Checkhigh/low speed thrust bearing axial float clearances.
检查高/低速轴向推力轴承浮动许可。
Double-direction Thrust Bearing used in machine tool spindle.
双向推力轴承在机床主轴使用。
Thrust bearing adopts self pump outer circulation cooling system.
推力轴承采用自身泵外循环冷却系统。
Thrust disc is made of steel and thrust bearing bushing surface is made of plastic bushing.
推力盘为钢制材料制成，推力轴承瓦面为塑料瓦材料制成。
The aerostatic guide way is a sort of thrust bearing, and is applied to linear air guide way widely.
空气静压导轨是空气静压止推轴承的一种，在直线气浮导轨中被广泛采用。
With an additional axial thrust bearing, both the thrust and radial bearings are preloaded individually.
由于增加了一套轴向止推轴承，所有的推力和向心轴承均被分别预加载。
In this paper, the design of a load sensor for measuring the pads loaded in thrust bearing is described.
本文通过为测量推力轴承各轴瓦的受力而研制的荷重传感器。
There are two bi-directional thrust bearing rolling bodies, each listed in only one direction of axial load.
有两列滚动体的双向推力滚动轴承，每列只在一个方向承受轴向负荷。
Introduced the optimized parameter of the multi screw and the design technique progress of thrust bearing system.
并对多螺杆的参数优化以及推力轴承系统的设计技术进展进行了介绍。
Residual oil can be drained via valve at the rear of gear reducer and oil drain valve in thrust bearing oil sump.
残油的排放可由减速机尾部的阀门和推力轴承油池的放油阀门来进行。
The thrust bearing of Geheyan hydroelectric power station is supported by many small springs, babbitt thrust pads.
隔河岩水电站推力轴承为小弹簧多点支撑结构，钨金瓦面。
The present invention disclosed a vehicular torque converter and method for checking assembly of thrust bearing thereof.
本发明公开了一种车辆用变矩器以及检查其止推轴承的装配的方法。
The invention provides a horizontal shaft type rotary machine capable of simply feeding oil into thrust bearing devices.
本发明提供一种能够简易地进行向推力轴承装置的供油的横轴式旋转机。
The shaft is provided with a micrometer adjustment at the thrust bearing to permit proper centering of impeller in casing.
传动轴在止推轴承处带有千分尺调节器，以使壳内叶轮处于中心位置。
Production and application of thrust bearing, and guide bearing made of filled PTFE in submarine motor pump are introduced.
介绍了潜水泵中止推轴承与导向轴承用填充聚四氟乙烯材料进行的生产和应用。
The structure feature and main testing results of thrust bearing with double-disk supporting babbit pads is presented in this paper.
介绍双托盘支承钨金瓦推力轴承的结构特点及其主要试验结果。
With excellent performances, the elastic metal-plastic pads are widely used in the thrust bearing of the water turbine generator sets.
弹性金属塑料瓦以其独特的性能，在水轮发电机组推力轴承上得到广泛应用。
Burning accident can be resulted from non uniform pressure on the thrust bearing pad due to under performance of installation and equipment.
如果安装质量和设备缺陷引起推力瓦在运行中受力不均，会导致推力瓦烧损。
The research of the axial hydro-thrust for hydraulic turbine is very important to the running of hydropower plant and the design of thrust bearing.
水力机组的轴向水推力研究对电站的稳定性、可靠性以及推力轴承的合理设计具有重要意义。
Other design methods were also presented, such as the face seal at inlet, axial thrust bearing, and its effect to pump efficiency was also discussed.
同时进行了进口端面密封设计、推力轴承设计以及对水泵效率影响的讨论。
The finite method of EHLwas used to analyze the properties of sector pad and circular pad thrust bearing separately on the condition of centre pivoted.
应用有限元程序分别对圆形瓦和扇形瓦推力轴承在中心支承条件下的性能进行了计算。
During the operation of thrust bearing shoe, served as an index of malfunction, oil temperature is more effective than thrust bearing shoe temperature.
在推力瓦的运行中，油温反映故障比瓦温更有效。
The performance analysis and structural design of foil hydrodynamic thrust bearing has been studied on the basis of the numerical method and procedures.
根据提出的数值计算方法和程序，重点研究了轴向箔片气动轴承的性能分析和结构设计。
Usually, tungsten bush is used to be the thrust bearing in water power plant, but it is easy burned down since its high temperature during its operation.
水电厂的推力轴瓦，已往多采用钨金瓦，它在运行中温度偏高，容易发生烧瓦事故。
Since the gear reducer is working with load, attention shall be paid to the temperature increase of axial cone bearing and sliding thrust bearing oil sump.
因为减速机此时已经是带负荷运转，所以应特别注意输入轴锥轴承的温升和滑动推力轴承油池的温升有无异常现象等。
This paper presents a method for calculating heat conduction and thermo-elastic deformation of double-disk supported thrust bearing by means of ANSYS program.
介绍了ANSYS软件用于水轮发电机双托盘支撑推力轴承的热传导和热弹变形计算的方法。
A new gas-magnetic dynamic pressure thrust bearing which has a compact structure, large carrying capacity and wide application prospect is proposed in the paper.
本文提出了一种结构紧凑、承载能力大、应用前景广的新型气磁复合动压止推轴承。
The cage which retains the cylindrical rollers of the cylindrical roller thrust bearing is an injection moulded glass fibre reinforced polyamide 6, 6 cage (FIG 6).
保持圆柱滚子推力轴承圆柱滚子的保持架，是注射成型的玻璃纤维增强聚酰胺6.6保持架(图6)。
That the temperature of thrust bearing pad exceeds the alarm temperature designed for unit No. 1 at Yele Hydropower Plant impedes the normal operation of the unit.
冶勒水电站1号机组在试运行过程中推力轴承瓦温超过设计的报警温度，无法继续运行。
In this paper, an oil film thickness VXI measuring system of the thrust bearing test has been applied to set up a new kind of optical fiber reflective sensor mod el.
本文建立了一种新型的反射式光纤位移传感器的数学模型，并将其用于推力轴承试验中测量油膜厚度的VXI测试系统中。
应用推荐