In addition to the strain gauge, all the electronics required to handle the signal-processing and communications are embedded within the silicone lens (pictured).
除应变仪之外，所有要求能够应付信号处理及通信的电子设备都被植入硅胶镜片内(见图)。
A metal strain gauge on the surface of each membrane senses that deflection and generates a signal that indicates pressure.
在每片硅原子膜的表面有一个金属制压力感应器，能检测压力的大小并发出信号。
Plaster the electron strain gauge on PCB stress boundary to measure the strain cost with both strain electrical logging technology and theory.
在印刷电路板受力边界粘贴电子应变片以应变电测技术和原理测定各测点的应变值。
Stress coating is adopted in order to determine the points and directions of the most main stress of the frame, resistance strain gauge method used for determining main stress value of the frame.
在模型实验应力分析中采用脆性涂料法确定模型机架最大主应力部位和主应力方向，采用电阻应变测量法确定模型机架的主应力水平。
Last, this paper explicate systematic dynamic strain gauge some principle about data acquisition and graphics display.
最后，系统介绍了动态应变仪及计算机数据采集和图形显示系统的工作原理。
It analyses the measuring principle of dynamic strain gauge and introduces the principle of adjusting balance.
分析了动态应变仪的测量原理和调平衡技术的原理。
This essay emphasized the implementation of intellectuality and network of the high precision ground strain gauge and presented examples of application.
本文介绍了洞室定点高精度地应变仪网络化的实现过程，并给出了应用实例。
The testing result indicate that the testing performance of constringency transmutation testing apparatus for pavement material is excel to the strain gauge in the stabilization and precision.
试验表明，路面材料收缩变形测试仪测试性能在准确性和稳定性等方面要优于应变仪。
Shunting resistance box is a commonly used method in the determination of the sensitivity coefficient of the resistance strain gauge with the equal-strength beam aparatuses.
采用等强度梁、挠度计、并联电阻箱、电位差计等测定电阻应变计的灵敏系数是一种常用的方法。
An overview of the features of strain resistance alloy for foil strain gauge in property, composition, application and process is introduced.
简述箔式电阻应变计用应变电阻合金的性能要求、种类、应用以及工艺特点。
This paper describes the development, design principle and main features of type YCD-1 ultra-dynamic strain gauge, and the application of it to strain testing in the near-blasting field.
介绍了YCD - 1型超动态应变仪的研制、设计原理和主要特点，及在爆破近区应变测试中的应用。
Its unique strain-gauge design delivers excellent measurement precision and stability as well as providing maximum overload protection.
其独特的应变设计提供了极好的测量精度和稳定性，以及提供最大限度的过载保护。
The thin-film strain-gauge weighing sensors were fabricated by thin film techniques.
运用薄膜沉积技术，制作了薄膜应变栅式称重传感器。
On basis of practice teaching, this paper introduced some obvious features and attentions and some technic problems when measuring pressure vessels stress with resistance strain gauge.
该论文介绍了当电阻应变法用于压力容器应力测量时具有的一些明显的特点及注意事项和可能遇到的一些技术问题。
A strain gauge is a force-sensing element whose resistance changes in proportion to the amount of force applied to the element.
这种张力传感器元件是检测力的元件，其电阻值与作用于其上的力成比例。
The measuring results for the micro displacement and the strain indicate that the optic fiber strain gauge offers a monitoring method both strain and distortion.
通过微位移架上的位移测量实验与悬臂梁上的应变测量实验，结果表明该光纤应变片提供了同时适合于应变与形变的检测方式。
The temperature effect on concrete strain gauge was analyzed and the temperature correction method of strain gauge was also presented.
针对应变测试过程中温度变化对应变测试的影响作了深入的探讨，提出了应变计温度影响的修正方法。
The wide range strain gauge with large electric resistance should be used to improve the test accuracy, because of the large strain in CFT model and the unfavorable influence of environment noise.
钢管混凝土柱模型试件的应变量级很大，环境噪声影响较大，可采用大阻值和大量程应变片提高应变准确度。
Fourth chapter mainly elaboratess the signal conditioning circuit of strain gauge and the supply circuit of strain bridge system's design methods.
第四章主要阐述了应变仪信号测量电路及电桥电源电路的设计方法。
A new general prefabricated strain sensor called FBG strain gauge is designed, which can be used as a quadratic transform component.
提出一种适合作为二次变换元件使用的通用型应变传感预制结构——光纤光栅应变片。
The paper introduces the advantages of strain gauge electric metering technique, the application in designing typical product and precautions of applying this strain gauge electric metering technique.
简要介绍了应变电测技术的优点、在典型产品设计中的应用情况和使用时的注意事项。
The performance of pressure sensor lies on the design of sensitive girder, selection and sticking of strain gauge and design of metrical circuit.
冲击式谷物流量传感器是常用的测产装置。 流量传感器的性能主要取决于敏感梁的设计、应变片的选取粘贴以及测量电路的设计。
The response characteristics of wrist force sensor determined the sticking of sensor's strain gauge and sensor's orientation method and also affected the dynamic characteristics of robot system.
腕力传感器的响应特性决定了传感器应变片的粘贴和传感器的标定方法，也影响机器人系统的动态特性。
The temperature coefficient of modulus of elasticity of sensing element material result in temperature effect on rated output of strain gauge load cell.
应变式负荷传感器额定输出温度影响是由于弹性体弹性模量的温度系数引起的。
Because it has a high working temperature, the high temperature strain gauge is necessary in composing the strain measurement electric-bridge.
由于工作温度较高，所以需采用高温应变片来组成应变测量电桥。
This paper describes the transducer of the resistance strain gauge, the formulas for its principal stress and the application of the earthquake prediction.
本文介绍了电阻应变片传感器及其主应力公式和在地震予报中的应用。
Objective To develope a new instrument with a pressure sensitive strain gauge for measuring the pain perception threshold of oral mucosa.
目的研制电阻应变式口腔黏膜压力测痛仪，并对正常年轻人的牙龈黏膜疼痛阈进行测试。
Objective To develope a new instrument with a pressure sensitive strain gauge for measuring the pain perception threshold of oral mucosa.
目的研制电阻应变式口腔黏膜压力测痛仪，并对正常年轻人的牙龈黏膜疼痛阈进行测试。
应用推荐