问题；
I don't think we will slip into a real recession but if the pace of growth declines, the top line and the bottom line for the investment Banks will decline.
我认为我们不会滑入一场真正的衰退，但如果增速放慢，投行的收入和收益都将下降。
The slip last basically looks like the upper is wrapped all the way around the foot and there is one line of stitching down the middle of the shoe under the insole.
这种鞋楦一般来说鞋面包裹着整个脚，在鞋底中部有一条缝合线。
Under all circumstances, visual inspection of the drilling line must take precedence over the predetermined slip and cut procedure.
在任何情况下，在预定滑大绳或倒大绳之前，都要先对大绳进行直观检查。
The paper analyzes the limited load of wedge by unified strength theory, finds its solution in slip line and discusses its application in geotechnical engineering.
采用统一强度理论对楔体进行了极限分析，得到了极限荷载的滑移线解，并讨论了其在岩土工程中的应用。
The basic theoretical methods such as Slab method, UBET, Slip Line method, FEM, and FVM have been used in the research of metal plastic forming technology.
研究金属塑性成形规律的理论方法现在有主应力法、上限法、滑移线法、有限元法和有限体积法。
The unit pressure in backward extruding hollow billet has been calculated by the slip line method and the upper bound method.
本文对空心件反挤的单位挤压力，采用滑移线法和上限法进行了计算。
It proves theoretically that the slip line family is just the slip surface family meeting the yield criteria.
在理论上证明，滑移线族就是满足屈服准则的滑动面族。
Furthermore, from the analytical results indicate that the shear band mode of discontinuous bifurcation is essentially identical with slip line in the plane strain condition.
进一步分析表明，对于平面应变情形，剪切带同滑移线本质上是一致的。
From the stereographic plots of the slip line directions measured around the specimen surface, the slip planes were determined.
根据试样表面滑移线的方向，在极图上确定滑移面。
The global safety factors were calculated by the stress integration along a slip line and a concept of "small slip failure" was introduced in stability of the embankment slope.
通过在边坡滑弧上进行线积分，得出边坡在不同时刻的整体安全系数，进而提出了路堤边坡降雨作用下“小弧滑动”的概念。
Slip line is a kind of surface defect which occurs in the forming of automobile panel and affects surface quality of automobile panel and appearance of body.
滑移线是汽车覆盖件冲压生产中经常出现的一种表面缺陷，它严重影响了覆盖件的表面质量和车身的外观。
The application of the characteristics is explained in an example of constructing a slip line field.
以一个滑移线场构造为例，说明了某些性质的应用。
On the basis of above experiment, fracture mechanism of X60 over-heated HAZ was given using the theory of slip line field.
在上述实验结果的基础上，采用塑性滑移线场理论，提出了X60过热区在不同服役温度下的断裂机理。
Slip line and if the use of spare parts of the site does not meet, neither spare TaiFen and heat exchange equipment, cannot stop again, should be the scene of the concise and disposal.
滑线若是运用现场没有满足的备件，而换热设备既无备用台份，又不能停机时，应进行现场的简洁处置。
The deforming force of cone-die direct extrusion is solved by a mathematic method based on the simplified flow model of slip line field.
基于滑移线场的简化流动模型，运用数学方法求解出了一种锥形模正挤压变形力的最佳上限解，并将该上限解用通用解析式表达出来。
By simultaneously sampling roll-bar speed and estimating tension by electric current-torque method the forward slip model for continuous shape rolling can be identified on-line.
在正常连轧生产条件下，同时在线采集轧辊与轧件速度并采用电流—力矩法估计机架问张力值，可以在线地识别前滑模型。
The reason causing oscillatory was analyzed by applying concerned slip line field theory.
同时应用滑移线有关理论知识对其摆动的原因进行了分析。
The reason causing oscillatory was analyzed by applying concerned slip line field theory.
同时应用滑移线有关理论知识对其摆动的原因进行了分析。
应用推荐