The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of …
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The examples of utilizing the comparison method and analogy method in the Principle of Microcomputer teaching are introduced.
阐述了在微机原理教学中运用比喻法、类比法例子，指出了运用此教学方法的原则及其价值与意义。
This paper introduces the principle of microcomputer based post matter separation system and its hardware and software design.
本文介绍了微机邮件分拣系统的工作原理和硬件与软件的设计。
The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of control system, and main...
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The principle of microcomputer-based temperature and level control system is given and its operational experience in management and maintenance is introduced.
叙述锅炉温度、水位微机自动控制系统的原理及系统在管理维护方面的运行经验。
This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
Brief introduction: This course shows the introductions to functional structure, principle, instructions, assemble language programming, interface and application of MCS-51single chip microcomputer.
课程简介：本课程介绍MCS -51单片机的功能结构、工作原理、指令系统、编程技术、接口技术和实际应用。
The operational principle and the design of hardware circuit and software of a simple and practical microcomputer interfacing circuit for flow detecting are introduced.
介绍一种简单实用的流量检测微机接口模板的工作原理、硬件电路及软件设计。
The Configulation and principle of a newly developed microcomputer controlled ignition system are presented.
本文介绍一种新研制的微机控制点火系统的构成和工作原理。
The control principle and software of the microcomputer controller used in DC impulse seam welding are introduced in this paper.
本文介绍了直流冲击波缝焊微机控制器的控制原理及软件系统。
In this paper, the architecture and working principle of a microcomputer control system called JDWL for railway interlocking are introduced.
研究了车站微机联锁控制系统的结构、工作原理、安全性可靠性设计及其特点。
The structure and the principle of auto board shears have been introduced with the design method of hardware and software implemented by 8051 single chip microcomputer.
介绍了自动剪板机系统的结构组成和工作原理，叙述了8051单片微机实现其生产过程控制的硬件与软件的设计方法。
The controlling principle of thyristor control linear reactor of TCR in the reactive power dynamic compensator of microcomputer was expounded, and establishment of its mathematics model was discussed.
阐述了微机无功动态补偿器中tcr晶闸管控制线性电抗器的控制原理，并对其数学模型的建立进行了讨论。
The function and principle of the railway signal microcomputer interlock equipment are briefly introduced.
介绍了铁路信号微机联锁系统的作用、原理。
The experimental principle and the method to measure the normal spectral emittance of materials by infrared spectrophotometer and microcomputer system are presented.
本文报道利用红外分光光度计和微机系统，采用二次测量技术，测量材料表面法向光谱发射率的基本原理和测试方法。
The basic principle of microcomputer controlled nitriding and its contrast tests with traditional process are introduced briefly.
介绍了微机可控渗氮的基本原理，进行了气体渗氮的传统工艺与微机气体渗氮工艺的对比试验。
This paper introduces the general structure, operation principle and application effect of the dual microcomputer regulator of the governor of Ertan Hydropower Station.
介绍了二滩水电站调速器的总体结构、微机调节器的工作原理和应用效果。
In this paper, using a new principle of PWM and the teehnique of storage system in a microcomputer are deseribed, and a 25Hz sinusidal bell current source has been developed.
本文介绍了采用新的脉宽调制原理和微电脑技术，研制出的25赫正弦波铃流源。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
Taking the FORTH which we have researched and developed in a microcomputer as a real example, this paper introduces the structure and working principle of FORTH system.
本文仅以我们在微型机上所研制的FORTH语言为实例介绍了FORTH系统的结构和工作原理。
In this paper, we have introduced the structure and operation principle of CCD Transducer System in the measurement yarn diameter. The test Circuit and Microcomputer COntrol is given.
纱线直径是检测纱线质量的一个重要参数。本文介绍了应用CCD传感器组成测量纱线直径的测试系统的结构、工作原理、检测电路系统及微机系统。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
In this paper the principle and design of a microcomputer-controlled PLL frequency synthesis digit tuning system is discussed.
本文叙述了一个用微机控制的锁相环频率合成数字调谐系统的原理和设计。
The article introduces the circuit and principle of a new type of coin box controlled by chip microcomputer.
主要介绍了一种由单片机控制的新型投币电话机的电路及工作原理。
The paper describes the principle and ways of calculating running speed and running time of trains with resistance control braking by microcomputer.
本文阐述了应用微型计算机计算列车在施行电阻调速制动时，运行速度和运行时间的计算原理和方法。
The principle, functions, hardware and software structures and characteristics of the microcomputer test system in single cylinder diesel engine test stand were stated.
文章阐述了单缸柴油机试验台微机测试系统的测试原理和功能、系统的硬件和软件结构以及测试系统的特性。
The hardware configuration and the software flowchart of the system are given, and the design principle for adding signals by the monolithic microcomputer discussed.
文中给出了系统硬件构成以及软件的程序框图，讨论了单片机控制产生添加信号的设计原理。
This paper introduces the principle of miner set position detecting with single chip microcomputer and its circuit.
本文介绍了采煤机机组位置单片机检测的基本原理、电路的组成。
This paper introduces the design principle and features of an automatic measuring and sorting system for spring rigidity based on 8031 single-chip microcomputer.
介绍一个由8031单片机等组成的弹簧刚度自动测试及分选系统的设计原理与特点。
This paper describes the principle, derivation of the engineering formula, software functions and characteristics of a microcomputer controlled dynamic length measuring device for red-hot steel plate.
本文叙述了微机控制的红热钢板动态测长仪的原理、工程公式的导出、软件功能及其特点。
应用推荐