For the bearings under axial force and torque load in the same time, the static axial loading - torque figure is drawn.
在轴承承受力矩和轴向力联合载荷的情况下,给出静轴向载荷—力矩图。
As a result, it is possible to prevent and protect the damage or fold of the honing tool (1) due to the excessive torque load.
由此,能够有效地防止和保护珩磨工具(1)不受因过度的转矩负荷而导致的损伤、折损等。
Spindle's function is to support the impeller, transmit the torque load to the gear box and other loads to the base and other supporting structures.
主轴的功能是支撑叶轮,将扭矩载荷传递给齿轮箱,而将其它载荷传递给底座等支撑结构。
A simple strategy for overcoming the difficulties can be developed, with a small input torque load, where one of the meshing gears can be modelled with rigid elements.
为了克服困难,一个简单的策略能够被采纳,这个策略就是在带有一个很小的输入扭矩负载下,在加载的地方其中的一个啮合齿轮的可以被建成有刚性的元件的模型。
It is an important half hardware-in-loop simulation equipment, which is often used to simulate the aerodynamic torque load on the missile rudder or elevon actuators in the flight.
它是地面半实物仿真系统中的一种重要专用设备,用来模拟飞行器舵机在飞行过程中所承受空气动力力矩载荷。
The fuel-camion redeployer in the coal-fired power plant has the characteristics of the high-inertia, the large-torque load startup, the multi-motor synchronic drive running etc.
在分析火电厂燃料重调机运行特性的基础上,采用变频控制技术对传统的运行方式进行改造,解决了高惯量、大转矩负载启动,多台电机同步驱动运行等问题。
Secondly, considering that, compensation methods upwards mostly are researched with an eye to torque load system, and displacement servo system always is ignored, so big limit exists.
其次,考虑到以上补偿方法大多都只着眼于力矩加载系统,而忽视了位置伺服系统,因而存在很大的局限性。
The test program will operate the permanent magnet propulsion motor up to full power (full torque and full load) in a test facility that simulates an actual U.S.Navy DDG-1000 engine room.
测试程序将在一个美海军仿真实际DDG- 1000引擎室的测试设施中操作永磁推进马达至全功率(全扭矩和全负载)。
The test program will operate the permanent magnet propulsion motor up to full power (full torque and full load) in a test facility that simulates an actual U.S. Navy DDG-1000 engine room.
测试程序将在一个美海军仿真实际DDG- 1000引擎室的测试设施中操作永磁推进马达至全功率(全扭矩和全负载)。
We adopt vector control function with LG inverter, can make the motor in the low speed can also provide meet the need of the load torque.
我们采用具有矢量控制功能的LG变频器,可使电机在低速时也能提供满足负载需要的转矩。
Pump is the drainage and back into the groove of reasonable design, is a gear in the work under the minimum torque force, so the bearing load is small, wear small, pump with high efficiency.
输送皂角泵内有设计合理的泄油和回油槽,是齿轮在工作中承受的扭矩力最小,因此轴承负荷小,磨损小,泵效率高。
The armature voltage and external load torque are inputs to the system.
电枢电压和外负载转矩是系统的输入。
In order to have a reliable operation, must reduce the speed fluctuation, namely must effectively restrain the load torque ripple and motor electromagnetic torque ripple of speed fluctuation bring.
为了可靠运行,必须降低转速的波动,即必须有效抑制负载转矩脉动和电机电磁转矩脉动带来的转速波动。
The motor is characterized by reliability, small step-angle, high holding torque, strong ability of driving high rotor inertia load and super structural manufacturability.
其突出的优点是步距角小、驱动惯性负载能力强、自定位力矩大、可靠性高、结构工艺性好。
And then the power of servo motor is calculated according to crank press working load, kinematical characteristic, torque and rotational momentum.
以变速驱动压力机的工作负荷、运动特点、工作总功、力矩和角动量为基础,计算其驱动电动机所需的功率。
On this basis, back electromotive force without load and with load is researched, simulated and analyzed, and cogging torque is analyzed and calculated in different dimensions of magnetic steel.
在此基础上,仿真了空载和负载下的电机反电动势,并且对不同磁钢尺寸下的定位力矩进行了分析计算。
At the same time, the automatic energy-saving mode frequency converter LG, can make the motor in the meet load torque requirements to minimum current operation, to reach better energy saving effect.
同时,LG变频器的自动节能模式,可使电机在满足负载转矩要求下以最小电流运行,达到更好的节电效果。
This paper mainly focuses on the fluctuation of velocity and torque of the electromotor because of the variational load in the pumping unit equipment.
摘要抽油机中载荷变化大,易引起电动机转速和转矩的波动。
Plots the torque speed curve and power curves for given values of stall torque and no load speed.
绘制给定失速扭矩和空载速度时的力矩曲线和功率曲线,不含负荷转速。
Generally applies to capsize under tremendous torque and rotational movement relative to the mechanical equipment, is a kind of efficient, high load-bearing capacity bearings.
一般适用于承受巨大倾覆力矩并作相对旋转运动的机械设备,是一种具有高效、高承载能力的组合轴承。
It is discusses here, how to control the rotating torque of the magnetic brake, as the load on micromotor tested by microcomputer.
介绍微电机微型计算机测试中如何控制作为负载的磁粉离合器的转矩问题。
In this paper a new method for Direct Torque control (DTC) based on load Angle control is developed.
介绍了一种基于负载角控制的直接转矩控制(DTC)新方法。
The state observer observes the precise load torque, rotor position and speed with only a low accuracy position sensor.
状态观测器可以利用较低精度的位置传感器来准确观测负载转矩、转子位置和转速。
The test program will operate the permanent magnet propulsion motor up to full power (full torque and full load) in a test facility that simulates an actual U. S. Navy DDG-1000 engine room.
测试程序将在一个美海军仿真实际DDG-1000引擎室的测试设施中操作永磁推进马达至全功率(全扭矩和全负载)。
Safe load capacity, strengths and application limits of accessories and components of the EZY-torque must be carefully verified.
液压锚头的部件、配件的安全载荷、强度和适用范围,必须认真核实。
YRT series cylindrical roller and thrust needle roller combined bearings, with high rotation accuracy, can support heavier radial loads, double direction axial load and inclined torque, etc.
圆柱滚子和推力滚针组合轴承yrt系列具有旋转精度高、可承受较大的径向载荷和双向轴向载荷以及大的倾覆力矩等特点。
The performances of the motor with constant and fan-type load torque are computed.
分别计算了电机带恒转矩负载和风机类负载时的运行状况。
This paper presents the construction and drive system designs and operating load torque calculation for a caterpillar trailer fixed on table with VVVF s drive system.
介绍了新型台式变频履带牵引机的结构设计、工作负载转矩计算及拖动系统设计。
The relations between load torque and overload current, load torque and staring time, load torque and current of phase failure are given.
得出了负载转矩与电流过载倍数、负载转矩与启动时间、负载转矩与断相电流的关系曲线。
The relations between load torque and overload current, load torque and staring time, load torque and current of phase failure are given.
得出了负载转矩与电流过载倍数、负载转矩与启动时间、负载转矩与断相电流的关系曲线。
应用推荐