A straightening machine controller based on embedded technology is introduced in this paper.
本文介绍了基于嵌入式技术的自动校直机控制器的设计。
The force and performance of this straightening machine are analyzed and calculated for designing.
对矫直力能参数进行了分析计算，可为设计矫直机提供参考。
Optimization design on the roll array was done by taking two straight segments in the straightening machine.
采用了先进的具有两个连续矫直段的连铸机辊列曲线，对辊列进行优化设计。
Straightening roller straightening machine through the bars of pressure for them to change, such as straightness.
矫直机通过矫直辊对棒材等进行挤压使其改变直线度。
The straightening principle and the calculation method for the force and power of this straightening machine is discussed.
并论述了该矫直机的矫直原理及力能参数的计算方法。
Also a simple and practical subsidiary roller table structure design case of the pipe pressure straightening machine is shown.
对压力矫直机进出料辅助辊道结构设计给出了一个简易实用的示例。
The hydraulic-servo system of the precise straightening machine is the key to ensure the processing accuracy of the workpiece.
精校机液压伺服系统是保证工件加工精度的关键。
Based on the model, the straightening stroke can be calculated, so it is solved to apply FEM to automatic straightening machine.
使用该模型可进行矫直行程的计算，解决了有限元方法在自动矫直机上的应用问题。
YW42 series hydraulic straightening machine is suitable for heat treatment plant, steel plant, the use of plants for tube industry.
YW42系列液压校直机适用于：热处理厂，钢管厂，制管厂等行业使用。
Its control requirement is high and difficult. Its performance has a great influence on the performance of precise straightening machine.
它控制要求高、难度大，其性能对精校机的性能影响很大。
Thread one of Straightening machine series Roller Straightening hyperbola principle, thus greatly weakened the scratch of the reinforcement.
其中螺纹系列调直机采用双曲线辊调直原理，从而大大消弱了对钢筋的划伤。
The paper, combined with the 45~76 straightening machine designed, provides a theoretical method for designing the straightening roll camber.
结合已设计出的45～76焊管生产线中的六辊矫直机，阐明了矫直辊辊型设计的一种方法。
The Automatic On-chain Anode Steel Stub Straightening Machine is a new type of equipment that used in aluminum electrolysis rodding workshop.
全自动在链阳极钢爪校直机是用于铝电解组装车间的新型自动化设备。
The straightening machine and the straightening TECHNOLOGY straightening machine is a metal bar, pipe, wire, and other equipment for straightening.
矫直机是对金属棒材、管材、线材等进行矫直的设备。
The hydraulic-servo system of the precise straightening machine is the executive body and is the essential condition to realize straightening technics.
精校机液压伺服系统是精校机的执行环节，是实现校直工艺的必要条件。
Type of straightening of the main pressure, balance roller straightening machine, shoes roller straightening machine, anti-rotation bending leveler and so on.
主要类型有压力矫直机、平衡滚矫直机、鞋滚矫直机、旋转反弯矫直机等等。
The straightening machine checks the mechanical fasteners and the hydraulic transmission system during the shift, the operation handle and button can be normal.
矫直工在交接班时先检查机械紧固件和液压传动系统，操作手柄及按钮能否正常。
This paper states the basic principle of operation of cold drawing and straightening machine. It derives basic formula to determine the major size and parameters.
说明了该冷拉调直机的基本工作原理，推导了确定关键尺寸参数的基本公式。
Hydraulic position servo system of the precise straightening machine is the executive body and is the key unit to decide the processing precision of the workpiece.
精校机液压位置伺服系统是精校机的执行环节，是决定工件加工精度的关键部分。
To improve the precision and the efficiency in straightening drill pipes, we make a research in the control system of the automatic hydraulic straightening machine.
为了提高钻具校直的精度与效率，我们进行了全自动液压校直机控制系统的研究。
Simultaneously, the curvature before straightening also affects the size of force on straightening, and it also affects the life span of straightening machine deeply.
同时，钢轨的矫前弯曲度还影响矫直力的大小，进而影响矫直机的寿命。
This paper expounded the operating principle of automatic straightening machine for a shaft workplace and the design of hardware and software for its three main parts.
本文阐述了轴类工件自动校直机的工作原理及其三个重要组成部分(自动检测、工件定位和压头驱动)的硬、软件设计。
The straightness error mathematics model has been built, then the measuring and controlling system of redirector rack automatic straightening machine has been developed.
建立直线度误差的数学模型，研制全自动校直机测控系统，并用于轻型汽车和轿车的转向器齿条的检测和校直。
The straightening machine runs well and can achieve the technical motions and control demands during site debugging, which prove that the design and control scheme is feasible.
通过现场调试情况，该矫直机运行良好，可顺利完成工艺动作和各项控制要求，验证了系统设计和控制方案的合理性。
According to the production ability of small workshop, the selection and determination of structural parameter and technological parameter for straightening machine are discussed.
根据小型车间生产能力，论述了矫直机结构参数和工艺参数的选择与确定。
The mechanical structure of the straightening machine was designed, including the detect and locate system, the straighten system, the automatic loading and discharge system and so on.
在理论分析的基础上，根据校直过程的工艺流程和要求，完成了自动校直机的机械设计，主要包括检测与定位系统设计、加载校直系统设计、自动上下料系统设计。
The paper introduces the process automation model specification system of heavy and medium plate rolling production line hot straightening machine in TangShan heavy and medium plate Co.
介绍唐山中厚板公司中厚板轧钢生产线热矫直机过程自动化模型设定系统的组成、主要数学模型。
The paper introduces the process automation model specification system of heavy and medium plate rolling production line hot straightening machine in TangShan heavy and medium plate Co.
介绍唐山中厚板公司中厚板轧钢生产线热矫直机过程自动化模型设定系统的组成、主要数学模型。
应用推荐