The relationship between stress and strain in a particular material is determined by means of a tensile test.
最佳答案之间的关系应力和应变在一个特定的物质决心通过拉伸试验。
A uniaxial tensile test method for measuring mechanical properties of MEMS thin film materials is presented.
介绍了一种用于MEMS薄膜材料力学特性测试的单轴拉伸试验方法。
The backlight photography with single sample was used to measure the true stress-strain of the ductile material after necking in tensile test.
本文采用单试样逆光拍照法对延性材料拉伸试验缩颈后的真实应力-应变进行了有效的测量。
This paper analyzes the uncertainty of tensile test measurement for square specimen and gives formulae to calculate the uncertainty of measurement.
对矩形试样拉伸试验测量的不确定度进行分析，得出了计算其不确定度的公式。
By the uniaxial tensile test, the effect of coupling agents on mechanical properties of the composite propellant with fillers different in surface property is studied in this paper.
本文用不同界面性质填料的推进剂，经单轴拉伸试验，研究偶联剂对不同填料提高推进剂力学性能的偶联效应。
The mechanical property of AZ31 magnesium alloy rolling sheet under different temperatures and strain rates was studied through uniaxial tensile test.
通过单向拉伸试验研究了AZ31镁合金轧制板在不同温度和应变速率下的力学性能。
The sensibility of the harden structure of high carbon steel to hydrogen and stress is researched through the tensile test of quenched specimens and charging hydrogen specimens after quenching.
利用高碳钢淬火试样及淬火后充氢试样的拉伸试验，研究了高碳钢淬硬组织对氢和应力的敏感性。
The quasi-superplasticity of leaded brass for bearing cage was investigated through the constant velocity tensile test.
通过恒速拉伸试验，对一种生产保持架用铅黄铜的准超塑性进行研究。
Layered fracture occurs after tensile test of high strength ship plate.
高强船板拉伸试验后出现断口分层现象。
The change of strain rate and stress rate of samples with and without yielding phenomenon was studied during the tensile test under the control of grip separate rate.
采用夹头分离速率控制方式对有屈服现象和无屈服现象的试样进行拉伸试验，探讨了试验过程中试样应变速率和应力速率的变化情况。
Tensile test shall be carried out on one pipe sample representing each inspection lot. But not less than one pipe sample representing each heat test.
每批检验品只抽一个钢管代表整批的来做张力测试，但是至少有一个以上样品代表整批做热度测试。
The characteristic values of micro shear test and tensile test of alloy aluminium were determined and the quantitative expressions of these characteristic values were studied.
测定了铝合金的微型剪切试验和拉伸试验的性能参数，研究了这些性能参数之间的数量关系式。
Through the tensile test in SEM, the constraint effects of particles have been investigated qualitatively in microscope.
在SEM下的拉伸试验，直接从微观上证明了这种约束的作用。
If a tensile test specimen fails to meet the requirements of 7.4.2, two further test specimens shall be obtained for each one that failed.
如果抗拉强度试样不符合7.4.2的要求，对每一个不合格的试样再取两个试样进行试验。
Studies the effect of the pre-polygonization heat-treatment on the recovery and recrystallization of cold-deformed steel 45 by TEM, tensile test, hardness test and thermal analysis.
本文用电镜观察、拉伸试验、硬度试验、差热分析等方法研究了45钢冷形变后的预多边化处理对随后的回复、再结品过程的影响。
Through study on triaxial tensile test of soil from the dike of Yellow River, a lot of beneficial results are achieved.
针对黄河大堤典型土质开展了三轴抗拉试验研究，得出了许多有益成果，并就具体应用方法进行了探讨。
The toughening mechanism of ADI was investigated by microstructure analysis and fracture characteristics of the specimens under tensile test. contact fatigue and stress fatigue.
通过奥贝球铁的单调拉伸加载、接触疲劳和应变疲劳等宏观断裂规律和微观分析，探讨其强韧化机制。
This paper presents the design and production of submarine composite power cables with optical fibers as well as the mechanical tests-wrapping test, tensile test and bending test.
本文叙述了海底光纤复合电力电缆的设计、制造及进行的盘绕、拉伸、张力弯曲等机械性能试验。
The tensile test of Q235 steel under static loading condition was done, and the stress of every level selected was tested by EMS2003 metal magnetic memory testing system.
选取Q 235钢进行静载拉伸试验，利用EMS2003型磁记忆检测系统进行各级应力水平的检测。
The relationships between damage energies of HTPB propellants and storage ageing time were investigated by uniaxial repeated tensile test.
由单轴反复拉伸试验分别研究了含键合型防老添加剂和防老剂h的HTPB推进剂破坏能与贮存老化时间的关系。
The mechanical properties and fracture process observation was studied by in-situ tensile test of 93w-y2o3.
研究93 W - Y 2o 3合金的力学性能，并通过扫描电镜原位拉伸试验观察93W - Y 2o 3合金的断裂过程。
To meet the needs of tensile test for small diameter bolt and screw, this article gives a design of tensile testing device.
针对小直径螺栓和螺钉的拉伸试验要求，设计了一种拉伸试验装置。
Finite element analysis software is feasible to simulate the failure analysis of tensile shear test, even partial replacement of shear tensile test.
证明用有限元分析软件对点焊结构进行失效模拟的可行性，甚至可以部分替代剪切拉伸试验。
The fracture surface appeared intergranular crack, due to the oxide formed during tensile test.
拉伸过程中形成的氧化物夹杂成为裂纹源，断口表现为沿晶断裂。
The influences of deformation rate on the mechanical properties of 304 austenitic stainless steel were studied by tensile test at room temperature.
采用室温拉伸实验研究了不同变形速度对304奥氏体不锈钢力学性能的影响规律。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
Direct tensile, acceleration, and shock wave tests belong to the tensile test group, whereas adhesive tape, direct shear, peel and scratch tests belong to the shear test group.
直接拉离、加速和冲击波等方法属于拉力法，而胶带、直接剪切、剥离和划痕等方法属于剪切法。
In this paper, the effects of the temperature fluctuation and the initial grain size inhomogeneity on the deformation process in a superplastic tensile test have been analysed.
本文分析了由于温度的波动及初始晶粒尺寸差异对超塑性拉伸过程的影响。
The anisotropy and it's evolution during ageing treatment for Al-Li alloy 1420 cold-rolling sheet were investigated by means of tensile test and fractograph observation.
通过力学性能测试和断口形貌观察，研究了1420铝锂合金冷轧薄板的各向异性及其在时效过程中的演化规律。
Effects of tin on the microstructure and mechanical properties of ZA62 alloys were investigated using optical microscopy, XRD analysis and tensile test.
采用金相显微镜、X射线衍射仪等分析测试手段，研究了锡对ZA62合金显微组织及力学性能的影响。
应用推荐