A new software and hardware design scheme for remote monitoring of navigation light buoys is presented in this paper.
介绍新近研发的海上导航浮标（以下简称航标）信息的远程监测系统的软硬件设计整体方案。
In the left paper, essential technology of software and hardware design scheme, systematic simulation is expounded, the DSP and FPGA is selected as the core of system hardware platform.
论文后半部分详述了该定位系统样机在实现过程中的软、硬件设计方案及系统级试验的关键技术。
A design scheme of high - performance data acquisition based on USB and FPGA and its hardware and software implementation are introduced.
提出了一种基于usb和FPGA的高性能数据采集设计方案并详细介绍了其软硬件实现方法。
This paper introduces the principle, scheme of signal extraction, design of the software and hardware about the on-line monitoring device of the leakage current.
介绍了泄漏电流在线监测装置的原理、信号抽取方案和软硬件设计。
At the present This thesis has the system's scheme of hardware main circuit diagram and software design.
在本次论文中，给出了控制系统的主电路图及软件设计。
The testing result shows that the system scheme is integral, the hardware design and software programming are right and the design requirements are satisfied.
测试结果表明，系统方案完整，硬件设计和软件编写正确，达到了设计目标。
This paper Makes a deep research in the software and hardware realization of fault location system with radial feeders, stressing on the design of the hardware system and software programming scheme.
本文对基于“递进信息法”的配电网馈线故障定位系统的硬、软件实现进行了较深入的研究，重点设计了硬件系统和软件编程方案。
The technology of constitute scheme, modularize design flow, simulate and emulate, logic synthesis, cooperate with software and hardware has been researched and mastered from the point of application.
对设计方案的制订、模块化设计流程、模拟仿真、逻辑综合、软硬件协同设计等技术从应用的角度进行了分析研究和掌握。
Analyzes the design scheme, hardware and software of central monitoring system for multi low temperature cold storages.
分析多间低温冷库温度集中监测系统的设计方案、硬件系统和软件系统。
This paper introduces the design characteristic of hardware, software and the scheme of data collection and record in its electrical control system.
本文介绍其电气控制系统中计算机数据采集与记录的方案及软硬件设计特点。
In this paper, we introduced the control theory of brushless DC motor, and proposed the design scheme, software method and hardware electric circuit for whole system.
介绍了无刷直流电动机的控制原理，给出了系统设计的整体方案，并详述了硬件电路和软件程序设计。
The structure of the control, the control scheme, flowchart and the design of hardware and software are analyzed concretely.
在设计中具体分析了掺混控制系统的结构，控制方式，工艺流程图和软硬件设计。
PLC control scheme of cation exchanger, which has application in the desalted water process, is presented in this paper. The design of software and hardware is also described.
从工程角度介绍可编程控制器(PLC)用于脱盐水处理中阳离子交换器的控制方案，并给出了有关硬件及软件的设计要点。
The whole scheme of the hardware design and software flow is expatiated, and introduced the system form of every module and the structural characteristic.
详细阐述了整个硬件设计方案以及软件流程，具体介绍了各功能模块的系统组成和结构特点。
Through applying reliability technology, completed the hardware & software scheme of match board control system and the design of part of interface and protection circuitry.
应用可靠性技术，完成了匹配台控制系统硬件软件总体设计、部分接口与保护电路设计。
This paper researches on theory and scheme of variable rata sprayer controller based on AT89C52, the design of hardware and software are given emphasis to explain.
文章主要研究了AT 89 C 52单片机实现变量喷雾的工作原理和实现方案，重点阐述了该系统的硬件设计和软件编程。
This paper describes a design scheme of the hardware and software, with which the microcomputer controls electronic display consisting of LED point lattice.
本文介绍由发光二极管组成的点阵作电子显示屏，并由微型计算机进行控制的硬件和软件设计方案。
Based on the combustion process in alkali recovery system, the control scheme, hardware configuration and software design of the black liquor combustion process are introduced.
结合碱回收燃烧工段的工艺流程，介绍了黑液燃烧过程的控制方案、硬件配置和软件实现。
According to the complicated environment of the system working site, have proposed having hardware implementing scheme of stronger anti-interference ability and software design.
根据系统工作现场的复杂环境，提出了具有较强抗干扰能力的硬件实施方案和软件设计。
The system USES TMS320LF2407 as major control chip, introduces system main scheme design, hardware design, software design, and gives detail experimental procedure and analysis of experimental data.
文章提出采用TMS320 LF 2407为主控芯片，介绍了系统总体方案设计、硬件设计、软件设计、并给出了详细的实验步骤和实验数据分析。
A design scheme of radar interface based on USB technology is presented. Techniques of hardware circuit design, firmware programming and application software design are illustrated.
提出一种基于usb的雷达接口电路设计方案，给出硬件电路设计、固件编程、应用软件设计等关键技术的解决方法。
Overall design scheme, the composition of control system, hardware construction and software control flow are given in detail., design philosophy of hardware and software is established.
详细介绍了总体设计方案、控制系统的组成、硬件结构及软件控制流程，确立了硬件、软件的设计原则。
This paper introduced the design method of the ground anti-cookoff device of air machine gun, offering detailed hardware composings and software design scheme.
介绍了航炮地面防走火装置的设计方法，并给出了较为详细的硬件组成及软件设计方案。
This paper presents bushless DC motor servocontrol system based on DSP, then makes a brief about control strategy and design scheme of software and hardware that realizes this control system.
介绍了一种基于DSP的无刷直流电机伺服控制系统，简述了实现该控制系统的软件和硬件设计方案及控制策略。
The paper gives the design scheme of the intelligent electronic controller of the automobile engine based on CANBUS, including the control structure of hardware and control algorithm of software.
给出了基于CANBUS的汽车发动机智能电子控制器的设计方案，包括系统硬件控制结构和软件控制算法。
The paper provides a scheme to control AC servo-motor using single chip-computer AT89C51, including hardware design and software design.
介绍了一种由at89c 51单片机控制交流伺服电机的系统方案，包括系统硬件设计和软件设计。
This paper introduces the main function of the instrument of rotational speed measure and alarm, the working scheme of the system, hardware design and software design.
本文介绍了回转机械转速测量报警仪的主要功能，系统的工作原理，硬件设计和软件设计。
Combined with the design scheme of hardware and software, some advantages such as the reliability and rapidity of system are analyzed.
并结合系统的软件和硬件设计方案，论述了其可靠性、快速性等问题。
This paper introduces the concrete application in the three -phase multi-functional ammeter of ADE7758 mainly. Include the software and hardware design of ADE7758 and computer calibration scheme.
本文主要介绍ADE7758在三相多功能电表中的具体应用，包括ADE7758的软硬件设计和计算机校表方案。
The parameter testing system for the flash welding is introduced, including the technique scheme, the hardware composition and the function design of the software.
介绍了锚链闪光焊参数测试系统的技术方案、硬件组成、软件功能设计。
应用推荐