The effects of dosage, species of emulsifier, initiator, relatine molecular mass modulator, reaction temperature, speed of stirring and the way of feeding on the process were investigated.
分别考察了相比、乳化剂及其用量、引发剂及其用量、搅拌速度、加料方式、反应温度等对实验结果的影响。
Mechanical driving system: the equipment user can choose stirring speed according to process features of the products.
机械传动系统：设备用户可根据产品工艺特点任意选择搅拌转速。
The melt temperature, stirring speed and proper shearing time were beneficial to the formation of fine globular grains.
即降低降体温度、搅拌速度及适当剪切时间有利于细小球形晶粒的形成。
The effects on stability of emulsifying wax such as emulsifier type, quantity, stirring speed, emulsifying time and emulsifying temperature were discussed.
探讨了乳化剂的种类、用量，制备乳化蜡的搅拌速度、乳化时间、温度等因素对乳化蜡稳定性的影响。
Discusses the relation between paste flowability and the speed and time of stirring.
本文探讨搅拌速度、时间与原糊流动性的关系。
The effects of different mechanical activating time, temperature and stirring speed on solubility and molecular weight of chitosan had been examined respectively.
分别考察了机械活化时间、温度及搅拌速度对壳聚糖溶解度和分子质量的影响。
The sealing property problem for the stirring shaft of high-speed pressured reaction axe with large length to diameter ratio is always a difficult problem to study for designers and users.
高速大长径比压力反应釜搅拌轴密封性能问题一直是设计者与使用者研究的难题。
The effect of temperature, air flow rate, stirring speed, initial mixing condition on the reaction rate and the speed form have been studied systematically.
探讨了反应温度、空气流量、搅拌速度、碱比、初始混合状态等因素对晶种制备过程中氧化速率及晶种形态的影响。
The results showed that sequence and way of feeding, reaction temperature, time of aging, stirring speed and drying and calcinations had remarkable influence on the pore structure.
结果表明，加料顺序、加料方式、成胶温度、老化时间、搅拌速率以及干燥焙烧等因素对孔结构均有明显影响。
In order to resolve the problems of high speed stirring machine in the production, this paper discussed the field experiment, the preparative work, empty car test, granulating process.
高速搅拌制粒机现场调试，前期准备工作，空车试验及实物制拉的调试技，在生产中经常遇到的问题及解决办法。
The effects of SO2 concentration, H2SO4 concentration, temperature and stirring speed on anodic reaction rate were investigated using potentiostatic polarization measurement.
通过SO 2阳极极化曲线的测定，考察了SO2浓度、H2SO4浓度、温度和搅拌速度对阳极反应速率的影响。
The influences of each component content in plating bath, temperature and stirring speed on electroless nickel plating were discussed.
讨论了镀液中各组分含量、温度及搅拌速度对化学镀镍的影响。
Drug release rate was significantly influenced by release area, stirring speed of peddles and the sorts of dispersion mediums respectively.
释放面积，桨的搅拌速度及释放介质均影响脂质体凝胶的溶蚀及药物的释放。
The degradation rate of TCAA was found to be related to the amount or particle size of the composition material and stirring speed.
研究发现，不同固液比、复合材料粒径不同、不同搅拌速度及不同气氛对TCAA的降解速率都有影响。
Stirring speed can withstand the maximum speed, maximum speed of the motor non-means.
搅拌速度为可承受的最高转速，非指电机最高转速。
Aspirin controlled release matrix tablets were prepared using quantitative controlling method of high speed stirring granulation technology.
用均匀设计法设计试验，对高速搅拌制粒工艺进行定量化控制，制备了阿司匹林控释骨架片。
The influence of the isothermal temperature, the stirring speed and the extrusion pressure on quality of the formed parts were investigated.
研究了半固态等温温度、搅拌速率和挤压力对成型件质量的影响。
The hematite can be better dispersed with the increase of stirring speed in a range, but the dispersion becomes worse when the stirring speed exceed a critical value.
在一定范围内增强搅拌强度有利于微细粒赤铁矿的分散，但搅拌强度超过某一临界值后分散效果变差。
Characteristic:very little air absorbed and remained, and good results of mixing evently. Middle or high speed stirring and disperding makes the material dissolved guickly and grains into small.
特点：搅拌、分散时空气吸留少，混合与调匀效果俱佳，用中或高速搅拌、分散可使物料迅速溶解，颗粒变小。
The results showed that rotating speed of metal fluid increased with raising the input voltage under a proper stirring frequency.
结果表明：在合适的搅拌频率下，随着输入电压的增大，金属流体的转速增大；
Stirring speed range: 40~200 R/Min, Impeller form: Push type of bicuspid spiral.
搅拌调速范围：40～200转/分，搅拌桨形式：二叶螺旋推进式。
Stirring speed range: 40~200 R/Min, Impeller form: Push type of bicuspid spiral.
搅拌调速范围：40～200转/分，搅拌桨形式：二叶螺旋推进式。
应用推荐