This can lead to the formation of tin whiskers erupting out of the tin coating.
这将导致形成刺出锡涂层的锡晶须。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
With the view of the application in factory, the process of tin decorative coating coated by magnetron sputtering coater is emphatically discussed in this paper.
本文从工厂应用的角度着重讨论磁控溅射镀膜机镀氮化钛装饰膜的工艺问题。
A new method was developed to measure the mechanical properties of tin coating once through improving traditional composite model.
文中通过对传统的复合板模型进行改进，提出一种能同时测试涂层多个力学性能参数的方法。
To whiten (a metal) by soaking in acid or by coating with tin.
在…上镀锡把(金属)浸在酸中或镀锡，使之变白。
Tin-zinc alloy deposit is anodic coating to iron and steel.
锡锌合金镀层相对于钢铁基体为阳极性镀层。
The effects of temperature and retaining time in mild melt treatment on the bonding strength, surface morphology and porosity of tin coating are studied.
研究了软熔处理温度与保温时间对锡镀层的镀层结合力、镀层表面形貌和孔隙率的影响。
It is also equipped with tin spraying, anti - oxidizing coating, and gold, tin and silver emulsion processing capabilities. construction works are expected to complete in 12 months.
此外，第二期厂房设备亦可处理喷锡抗氧化涂布沉金全板镀金沉锡及沉银等表面处理工序。
Zinc coating was prepared using mechanical plating technology for the deposition of small amount tin salt.
采用少锡盐沉积机械镀锌工艺制备了机械镀锌的镀层。
Black tin coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.
介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Note: We can manufacture the products upon special requirements of clients, and thickness, rigidity of copper matrix and tin coating thickness can also be adjusted upon the requirements of clients.
备注：其它规格可以按客户特殊要求加工定做，铜基厚度、铜基硬度和锡层厚度可以按用户要求调整。
The printing and coating process on tin plate and aluminium plate cans were described.
简述了马口铁罐和铝质罐的印刷涂装工艺。
A new technology of tin-nickel alloy electroplating from a pyrophosphating bath was studied. The effect of some plating parameters on the tin-nickel alloy coating was discussed.
研究了从焦磷酸盐槽液中电镀锡镍合金的一种新工艺，讨论了一些电镀参数对锡镍合金镀层的影响。
Objective: To evaluate the influence of air oxidation, anodizing and tin coating sample on elemental composition and thickness of surface film of cast pure titanium.
目的：评价大气热氧化、阳极氧化和氮化钛镀膜对铸造纯钛表面膜组成和厚度的影响。
The variation of the surface morphology of the tin coating with time and temperature is also studied.
结果表明，随着时间延长，温度上升，镀锡层表面晶粒不断增大，粗糙程度也随之增加。
The character of the tin-cobalt alloy coating, properties of the bath, influence of the impurities in the bath, troubleshooting and wastewater treatment are also studied.
研究了锡钴合金镀层的基本特性、镀液的性能、镀液中杂质的影响及故障处理和废水治理。
The results indicate that good coating quality tin coated flake Cu powder with well electric conductivity and loose specific gravity can be obtained by controlling technological parameters.
结果表明：通过控制工艺参数可以获得镀覆质量好，且具有很好导电性和低松装密度的片状锡包铜粉产品。
It is an inevitable tendency to reduce the thickness of tin coating and alloy layer of tinplate.
减薄镀锡板的镀锡层和合金层的厚度成为目前镀锡板生产的趋势。
The instrument for automatically determinig tin coating weight of tinplate hasbeen developed.
根据电解剥离原理，研制出马口铁镀锡量自动测量仪。
Results indicated that wear resistance and corrosion resistance of black TiN coating were higher than that of black oxide film or phosphatizing films.
结果表明，其耐磨损、耐腐蚀性能均高于氧化和磷化黑色膜层。
Solar photovoltaic welding tin-plate machine after manyimprovements, overcome the tin slag in the process of production, not shinysurface, uneven coating, defects such as copper.
太阳能光伏焊带涂锡机经过多次的改良，克服了生产过程中锡渣多，表面不光亮，镀层不均匀，露铜等缺陷。
As electronics manufacture seek to make electronic interconnectio lead-free, many are looking at pure tin soldering and coating as an economical alternative to traditional tin-lead alloys.
随着电子产品制造寻求使电子互连无铅很多人都在找纯锡焊和涂层作为一个经济的替代传统的锡铅合金。
According to the theory of solid physics from metal micro - structure and compression strength of tin-coating grain, a study is carried out in this essay on mechanism of parts stained with black dust.
根据固体物理中金属的微观结构、镀锡晶粒的抗压强度理论，分析了黑色粉末产生的机理。
In this paper, the analysis of tin and nickel content in rifle colour coating with EDTA complex titrimetry is introudced.
用EDTA络合滴定法分析枪色镀层中锡和镍的含量。
Tin coating for steel a tin coating for Yin polarity coating.
锡镀层锡镀层对钢铁件为阴极性镀层。
To study the effect of surface treatment such as titanium nitrogen(TiN) coating and gold-plating on corrosion resistant of Ni-Cr alloy and Ni-Cr Alloy With Titanium.
提出银件镀金、镀铑工艺流程和配方，介绍了金合金镀金工艺、镀前处理、操作要点，强调中间镀层能有效防止银基体的腐蚀和镀件变色。
The method of using the standard sample of low alloy steel instead of tin free steel reference sample by direct reading spectrometry was used to determine chromium coating weight.
本文提出了以低合金钢标准样品代替无锡薄钢板参比样品，利用直读光谱仪测定无锡薄钢板镀铬量的方法。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
The effective factors on the vaporization rates of titanium and the effect of N2-pressure on TiN-coating are studied in the paper.
本文主要研究钛蒸发速率的影响因素和氮分压对涂层的影响。
The effective factors on the vaporization rates of titanium and the effect of N2-pressure on TiN-coating are studied in the paper.
本文主要研究钛蒸发速率的影响因素和氮分压对涂层的影响。
应用推荐