ASTM E84-01 Standard Test Method for Surface Burning Characteristics of Building Material.
美国材料试验协会ASTME84 - 01《关于建筑材料表面燃烧特性的标准测试方法》。
ASTM D2197-98 (2002) Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion.
美国材料试验协会ASTMD2197- 98(2002)《有机颜料在刮擦下的附着性标准测试方法》。
Standard test method for critical radiant flux of floor-covering systems using a radiant heat energy source.
使用辐射热源法对地板覆盖物进行临界热辐射测试。
ASTM D2896-03 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration.
电位高氯酸滴定法对石油产品碱值的试验方法。
Standard Test Method for Nonvolatile Matter in volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products.
色漆，清漆，喷漆及相关产品用挥发性溶剂中不挥发物质的试验方法。
ASTM E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source.
ASTME970使用辐射热能源评定暴露的阁楼地板绝缘的临界辐射通量的试验方法。
Standard Test Method for dielectric breakdown voltage and dielectric strength of D149 ASTM solid electrical insulating materials at industrial power frequencies.
ASTM D149固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法。
Standard test method for oxygenates and paraffin , olefin , naphthene , aromatic o - pona hydrocarbon types in low - olefin spark ignition engine fuels by gas chromatography.
用气相色谱对低烯烃火花点火引擎燃料芳香碳氢化合物类型，环烃，烯烃，石蜡和氧化物的标准试验方法。
The scratch resistance of tinplate has attracted more attention recently. However, there is no standard test method for evaluating this kind of properties of tinplate so far.
电镀锡板弧表面抗划伤性近来受到越来越多的重视，但至今对此尚无统一的标准测试方法。
ASTM D570 Standard Test Method for Water Absorption of Plastics scope:this test method covers the detetmination of the relative rate of absorption water by plastics when immersed.
ASTMD570塑料吸水率的标准试验方法简介：ASTM D570包括了塑料在浸水时相对吸水率的试验方法。
The autogenous shrinkage of HPC develops greatly and mainly during early age due to a low water binder ratio, but there is no standard test method for early autogenous shrinkage of the concrete.
高性能混凝土因水胶比低、自收缩大且主要发生在早期，而目前对于早期自收缩的测量还没有统一标准可依。
The developed system USES weighing method for flow calibration, using electronic scale with high accuracy as the standard gauges to determine the actual flow of the different test points.
本系统对流量标定采用称量法，用高精度的电子秤作为标准量器来确定不同测试点的实际流量。
The features, method and standard of drop weighed tear test are described with its application in steels for pipes, pressure vessels and ship hull.
论述了落锤撕裂试验的特点、方法和标准，以及该试验在管道钢材、压力容器钢和船体结构钢薄板上的应用情况。
The standard method with atmospheric pressure correction for distillation test of coking benzene products is studied. The distillation range of coking benzene products is defined.
研究了焦化苯类产品蒸馏试验的气压补正标准方法，对焦化苯类产品的馏程范围进行了定义。
Fitting orthogonal polynomial method for characterizing the functional relationship between the dry density and moisture content of earth-fill in standard compaction test is presented.
提出了描述标准击实试验中土料干密度和含水量之间函数关系的拟合正交多项式方法。
For the standard analytical method, the series of standard solution for the determination of As, se and Hg in water by atomic fluorescence spectrophotometry must be prepared for every test.
在标准分析方法中，采用原子荧光分光光度法测定水中砷、硒、汞所用的标准溶液系列必须每次配制，给工作带来很大的不方便。
Based on standard test method ASTM C1550 for fibre reinforced concrete (FRC), a modified round panel test method for the material performance of FRC by measuring crack opening width is presented.
在美国材料试验协会标准ASTMC1550圆板试验方法基础上，提出一种改进的基于裂缝宽度量测技术的纤维混凝土(FRC)材料静定圆板试验方法。
Brucella blood culture is considered as the gold standard for the diagnosis of brucellosis and Brucella agglutination test is fast and effective as an assistant diagnostic method.
血培养是诊断布氏菌病的金标准，血清凝集试验是快速有效的辅助诊断方法。
The requirements for performance of automobile textiles and the standard on test method currently were presented.
介绍了对车用纺织品的性能要求及目前执行的测试方法标准。
Based on the introduction of principle and method in infiltration test of welding line, the standard is put forward for quality evaluation of joint construction in prestressed concrete pipe pile.
在介绍焊缝渗透探伤的基本探伤原理、方法及测试步骤的基础上，给出预应力砼管桩接桩焊缝的质量评定标准，并建议在管桩的施工中渗透探伤法可作为质量控制的常规检验手段。
The concept and grading method of the "martensitic grade" in the standard of "Metallographic test for Carburizing Auto Gear" were analyzed and discussed according to the experience and test results.
通过生产中的试验例证和检验结果，针对《汽车渗碳齿轮金相检验》标准中“马氏体级别”的概念和评级方法进行了分析和讨论。
Execution standard:The equipment is made by the standard of GB/T 10696《Test method for alkali-resistance of refractories》. All kinds of technical criteria accords with requirement.
执行标准：该设备按照国家标准GB 10696《硅铝质耐火浇注料耐碱性试验方法》对试验炉的要求而制作。
Experiments of standard test fires show that this method can realized for the compound measurement of smoke particles and co gas.
基于标准火的实验证明该方法可以实现烟雾颗粒和co气体的复合测量。
This standard specifies the theory, instruments & equipments, test conditions & materials, test methods, results and calculation of the test method for fluidity of cement mortar.
本标准规定了水泥胶砂流动度测定方法的原理、仪器和设备、试验条件及材料、试验方法、结果与计算。
Because the traditional calibrating method is not suitable for testing optical electric current transformer, a novel test system is designed based on the IEC standard and error analysis theory.
鉴于传统的电流互感器测试方法已经不适于校验新型的电流互感器，依据IEC标准和误差分析理论，提出了光电电流互感器的测试和校验方法。
Many factors may create the deviauon of determination result for spark discharge atomic emission spectrometric analysis, such as type standard choice and processing method for test spcimen.
选择类型标样的不同、试样加工方法的不同，都可能造成直读光谱仪测定结果的偏差。
Based on the test and analysis for existing state military standard of transistors, an effective method to control the moisture content is presented in the paper.
本文在对现有国军标晶体管封装腔内水汽含量检测及分析的基础上，提出了降低腔内水汽含量的有效办法和途径。
The article analyzes writing problem of experimental method for reverse bending and torsion in one direction test in national standard of steel wire products, and gives advice to this end.
分析金属制品国标中反复弯曲试验及单向扭转试验方法的书写问题，并对此提出建议。
RZ50 Table Top Milk Centrifuge is used for standard physiochemical test on the relative density and fat volue of milk products with the method of gerber and yinihupfu.
RZ50用于盖勃氏法和伊尼霍夫氏碱法对乳及乳制品的相对密度和脂肪进行标准的理化检验。
Various physical and mechanical properties of RCA from this technology were investigated according to Standard and Test Method for the Coarse Aggregate of Normal Concrete (JGJ 52-2006).
按照《普通混凝土用碎石或卵石质量标准和检验方法》（JGJ52-2006）测试了由该工艺生产的再生骨料的物理力学性能指标。
应用推荐