Minimum and maximum temperature limits for the coated surface and for ambient air shall be supplied by the coating material supplier and must be followed.
对涂层表面和环境空气的最大温度和最小温度的限制应当由涂层材料供应商提供，并应严格遵守。
Insulating layer: coating on the electrode or hanging fixture, a part of the surface of the part of conductive material layer.
绝缘层：涂于电极或挂具的某一部分，使该部位表面不导电的材料层。
As in, can you abrade small particles of the material or surface coating and leave behind an original looking surface.
也就是你可以研磨材质或表面涂层的一小部分并且让它们恢复成原本看起来的表面外观吗。
Surface paint molecules provide inlaid evenly and slightly rough, organic or inorganic material coating shall contain polar groups charged.
提供镶嵌油漆分子均匀而微粗糙的表面，涂漆层中的有机或无机材料应含有带电荷的极性官能团。
Those mainly reside in understanding depth of and attention level to the coating material, coating structure design, surface cleaning process and heating drying process.
主要反映在对涂层材料、涂层结构、表面处理工艺、热固化工艺等设计的理解深度和重视程度上。
The coating procedure thereof is described in terms of the material selection, substrate treatment, stain primer, binding primer, surface primer, finishing and et al.
分别对材料选择、底材处理、底着色、涂一道底漆、涂二道底漆、面修色、涂面漆工艺进行了处理。
Moreover, CrN coating also has excellent welding resistance with non-ferrous metals, and is also applied for surface coating to cutting tools of copper material, for example.
本涂膜对有色金属有很高的耐溶接性，适用于铜材料等切削工具的表面涂膜加工。
In the Marine environment, the ship's anti-corrosion coating surface will be gradually eroded to failure, eventually leading to the metallic matrix material corrosion damage.
在海洋等服役环境的作用下，船舶表面的防腐蚀涂层会受到侵蚀而逐渐失效，最终导致金属基体材料的腐蚀破坏。
A. surface coating is mainly used for the absorbent material, such as aluminum foil, aluminum plating paper and various kinds of film material.
表面涂布主要用于非吸收性材料，如铝箔，镀铝纸以及各类薄膜材料。
However, once the treated surface has been interfaced with a coating, ink, adhesive, or another material, the bond becomes permanent.
然而，一旦处理的表面已经连接了涂料，油墨，胶粘剂，或另一种物质，债券成为常任理事国。
Plating: Coating a metal or other material, such as plastic or china, with a hard, nonporous metallic surface to improve durability and beauty.
镀覆：对金属或其它一些材料，如塑料或瓷器，镀上一层硬而密实的金属表面，以提高耐用性并增进美观。
New coating material of the surface keyboard became the felt, in which on the stencil were the cutout holes for the keys.
新的涂层材料的表面上的键盘，成为认为，在其中对样板被抠出洞的钥匙。
Isolating-sound and decoupling coating is a important underwater acoustic material and structure, and it is coated the outer surface of the submarine body which is used to support sound press.
隔声去耦覆盖层是一种重要的舰船水声材料与结构，敷设于潜艇艇体耐压壳外表面。
It has always been one of the key research directions in the material field at home and abroad to form solid nanometer ceramic coating on the surface of metallic material.
在金属材料表面形成牢固的纳米结构陶瓷涂层一直是国内外材料领域重点研究的方向之一。
The surface properties of traditional material could be greatly improved through surface treatment such as laser coating of super fine ceramic powder.
用陶瓷超微粉作熔覆材料，对常规材料进行表面处理，可以极大的提高材料的表面性能。
Compared with the existing coating material, the film of the coating material simultaneously has the advantages of smaller surface roughness, higher hardness and better wearing resistance.
与现有的镀膜材料相比，本发明提供的镀膜材料的薄膜同时具有较小的表面粗糙度、较高的硬度和较好的耐磨性。
The coating surface must not have the fat, the dust dirty and the loose material, the newly built wall needs fully bone dry.
需上漆的表面要无油脂、尘污和松散物质，新建的墙壁需充分干透。
The non-conformities are as follows: 1, the thickness of FBElayer is thin, the FBE coating material can not cover the steel surface entirely.
其表现为：1、熔结环氧粉末（FBE）层偏薄，不能完全覆盖管道金属表面。
Metal material at high temperature paint, sandblasting masking surface protection coating, high temperature paint baking, the easy peeling without leaving adhesive residue.
金属材料高温喷漆、喷砂涂装遮蔽表面保护，高温喷漆烘烤后，易剥离不留残胶。
Methyl methacrylate(MMA)is used as raw material for producing polymethacrylate, and it is also widely used in surface coating, synthetic resins, paint and coatings, adhesives and medical products.
甲基丙烯酸甲酯（MMA）是生产有机玻璃的原料，广泛用于表面涂层、合成树脂、油漆涂料、胶粘剂工业和医用高分子材料工业。
Machinery Industry: Using nano-material technology for key components of mechanical nano-powder coating the metal surface, can improve the mechanical equipment, wear resistance, hardness and life.
机械工业：采用纳米材料技术对机械关键零部件进行金属表面纳米粉涂层处理，可以提高机械设备的耐磨性、硬度和使用寿命。
Machinery Industry: Using nano-material technology for key components of mechanical nano-powder coating the metal surface, can improve the mechanical equipment, wear resistance, hardness and life.
机械工业：采用纳米材料技术对机械关键零部件进行金属表面纳米粉涂层处理，可以提高机械设备的耐磨性、硬度和使用寿命。
应用推荐