• The south Qinling has formed an imbricated thrust fault at low angle from the north to the south.

    秦岭北向南产生角度叠瓦状逆冲断裂

    youdao

  • The tear fault intersected with low angle normal fault or thrust fault can form some traps, e. g. trap-door structure trap.

    撕裂断层角度正断层逆冲断层相交时常形成有利圈闭活板构造等。

    youdao

  • It was considered that method of equilibrium profile is the best method to recognize and quantitatively study active thrust fault and underlying fault.

    平衡剖面乃是识别定量研究活动断层特别是隐伏断层最好方法

    youdao

  • The trend of the high anomaly in south west area of the study region is basically same with the thrust fault, so we infer that the anomaly is caused by it.

    研究区内西南部区域异常剖面图上其走向冲推覆构造走向基本一致推测异常逆冲构造引起,也可能是盖层中侵入岩引起。

    youdao

  • The Changpo reverse anticline controls the location of Changpo-Tongkeng deposit, while the bed-parallel shear fracture zone and thrust fault control the ore bodies.

    坡倒转背斜控制长坡-钢坑矿床产出,层间剪切破碎掩断层控制着矿体空闻位置

    youdao

  • Structural characteristics of inversion structure, fold association style, thrust fault zone upright strata developed belt shown in great profiles were also discussed.

    剖面反映的构造反转、褶皱组合样式逆冲断裂带直立地层发育构造特征进行了探讨。

    youdao

  • There is a normal deposition sequence stratigraphy beneath the lower wall of over-thrust fault, such as Jurassic, Triassic, Permian-Carboniferous, Cambrian-Ordovician system.

    逆冲断裂下盘正常沉积层的地层,分别侏罗系三叠系、石炭—二叠系、寒—奥陶系地层。

    youdao

  • The stress fields are compression ones, in that conditions, the structure styles are folds, Fault-bend folds, Fault-Propagation folds, Detachment folds, imbrications-thrust faults and so on.

    研究构造应力场主要为挤压应力场,区内主要形成褶皱、断弯褶皱、断展褶皱、叠瓦逆冲构造、冲起构造逆冲三角构造构造样式

    youdao

  • The Luochen Copper Mine is situated at the composite part of the protruding south front of the large scale thrust( slip) nappe and the NNE-trend strike-slip thrust fault in the south edge of Jiuling.

    罗城矿区处于九岭南缘大型覆构造突出前锋NNE向走滑冲断带复合部位

    youdao

  • The most efficient structural assemblage zone for gas accumulation is the thrust fault and nappe thrust belt developed in a variety of salt-related due to tectonic compression and salt flexible fluid.

    根据其它气田构造对比,穿断裂叠瓦冲断构造组合样式油气聚集最为有利

    youdao

  • The suprasalt structure includes suprasalt rolling anticline, fault-bending anticline, suprasalt pop-up, thrust screened structure and salt nappe.

    构造包括盐上滚动背斜、断弯-断展背斜、背冲断块、逆冲断层遮挡构造推覆构造等

    youdao

  • First, an expert system of fault diagnosis is set up by summarizing symptoms and their direct reasons for axial displacement fault and by combining them to the tilting pad thrust bearing performance.

    首先总结了位移故障特征导致故障的直接原因它们和可止推轴承的性能相结合,组成故障诊断专家系统

    youdao

  • The structural system of nappe consists of several overthrust fracture belts, thrust sheets and thrust slices, and master fault and secondary fault form an imbricate structure.

    构造体系冲断裂带及其冲席、组成主干断层次级断层组成叠瓦式构造。

    youdao

  • Then, the regional structure characteristics and distribution pattern are analyzed and the importance of thrust nappe fault is emphasized especially.

    然后分析区域构造特征展布格局特别强调逆冲推覆断裂重要性

    youdao

  • The structural style found in the basin includes imbricated thrust zone, trapdoor structure, drag fold, listric fault, rollover anticline, horst-graben structure and the like.

    盆地发育多种构造样式主要有瓦状断层、滚板构造牵引褶皱形正断层、滚动背斜、“垒一”构造

    youdao

  • The Xiluodu Hydropower Station on the Jinsha River is a giant hydropower station, but a thrust nappe structure-Majiahe Dam fault-lies in the reservoir head region.

    金沙江溪洛渡水电站巨型水电站,首区发育一冲推覆构造——马家河坝断层

    youdao

  • This paper considers that Aerjin Mountain strike-slip fault structure is a huge tectonic zone with the property of left active anticlockwise and thrust nappes and ductile shear zone.

    该文认为阿尔金山断裂构造巨型行左列走滑断裂兼冲推覆韧性剪切性质断裂构造

    youdao

  • Wuxia fault belt in the eastern part of northwestern margin of Junggar basin is an important part in the thrust belt of the northwestern margin.

    乌夏断裂带位于准噶尔盆地西北缘东部西北缘冲断一个重要组成部分

    youdao

  • Fault-bend folds and fault-propagation folds are typical structural styles in the foreland thrust belts.

    断弯褶皱断展褶皱陆冲断带中的两种典型构造形式

    youdao

  • The main thrust-slip fault belts and the nappe structure zones, thrust sheets and low strain regions lying in between the main thrust-slip fault belts are described in detail.

    主干断裂带及其的逆冲推覆、逆冲席应变区的特征进行了详细描述。

    youdao

  • Taking thrust slip fault of Japanese MITSUBISHI electric regenerative cargo lifting in some certain vessel as example, this paper gives analysis and ideas on the fault causes and repair methods.

    日本三菱电动回转式起货机冲故障分析故障原因修理方法,阐述了若干体会。

    youdao

  • The MCT1 was originally a south-vergent ductile thrust, which was later transformed into a normal fault after it underwent NNE-trending folding.

    MCT1原为向南逆冲的韧性断层遭受北北东向褶皱作用转变为正断层。

    youdao

  • Mingqiao Oil-field is a fault block &fault nose reservoir which is formed on the condition of complex fault-thrust anticline structure.

    闵桥油田断层复杂化构造背景形成的断、断油藏

    youdao

  • The key structure in this area is a duplex that comprises of a shallow fault-bend fold of the Late Triassic and a deep blind stacking anticline imbricated by three thrust sheets of Cenozoic age.

    矿山梁构造几何学上表现个双重构造:浅层是一个世形成断层转折褶皱深层则是在新生代形成三个冲岩叠置所构成的隐伏堆垛背斜构造。

    youdao

  • Since the Miocene, the fold in the Shuanghe group (N1s) stroke in NE when the main fault on the basin rim changed into sinistral thrust.

    中新以来,双河N1s)地层的褶皱走向NE向,此期间断裂变为左旋逆推性质;

    youdao

  • Since the Miocene, the fold in the Shuanghe group (N1s) stroke in NE when the main fault on the basin rim changed into sinistral thrust.

    中新以来,双河N1s)地层的褶皱走向NE向,此期间断裂变为左旋逆推性质;

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定