Methods: By adding dissolution enhance to make test solution to be homogeneous.
方法：采用加入增溶剂，使供试液成为均匀的乳化状态。
The E4360 satisfies this need by providing an affordable, high power, compact test solution.
E4360通过此测试解决方案（买得起、高功率、紧凑性）恰好能满足该需求。
As the silica gel can deepen the color of the test solution, the optical density is increased.
由于硅胶能加深试验溶液的颜色，引起光密度增加。
We will share the new test solution for automotive Radar system, key module with everyone in this session.
本专题将与大家分享汽车毫米波雷达的系统组成、关键组件以及相关的最新测量方案。
Objective: Discussed the preparation method of the test solution of cod liver oil as well as fat soluble drugs.
前言：目的：对鱼肝油胶丸等非水溶性药品供试液的制备方法的探讨。
The typical variable factors are stability of the test solution, times and duration of sample extraction, and so on.
典型的变动因素有：被测溶液的稳定性，样品提取次数、时间等。
This represents the ratio of relative humidity of the air over a test solution compared with that of distilled water.
给定温度空气中湿度与其平常最大湿度的比率；用百分比表示。
In view of this, the test solution method can be used for solving the more difficult problems of the static electricity.
由此引入尝试解的解题方法，以解决比较复杂的静电学问题，提高学生分析问题、解决问题的能力。
Identity of viscosity for test solution and its blank solution, and the effect of medium and detection limit were studied.
对介质影响、试液与空白溶液粘度一致性及检出限进行了考察。
This device is suitable for the static toxicity tests which need short test timo and large amount of test solution removal.
该装置适用于试验时间短，数量大的更换试验液的静态毒性试验。
The test indicated that the physical properties of test solution is identical with its blank solution. RSD were less than 2.1%.
实验表明试液的物理性质与空白溶液一致，测定结果的相对标准偏差小于2.1%。
Experience in developing test specification, test solution, test requirements. Experience with power supply product test spec and case.
有开发测试规范、测试方案的经验，有电源产品相关的经验优先考虑。
While providing some of the real machine test solution to the problem, these methods are summarized in the usual test of personal experience.
同时提供了一些在真机测试的解决问题的方法，这些方法都是在平时的测试中总结下的经验。
The test indicated that the viscosity of test solution is identical with its blank solution and there is not background absorption interference.
试验表明，试液的粘度与其空白溶液的一致，无背景吸收干扰。
The test solution is to sense light shine, put the coil with the plate, a long red light when taking iron, brake rod fall automatically is normal.
测验办法是，地感红灯闪耀时，用铁板放在线圈上，红灯长亮时取走铁板，闸杆主动落下则正常。
The experimental results indicated that viscosity of test solution is identical with its blank solution and there is not background absorption interference.
试液的粘度与对应空白溶液的粘度一致，无背景吸收干扰。
Simulated annealing algorithm is used to get the optimum test solution, and it demonstrates its advantage over other solution published recently in test time.
最后本文用模拟退火算法来优化测试调度，实验结果表明此算法调度的测试时间要比报道的结果都好。
Determine the concentration of acetate in the test solution using the calibration curve generated by the average of the readings obtained with the reference solutions.
由对照溶液的平均读数得到校正曲线，用该校正曲线测定供试液中醋酸盐的浓度。
Dissolve a portion of the substance under examination in the designated Medium to obtain a test solution having the concentration specified in the monograph for solution.
将一份该供试物质溶于指定的媒介中，以得到供试溶液，该供试溶液的浓度是在该专论中溶液项下所规定的浓度。
Aspirate the reference solution after every third calibration or test solution to check stability of base line. Calculate standard deviation for every third solution aspirated.
在对被测试溶液进行三次校准后，就要抽取标准溶液进行校验其基线的稳定性，并计算每三次抽取的溶液的标准偏差。
The paper introduces main EPON technology, which includes ranging, ONU joining and upstream transmit alignment, etc. It also introduces EPON testing methodology and IXIA test solution.
简要介绍了EPON的一些关键技术，包括测距，ONU的自动加入，上行信道接入等技术，详细介绍了EPON测试方法和IXIA公司测试解决方案。
The stabilization time of suspension, amount of hydrochloric acid solution(1+1), identity of viscosity for test solution and its blank solution, background absorption interference were studied.
对样品悬浮液稳定时间、盐酸溶液（1+1）用量、试液与空白溶液粘度的一致性、背景吸收干扰进行了考察。
The pretreatment condition of sample, chemical interference, identity of viscosity for test solution and its blank solution, background absorption interference and detection limit were all studied.
对样品处理条件、化学干扰、试液粘度与空白溶液粘度的一致性、背景吸收干扰及检出限进行了考察。
It also provides a flexible framework for creating the right test management solution for any project or organization's needs.
它也为创建满足任何项目或组织需要的正确测试管理解决方案提供了一个灵活的框架。
This can be an appropriate solution for development and test environments where the cost of a full monitoring solution is not justified and development skills are available.
对于部署完整监控解决方案的成本考虑且开发技能可用的开发和测试环境来说，这是一个适当的解决方案。
The supporting corporate configuration management backbone becomes the vehicle for a software delivery chain, staging deliverables into solution integration, test, and delivery.
支持的公司配置管理中枢成为软件交付链的运载体，将可交付件分阶段为解决方案集成、测试和交付。
This validation process enables you to test your solution against a set of pre-established criteria and demonstrate that your application integrates smoothly with IBM hardware and middleware.
这一验证过程使你能够测试你的解决方案是否符合一组事先建立的标准并展示你的应用程序与IBM中间件和硬件的平稳集成。
Different configured test cases in each solution may test the same area or component of the product.
每个解决方案中的不同配置的测试用例可能测试这个产品相同的区域或者组件。
Different configured test cases in each solution may test the same area or component of the product.
每个解决方案中的不同配置的测试用例可能测试这个产品相同的区域或者组件。
应用推荐