Experimental study on the error correction of spiral bevel gear.
螺旋锥齿轮误差修正试验研究。
Optimization method was used in the design of the spiral bevel gear of the main reducer.
采用优化的方法设计了主减速器螺旋锥齿轮。
Studied on and designed the pneumatic system for the spiral bevel gear burnishing machine.
该气动在国内是首次研究应用于数控螺旋锥齿轮研齿机。
The strength and stiffness of spiral bevel gear are analyzed based on the finite element method.
基于有限单元法分析了螺旋锥齿轮强度和刚度相关问题的计算方法。
The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.
给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。
The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out.
该研究是国内首次对螺旋锥齿轮动态力研齿进行的理论分析研究。
But the quality control of spiral bevel gear processing has been the key problem in the processing.
而螺旋锥齿轮加工质量的控制一直是其加工中的一个关键问题。
The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.
研究了菲亚特拖拉机后桥大圆锥螺旋齿轮淬火变形规律，分析了原淬火压模存在的问题。
End face of the power, the power side, spiral bevel gear drive, high speed, mute, overloaded accurate.
端面动力、侧面动力，采用螺旋伞齿传动，告诉、静音、重载、精准。
The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed.
分析了弧齿锥齿轮数控加工中产形轮和工件齿轮之间的展成运动，建立了弧齿锥齿轮齿面的数学模型。
Based on the local synthesis method, the tooth cutting of non-zero modified spiral bevel gear was researched.
借助于局部综合法，研究了非零变位弧齿锥齿轮的切齿设计。
The vibration characteristic of a miniature engine with spiral bevel gear engaging and case system were studied.
研究了具有锥齿轮啮合及机匣系统的某微型发动机的振动特性。
This paper studied 4-axis CNC spiral bevel gear machine movement rules, and set up machine machining coordinates.
研究了四轴数控螺旋锥齿轮铣齿机的运动规律，建立了铣齿机加工坐标系。
Considering all fuzzy factors which may effect on spiral bevel gear transmission, the writer calculates an example.
在充分考虑影响螺旋锥齿轮传动的各模糊因素的基础上，进行了实例计算。
A mathematical model of spiral bevel gear tooth surface was built by analyzing manufacture method and meshing theory.
通过分析锥齿轮的加工方法和齿轮啮合理论，建立了螺旋锥齿轮齿面数学模型。
The calculation method about the overlap coefficient of Klingelnberg spiral bevel gear system is studied and derived.
研究并推导出了克林·贝格螺旋锥齿轮副重迭系数的计算方法。
The purpose of this paper is to provide the theoretical basis for designing high-tooth spiral bevel gear cutter head.
本文的研究为等高齿弧齿锥齿轮的刀盘设计提供理论基础。
The study can provide the reference for the die design and technology design of precision forging of spiral bevel gear.
研究结果可为弧齿锥齿轮温锻成形的模具设计、工艺方案制订提供理论依据。
Additional dynamic load during Spiral bevel gear meshing is main cause of vibration and noise. Based on national standard.
螺旋锥齿轮啮合时产生的附加动载荷是螺旋锥齿轮传动产生振动、噪声的主要原因。
A new type of combination electrode of spiral bevel gear is developed. The design procedure of the electrode is presented.
研制了螺旋锥齿轮新型组合电极，提出了设计方法。
Using the spiral bevel gear as the research objective, the system put up the dynamic analysis of spiral bevel gear in the high level.
论文以弧齿锥齿轮系统为研究对象，对高速级弧齿锥齿轮进行了动力学分析。
Spiral bevel gear is the mechanical transmission fundamental element. Its space shape and the machining process are very complicated.
螺旋锥齿轮是机械传动的基础元件，其空间形状和加工过程相当复杂。
By using the same alternate blade cutter, bi-arc spiral bevel gear pair with equal-height tooth can be produced on the Gleason machine.
用同一双面刀盘在格里生机床上成功地切出了等高齿双圆弧弧齿锥齿轮副。
According to the result of interference test, the cutting tooth parameter is adjusted till the satisfied spiral bevel gear pair was acquired.
根据干涉结果对螺旋锥齿轮的切齿参数进行调节，直至得到比较满意的螺旋锥齿轮副。
Based on the theory of nonzero-coefficient spiral bevel gear, positive transmission can improve the gear's intensity and integrate capability.
根据弧齿锥齿轮的非零变位原理，采用正传动可大幅度提高弧齿锥齿轮的强度和综合性能。
The above research finds out the influence of grinder error and machining setting parameter error on tooth surface error of spiral bevel gear.
上述研究查明了磨床误差及加工调整参数误差对螺旋锥齿轮齿面误差的影响机制。
By applying SPC technology, the experimental study on processing performance of homemade YK2050 CNC spiral bevel gear grinding machine was done.
应用统计过程控制技术，对国产七轴五联动数控螺旋锥齿轮磨齿机yk2050的加工性能进行实验研究。
There is an obvious disparity between our nation and other developed nations in the field of hard surface finish machining of the spiral bevel gear.
在螺旋锥齿轮硬齿面精加工这一环节上，我国与发达国家的差距尤为明显。
The present invention relates to one kind of intelligent measuring and regulating instrument for assembled milling cutter machining spiral bevel gear.
本发明涉及一种智能化弧齿锥齿轮装配式铣刀盘测量调整仪。
The present invention relates to one kind of intelligent measuring and regulating instrument for assembled milling cutter machining spiral bevel gear.
本发明涉及一种智能化弧齿锥齿轮装配式铣刀盘测量调整仪。
应用推荐