The solid fuel consumption of sinter has been decreased greatly through insisting on using high-quality calces.
通过坚持使用高质量的生石灰，大大降低了烧结矿的固体燃料消耗。
Explosion power of solid fuel mixture can be enhanced with a suitable increase of bomb density.
适当增加弹体密度可增强这种固态燃料混合物的爆炸威力。
The neural network is adopted to study the burning rate identification of the solid fuel ramjet.
用神经网络技术对固体燃料冲压动机的燃速辨识问题进行了研究。
The influence of carbon on the process of firing hematite pellet containing solid fuel is investigated.
研究了碳对内配固体燃料赤铁矿球团焙烧过程的影响。
Working at the same temperature as a normal gasifier, using CO2 means a better conversion of solid fuel into syngas.
在与正常气化炉同样的工作温度下，使用二氧化碳能提高固体燃料至合成气的转化率。
Replacing 30% of the steam atmosphere of a gasifier with CO2 ensured that all the solid fuel was turned into syngas.
将气化炉内30%的蒸汽气体替换成二氧化碳，就能确保所有的固体燃料转化成合成气。
The CO2, as it's converting a solid fuel to a gas, also has the ability to react with the carbon char that is forming.
在将固体燃料转换为合成气时，二氧化碳也会与正在形成的焦炭反应。
Here fundamental research, including suppression on the combustion of gas, liquid and solid fuel were emphasized.
本章介绍的重点在于基础性研究，其中包括气体、液体和固体火焰水雾灭火的研究成果和现状。
It was the fourth test of the weapon, which can carry conventional or nuclear payloads of 1.5 tons and USES solid fuel.
这是该武器的第四次试射，它可以携带1.5吨常规或核的有效载荷，并使用固体燃料。
Nearly 2 million people die prematurely from illness attributable to indoor air pollution from household solid fuel use.
几乎有200万人因使用家用固体燃料造成的室内空气污染所致疾病而过早死亡。
The ground experimental studies on flame spread across solid fuel surface were conducted under various ambient pressures.
本文在地面环境和不同环境压力下，对热薄燃料表面的火焰传播进行了实验研究。
Nearly 2 million people a year die prematurely from illness attributable to indoor air pollution due to solid fuel use (2004 data).
每年接近200万人过早死于因使用固体燃料产生的室内空气污染而导致的疾病(2004年数据)。
With the inner combustion and flow analysis of solid fuel ramjet(SFRJ), the internal ballistic model within SFRJ is established.
通过分析固体燃料冲压发动机内部燃烧和流动过程，建立了固体燃料冲压发动机内弹道计算模型。
The reason for solid fuel utilization ratio being too low is analyzed, and some measures to reduce energy consumption presented.
分析了固体燃料利用率低的原因，提出了降低能耗措施。
It also suggests an analytical computational method for projectile base pressure under the condition of base bleed by solid fuel.
提出了一种可用于固体燃料底排条件下的底压解析计算方法。
A pot grate tests were conducted in the laboratory using different kinds of materials with various basicity and rate of solid fuel.
在不同原料、不同碱度和不同燃料配加量的条件下，在实验室的烧结杯上做了球团烧结法实验研究。
This paper introduces some results of theoretical and experimental aerodynamic investigation of base bleed by solid fuel combustion.
本文介绍固体燃料底部排气燃烧空气动力理论及实验研究的若干结果。
Oil and solid fuel heating mechanics install and maintain oil, coal and wood heating systems in residential and commercial buildings.
油和固体燃料加热技工安装和维护住宅及商业楼宇的石油，煤炭和木材取暖系统。
It is the problem for direct reduction process with oxygen enriched gas generated from solid fuel to produce qualified reduction gas.
制取合格的还原煤气是富氧煤气化直接还原竖炉新工艺的技术关键。
Three months 'test production shows that the technology has such advantages as improving the quality of sinter and lowering solid fuel.
三个月的试生产取得了初步成效，烧结矿质量提高，固体燃耗降低。
The temperature and concentration distribution in the aluminiferous solid fuel combustion are measured by BOXCARS with single laser pulse.
介绍了用单脉冲BOXCARS技术测量含铝固体燃剂燃烧场的温度及氮气的浓度。
This is China's first solid fuel ICBM (with a range of about 8,000 kilometers) and roughly equivalent to the U. s. Minuteman I of the 1960s.
这是中国的第一种固体燃料ic BM(具有大约8,000公里射程)和大概相当于美国1960年的民兵I型。
This paper briefly retrospects measures taken by the Sintering Plant in reducing sinter ore solid fuel consumption and the obtained effects.
简要回顾了莱钢烧结厂近几年以来在降低烧结矿固体燃耗方面采取的措施及取得的效果。
Based on the results, analyses of mechanisms of the flame spread across solid fuel surfaces in various ambient pressures were suggested in this paper.
在上述实验结果基础上，本文对热薄固体燃料表面在不同环境压力下的火焰传播机理进行了分析。
The solid fuel pellet (a ceramic oxide matrix) is the first barrier that retains many of the radioactive fission products produced by the fission process.
固体的燃料弹（陶式氧化物母体）是第一道防护，隔开裂变过程中产生的裂变放射。
Cold flow field and simple reaction flow field of the combustion of HTPB and PS within the solid fuel ramjet (SFRJ) are simulated using PHOENICS program.
应用PHOENICS软件模拟了固体燃料冲压发动机(SFRJ)的冷流和以HTPB、PS为推进剂的简单反应流。
The technique of reprocess shaping of solid fuel is applied in production widely. The design of special type bolt on pressing shaping machine is the key technique.
固型燃料的再生成形技术已广泛应用干生产，压制成形机的特种螺杆设计是技术关键。
Experimental studies have been conducted on feeding the solid fuel into sintered material sequentially in the different stages in light of different material conditions.
进行了在不同原料条件下实行固体燃料分加的烧结试验研究。
Experimental studies have been conducted on feeding the solid fuel into sintered material sequentially in the different stages in light of different material conditions.
进行了在不同原料条件下实行固体燃料分加的烧结试验研究。
应用推荐