The effectiveness of Airliner as a thermal barrier is due to its unique patented construction.
该客机作为隔热效果是由于其独特的专利建设。
Gradient thermal barrier coatings, a new type heat resisting material, can sufficiently release heat stresses.
梯度热障涂层是一种新型耐热材料，可充分缓和热应力。
The results show that the graded thermal barrier coatings have typical lamellar structure. The coatings are compact.
结果表明：梯度涂层呈典型的层状结构，涂层较为致密，空隙均匀，同时分布有各向的微裂纹。
The result shows that the residual stress in thermal barrier coatings is a function of interface topography parameters.
模拟结果表明，热障涂层中的残余应力是界面形貌尺寸的函数。
Knurling machine is the key equipment to increase shearing force of the combined profiles of thermal barrier strips and aluminum alloy.
开齿机是提高隔热条与铝合金组合型材剪切力的关键设备。
The outer garment should serve as thermal barrier as well as a wind block, since cycling through cold air increases the wind chill factor.
外衣应作为热障以及风块，由于通过冷空气循环，增加风寒因素。
With the elevation of inlet working temperature of gas turbine engine, thermal barrier coatings (TBCs)are receiving a great deal of attention.
前言：随着燃气涡轮发动机进口工作温度的提高，热障涂层技术受到了广泛的关注。
The thermal shock resistance of plasma-sprayed ZrO2 thermal barrier coatings under the conditions of water quenching and flame jet was studied.
研究了涂层在水淬和火焰喷烧两种条件下的抗热震性能。
The residual stress fields of thermal barrier ceramic coating were measured for every twenty thermal cycles by using micro-Raman spectroscopy technique.
再应用微拉曼光谱法测量了热障涂层样品内残余应力场大小，并分析了试样尺寸、热处理温度和陶瓷涂层厚度对残余应力的影响。
Its unique thermal barrier design keeps moisture from infiltrating your insulated system while preventing thermal energy loss through exposed metal handles.
独特的热障结构设计阻止水分渗透到保温系统中，防止热能从暴露的金属手柄上流失。
The plasma spraying technique was used to prepare a set of thermal barrier coating specimens, and water-cooling method was used in thermal shock experiments.
用等离子喷涂方法在合金圆柱体上制备了热障涂层，并用水冷的方法进行了热冲击实验，试样的失效现象为轴向的开裂和剥落。
The composite thermal barrier coating is useful on combustion turbine components such as ring seal segments, vane segment shrouds, transitions and combustors.
复合热障涂层是有用的燃气轮机部件，如密封环段，叶片部分罩，转换和燃烧室。
Gas hot-corrosion resistance of nanostructure and segmentation thermal barrier coatings on DZ40M superalloy[J]. Journal of Materials Engineering, 2014, (5):66-72.
DZ40M合金表面纳米和垂直裂纹结构热障涂层的抗燃气热腐蚀性能[J]。材料工程，2014，（5）：66-72。
Its unique thermal barrier design keeps moisture from forming and infiltrating your insulated system while preventing thermal energy loss through exposed metal handles.
其独特的热障结构避免潮气的形成和渗透到保温系统中，避免通过暴露的金属手柄损失的热量。
Thermal barrier coating(TBC) is a kind of high temperature protection coating. Because of its wide application, it has attracted more and more interests in recent years.
热障涂层是一类高温防护涂层，由于其应用的广泛性，已成为近年来涂层研究领域的热点之一。
A composite thermal barrier coating system includes a honeycomb metallic structure filled with high thermal expansion ceramic hollow spheres in a phosphate bonded matrix.
复合热障涂层系统包括蜂窝金属结构具有高的热膨胀磷酸盐保税基陶瓷空心球填补。
Features: the strips will not be worn during insertion, and each finished bridge-cut-off thermal barrier profiles feature consistent shearing force at the head, middle and end.
特点：穿条时胶条不容易磨损，使每条成品断桥隔热型材头、中、尾、剪切力稳定。
The hydraulic section consists of the inlet and outlet nozzles, casing, flange, impeller, diffuser, pump shaft, pump bearing, thermal barrier and thermal barrier heat exchanger.
水力部件由以下组成：出入口管，壳体，法兰，叶轮，导叶，泵轴，泵轴承，热屏和热屏热交换器。
One of the important applications of FGMs is the functionally graded thermal barrier coating(TBC), which may markedly improve the durability compared with those conventional ones.
梯度功能热障涂层是FGM的重要应用之一，它与传统的热障涂层相比可明显提高耐久性。
The composite thermal barrier coating system may be manufactured to thicknesses in excess of current thermal barrier coating systems, thereby imparting greater thermal protection.
复合热障涂层系统的制造，可在目前的热障涂层厚度超过系统，从而提高热保护传授。
The methods of physical testing and chemical analysis are introduced for quality inspection on thermal barrier coats of the high temperature parts used in gas turbine power station.
采用理化分析方法对电站燃气轮机高温部件热障涂层的喷涂修复质量进行了检测和评定。
Thermal barrier coating (TBC) has been used widely in heat components, the residual stress concentrated by thermal load can lead to spalling or failure for the entire coating system.
广泛应用于高温部件的热障涂层，在热载荷作用下各层间所集聚的残余应力是导致其层裂和失效的重要原因。
The test results show that retardation of thermal shock crack initiation and propagation and higher thermal shock resistance property were displayed in graded thermal barrier coating.
实验结果表明，梯度热障涂层能明显延缓热震裂纹的形成和扩展，具有较高的抗热震性。
In a word, the thesis gives a detailed study of high temperature oxidation of thermal barrier coatings from thermodynamics, diffusion, oxidation kinetics and mechanochemistry activity.
总而言之，本文从热力学、扩散、氧化动力学和力学化学活度四个方面对热障涂层的高温氧化机理作了一个较为详细的论述。
The performance valuation and analysis was reviewed to the mechanics property, oxidation resistance, hot corrosion resistance, erosion resistance, and thermal property of thermal barrier coatings.
文中对热障涂层的力学性能、抗氧化和抗热腐蚀、抗磨蚀和热学特性等性能的评价及性能判断与分析进行了综合回顾。
Titanium nitride coating has great application in industry owing to its superior properties, such as good wear and corrosion resistance, low friction coefficient and good thermal barrier properties.
氮化钛涂层因具有良好的耐蚀性、耐磨性及低的摩擦系数在工业上得到广泛应用。
High thermal temperatures are a key barrier in the development of next-generation military electronics, such as high-power radars, electromagnetic weapons and all-electric aircraft.
高温是开发下一代军用电子器件，例如高功率雷达、电磁武器和所有的电动飞行器，遇到的关键障碍。
High thermal temperatures are a key barrier in the development of next-generation military electronics, such as high-power radars, electromagnetic weapons and all-electric aircraft.
高温是开发下一代军用电子器件，例如高功率雷达、电磁武器和所有的电动飞行器，遇到的关键障碍。
应用推荐