By using ANSYS as the software of finite element analysis, a model is set up for calculating finite element of pile foundation with lateral load.
运用ANSYS有限元分析软件，建立桩基在侧向荷载作用下的有限元计算模型。
On this basis, as the permeability of permanent magnetism material is non-linear, two gear wheel's magnetic field is simulated with finite element software, and analysis of the result is carried on.
在此基础上采用有限元分析软件对永磁材料的磁导率为非线性时的一对永磁齿轮传动磁场进行了仿真分析，并对结果进行了分析总结。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
According to the basic structure and operating principle of wedge backstop, analyzes the wedge for mechanics and gives the finite element analysis by ANSYS software.
根据接触式楔块逆止器的基本结构及工作原理，对楔块进行力学分析，并利用ANSYS软件进行有限元分析。
Through the visualization software VB connecting and invoking the ANSYS, they realize the finite element strength analysis of the bus frame.
通过可视化软件VB与ANSYS连接和调用，实现客车骨架强度的有限元分析的可视化。
The temperature distribution and stress distribution of blast furnace tuyere with gradient coating have been studied using finite element analysis software, comparing with uniform coating.
采用有限元分析软件研究了梯度涂层高炉风口的温度分布和应力分布，并与均匀涂层进行了比较。
This paper focuses on the use of finite element analysis software, the threshing cylinder axis static finite element analysis process.
为此，着重研究了利用有限元分析软件对脱粒滚筒轴进行有限元静力分析的过程。
Finite element simulation for upsetting and performing steps has been done by finite software DEFORM on the basis of theoretical analysis for upsetting steps of wheel.
在对车轮镦粗工步进行理论分析的基础上采用有限元软件DEFORM对镦粗及预成形工步进行了有限元模拟。
The author applied ANSYS finite-element standard calculation software through the strength analysis, which assured the reliability of the analysis.
在整个强度分析中，作者应用了ANSYS有限元标准计算软件，保证了分析的可靠性。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
This paper adopting finite element analysis software ANSYS to analyze the buckling property of slant-legged rigid-frame bridge in cantilever construction stage and service phase.
结合工程实例，采用ANSYS有限元分析软件对某斜腿刚构桥在悬臂施工及运营阶段的屈曲特性进行分析。
Moreover, based on the method of finite element analysis and the general software, the failure behavior of high density syntactic foams is investigated.
还利用计算机和通用软件对高密度复合泡沫塑料进行了有限元分析，研究了高密度复合泡沫塑料的失效行为。
By use of finite element analysis software ANSYS, the steady-state temperature field and thermal stress field in the tubesheet of a large fixed tubesheet heat exchanger were analyzed.
采用有限元分析软件ANSYS，对某大型固定管板式换热器管板的稳态温度场和热应力场进行了三维有限元分析。
Based on the force behavior of joist of large-span prestressed space frame system, space finite element analysis of prestressed beam-slab system is carried out by using ANSYS software.
针对大跨度预应力空间框架体系托梁受力复杂的特点，采用ANSYS软件进行了预应力梁板体系的空间有限元分析。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
Make use of table analysis, modal analysis of ANSYS finite element software motive force to analyze shake stress analysis of the arch dam.
利用ANSYS有限元软件动力分析中的谱分析、模态分析功能，对拱坝进行地震动应力分析。
The prediction model of temperature field in the process of wearing water-cooled of angle steel was set up using ANSYS finite element analysis software.
针对角钢穿水冷却过程，借助ANSYS有限元分析软件，建立角钢穿水冷却过程温度场的预报模型；
This work expands the application range of ABAQUS in elastoplastic finite element analysis, and set an example for developing other functions of ABAQUS and finite element software.
论文所完成的工作扩大了ABAQUS在弹塑性有限元分析中的应用范围，并为ABAQUS其他功能的开发以及有限元程序的开发提供了借鉴。
The paper uses finite element analysis software ANSYS, simulating and analysing the experimental process of Carbon Fiber Reinforce Plastic strengthen brick masonry wall.
采用有限元分析软件ANSYS，对碳纤维布加固砖砌体墙的试验过程进行了模拟分析。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
General purpose analysis software is applied to establish and calculate a model of integrated finite element model for whole bridge.
通过运用大型有限元结构分析软件，建立全桥组合有限单元模型对全桥结构进行计算分析。
The finite element analysis software, which was based on the general finite element software package, was developed for numerical simulation of the entire composite cure process.
以通用有限元软件包为基础，开发了能够模拟复合材料整个制造过程中复杂物理化学变化的软件。
The finite element analysis software, which was based on the general finite element software package, was developed for numerical simulation of the entire composite cure process.
以通用有限元软件包为基础，开发了能够模拟复合材料整个制造过程中复杂物理化学变化的软件。
应用推荐