It is confirmed by the latter that the fluid must cross from one side of the cell to the other in the tangential direction.
失速区与非失速区之间存在着复杂的质量交换，后者证实了失速区边缘处存在穿越流动现象。
Poplar is more suitable to be compressed industrially due to the little difference of recovery on the radial and tangential direction.
杨木径向和弦向压缩回复差异较小，更适宜大幅面压缩密实加工。
The poison error along disk tangential direction decreases the DPD signal amplitude, and the factor is 1.52T when position error is less than 25%.
计算结果表明：沿盘片切向的位置误差使DPD的幅值变小，在25%的范围内DPD的幅值随切向位置误差的变化系数为1.52T；
The main frequency of vertical direction and horizontal tangential direction both have phenomenon of end amplification which doesn't afford the sadov's formula.
垂直方向主频和水平切向主频都存在着末端放大现象，这与萨道夫斯基公式不符。
Vitreous fovea traction played some roles in the formation of idiopathic macula hole in its early stage, but the traction included anterior and tangential direction.
玻璃体黄斑牵拉力在裂孔形成早期阶段起一定作用，其作用方向可能包括前向和切线方向。
Based on lots of tube bending experiments, the stress-strain state along the tangential direction of bending line and the direction of the wall thickness is analyzed.
通过大量管材弯曲试验，分析了沿弯曲线的切向和管壁厚方向的应力应变状态，给出弯管内、外侧管壁厚变化量和切向应变的近似计算公式。
In order to reflect the non-coaxial phenomenon, a non-coaxial plastic strain rate term is added to the tangential direction of conventional constitutive model's yield surface.
通过在屈服面的切线方向增加一项非共轴塑性应变增量，即可实现对非共轴现象的反映。
Behind the tandem cascades, the variations of mean velocity and turbulence intensity along the tangential direction become more gentle than that behind the single-row cascade.
串列叶栅的尾迹平均速度和紊流脉动速度沿额线方向比单列叶栅变化平缓。
It is shown that the cutting chips are shorter and the cutting route is longer in ultrasonic vibration assisted grinding along tangential direction than that in conventional grinding.
分析表明：切向超声振动辅助磨削可以得到更短的切屑，更长的切削路径长度。
Theoretical formula of wood thermal conductivity in tangential direction was derived by analogy from the fact that heat conduction of the material was similar to its electric conduction.
应用类比推理的物理学方法，从材料的导热与导电的相似性，推导出木材弦向导热系数的理论计算公式。
The cracking direction is determined by a simplified maximum tangential stress criterion.
开裂方向的计算采用了一种简化的最大切向应力准则。
Direction: physiognomy tangential contact with, and objects with relative movement trends in opposite directions.
方向：面相切接触，并与物体的相对运动趋势的方向相反。
Swelling efficiency in vertical direction of compressed direction was the smallest in tangential, the biggest in radial and middle in non standard direction compression.
压缩木压缩方向的垂直方向上的膨胀率，弦向压缩最小，径向压缩最大，非标准向居中。
The cold flow field in the tangential firing boiler furnace is numerically studied by using ALE algorithm together with a grid system which is consistent with the flow direction in the furnace.
采用ALE算法，选用与流动方向较一致的网格体系，对四角切向燃烧煤粉锅炉炉膛内冷态流场进行了模拟。
Analyzed from the stress Angle, the lathe-bed is mainly imposed by a vertically upward force, moreover, the lathe-bed is not slender, so the direction of tangential stress should not be ignored.
从床身的受力角度看来，床身主要受到垂直方向上的力，而且床身不是细长的结构，切应力的方向不能忽略。
Analyzed from the stress Angle, the lathe-bed is mainly imposed by a vertically upward force, moreover, the lathe-bed is not slender, so the direction of tangential stress should not be ignored.
从床身的受力角度看来，床身主要受到垂直方向上的力，而且床身不是细长的结构，切应力的方向不能忽略。
应用推荐