The stress-strain distribution, the effect of the main forming parameters on forming process, and the possible flaws in the forming process are analyzed.
应变分布、主要成形参数对成形过程的影响以及成形过程中可能产生的缺陷进行了分析。
At first, linear stress analyses were performed to investigate the stress-strain distribution of axially compressed column-supported steel silos with engaged columns.
通过线性分析初步了解了轴压下仓壁柱承钢筒仓的应力应变分布特性。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Only if this short crack extends long enough and blunted wide enough, can it affect the principal crack extension and the distribution of stress and plastic strain.
只有小裂纹扩展到足够长并钝化到足够宽，才能够影响主裂纹的扩展及其前端应力、应变的分布。
Strain fatigue and stress fatigue are related by the influence coefficient of strain distribution.
通过应变分布影响系数把应变疲劳与应力疲劳联系起来。
This paper shows that the shear stress distribution in bonding layer has similar characteristics as the strain distributions near the ends of the actuator.
通过分析可得，粘贴层剪切应力的分布与致动器端部附近的应变分布有相似的特征。
It is difficult to calculate theoretically the exact distribution of the stress and strain because of the complex structure of landing gear.
由于起落架的结构比较复杂，很难通过理论计算得出准确的应力应变分布。
Objective: To analyze the influence of different tilted angle on the distribution of the stress, strain and displacement on the implant_bone interface.
目的：分析不同倾斜种植对种植体界面应力、应变及位移分布状况的影响。
A study of the stress and strain distribution of anchorage zone in a long span PC box girder was undertaken in the background of Hangzhou Bay Bridge project.
本文以杭州湾跨海大桥北航道非通航孔桥为工程背景，对大跨度预应力混凝土箱梁锚固区混凝土的应力应变分布特征进行了分析研究。
This paper shows that the shear stress distribution in bending layer has similar characteristics as the strain distribution near the ends of the actuator.
通过分析可得，粘贴层剪切应力的分布与致动器端部附近的应变分布有相似的特征。
AIM: To determine the stress and strain distribution of femur under impact force during human gait cycle.
目的：考察人体步态运动过程中冲击载荷作用时的应力和变形分布。
The images from result show the distribution of stress and strain and supply basis for the analysis to the change of stress and strain.
从计算结果中提取应力应变云图显示了工件及刀具的应力应变分布情况，以此对切削过程中应力应变的变化进行了分析。
In order to strengthen anti fatigue of cold worked hole, it is necessary to control the magnitude and distribution of the surface residual stress and strain.
为了使冷挤压孔真正起到抗疲劳增寿效果，有效控制孔表面残余应力大小及其分布是至关重要的。
The bending and shear modifying coefficients are derived according to the distribution of the stress and strain of the sandwich plate along the direction of the plate thickness.
根据夹层板的正应力、正应变和剪应力、剪应变沿板厚的分布关系，得到夹层板的弯曲、剪切修正系数。
Comparison of four different combinations of the same time, the stress and strain distribution, the size of the plastic zone.
同时对比了在四种不同组合时，应力、应变的分布，塑性区范围的大小。
Secondly, the model of deck pavement is analyzed by finite element software ANSYS to get its stress and strain distribution.
其次，本文使用ANSYS通用有限元策略对桥面铺装模型进行浅析浅析并得出它们的应力应变分布。
This shows that interface curves becomes more and more complex. This may be due to the distribution of stress and strain, oxide, condition of interface and so on.
这可能是由于应力应变分布、氧化物、界面结合情况改变等综合因素造成的结果。
Through the various components of the stress and strain field distribution, as well as the typical node displacement curve analysis, to study the variation of the motion state of rolling bearings.
本文对滚动体和内外圈的应力、应变场的分布情况以及对滚动体上典型节点处的位移曲线进行了分析，并获得了滚动轴承在运转过程中比较直观、定量的分析数据。
The results show that the stress and strain distribution around the cold worked hole are similar between the model and real object.
结果表明：带衬套挤压和不带衬套冷挤压时孔边载荷的分布，模型材料与原型实际挤压结果相似；
The influence of pouring temperature and shakeout temperature on the temperature field distribution, cooling velocity, stress and strain was analyzed.
分析了浇注温度、落砂温度对温度场分布、冷却速度、应力和应变的影响。
Furthermore, stress strain distribution in the solder joints has dynamic feature during temperature cycling and is related to temperature history.
在温度历史过程中，应力—应变场等值分布图呈现动态特性，且与温度历史相关。
The strain state of the emplaced magma is shown by ellipsoid parameters, and distribution of stress field of the magma reflects the ways of emplacement and tectonic environment.
从磁化率椭球参数可以看出岩浆侵位的应变状态； 岩浆应力场分布体现了岩浆侵位方式及其所处构造环境。
The results show that the homogeneous stress and strain profiles can be obtained by adjusting the distribution of hole for a given number of holes on the surface of the reinforcement.
结果表明，孔隙率不变的情况下改变增强体上孔排布方式，可以获得均匀分布的的表面应力和应变；
Stress and strain contours of the stator under an even inner pressure and a pressure difference, deformation distribution varied with pressure were obtained.
对定子和螺杆进行接触计算，结果表明：定子与螺杆在圆弧顶接触时，剪应变和变形最大；
The stress distribution of a curved pipe with an initial elliptic cross section under internal pressure was studied by using electric resistance strain method.
采用电阻应变测量技术研究了带有初始随圆度的弯管在纯内压作用下的应力分布。
Crack growth was analyzed by using element eliminating method based on the variation of damage variable. Material flow, strain, stress and damage distribution of different steps was achieved.
根据损伤变量的变化，采用单元消除法分析了剪切裂纹的扩展，并得到了剪切各个段的金属流动、应力应变以及损伤变量分布。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
本文采用三维有限元方法，研究堰闸坝在静力状态下其应力和变位的分布规律。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
本文采用三维有限元方法，研究堰闸坝在静力状态下其应力和变位的分布规律。
应用推荐