Remanufacturing test on a torsion bar shows that the system is feasible.
对某车辆的扭力轴进行了试验验证，结果表明该系统是可行的。
The fatigue failure has been considered as torsion bar spring are subject to periodic forces.
由于扭杆受到的是循环应力，因此设计时考虑了疲劳失效问题；
The side-rolling resistant torsion bar made of this steel exhibits high fatigue life span and elastic limit.
采用该材料制造的抗侧滚扭杆具有高的疲劳寿命和高的弹性极限。
The compact torsion bar suspension is one of important suspension structure types applied in popular passenger cars.
紧凑型扭杆弹簧悬架是普及型轿车中采用的一种主要的悬架结构形式。
Oxygen content is the most important metallurgical factor that affects the materials properties of torsion bar in the looms.
冶金质量影响纺织机扭轴材料的性能，而其中氧含量是不可忽视的因素。
The torsion bar has a first end for connection to the drive sprocket and a second end fixedly attached to the inner end of the center bore.
该扭力杆有用于连接该主动链轮的一个第一端以及附着在中心孔的内部末端的一个第二端。
This paper analyzes the influence of anti-rolling torsion bar to the vehicle dynamic envelope in metro gauges and the gap between vehicle and platform.
分析地铁限界中抗侧滚扭杆对车辆动态包络线的影响及车辆与站台间隙问题，并提出在标准中增加相关内容的建议。
Bearings are located between the first end of the torsion bar and the center bore of the balance shaft, to center the torsion bar within the balance shaft.
多个轴承位于该扭力杆第一端与该平衡轴中心孔之间，将该扭力杆置于该平衡轴的中心。
It USES the patented AMI Torsion Bar squeegee head with a reciprocating substrate carriage and features front-panel programmable print stroke and process delays.
它使用专利ami的扭杆刮刀以及往复基板，具有前面板可编程印刷冲程和过程拖延。
Clutch spring, valve spring, spring for shock absorber, torsion bar for automotive seat, other kinds of high quality spring and key parts for automotive industry.
离合器弹簧、气门弹簧、减震器弹簧、汽车座椅扭力杆、其他各类汽车行业用高品质弹簧及关键部件。
Based on plastic intensifying theory, dual-linearity material model is used to calculate stress and strain on the cross section of a torsion bar spring by FE method.
在塑性硬化强扭理论的基础上，利用双线性材料模型计算了扭杆弹簧第一次强扭过程横截面的应力和应变。
Analytical results indicate that the optimized structure is superior to the original form and this method provides the guidance to the optimum design of torsion bar spring.
分析结果表明，所提出的改进结构优于原结构，其研究结果对扭杆弹簧的优化设计具有指导意义。
The most important issue for the problem of uniform cross-section bar torsion is the calculation of shear stress on the boundary of cross-section, which is very difficult.
对等截面直杆扭转问题，横截面边界上的剪应力计算是件困难的事，也是很重要的研究课题。
The Green's function of the torsion problem of isotropic bar is utilized for the outsidesingular point method.
先引入坐标变换，将该问题转化成相应的各向同性杆的扭转问题。
Another example on the torsion of a prismatic bar with elliptic section is presented here and its asymptotic analytical solution is also obtained.
还举了一个椭圆形截面杆强化弹塑性扭转问题，获得了它的渐近解。
In this paper, the torsion crack problem for a bar with cross section containing cusp points is discussed.
在本文中讨论了带裂纹杆的扭转问题，并设扦的截面周边具有回归点。
The method of pre-embedded steel bar is used in the supporting of hydraulic channel inverted siphon torsion slope formwork, which solved the problem of torsion slope support.
水工渠道倒虹吸扭坡模板的支撑采用预埋筋支撑方法，很好地解决了扭坡模板支护问题。
A torsion difference scheme of the bar with sectorial cross-section is developed in polar coordinate system.
导出了极坐标系下扇形截面杆件扭转问题的差分格式；用逐次超松驰迭代法求出了扭转应力函数差分值。
A spring compressor is used for covering part of the guide bar containing the torsion spring, and the door basket of the invention can put and fetch the food conveniently while sharing the components.
弹簧帽遮盖包含着扭力弹簧的导向杆的一部分。本发明冰箱的门篮筐，可以共用部件的同时能够简便地放取食物。
There have been many studies about the torsion problem of an isotropic bar with cracks, but most of them are available only to the special section geometry with special curvilinear cracks.
国内外已有不少对于各向同性材料带裂纹柱体扭转的研究，但是仅限于特定截面几何形状和特殊曲线裂纹的问题。
The rear suspension , derived from the hatchback, consists of a torsion-beam, two rear suspension arms and an integral anti-roll bar.
该悬架，从掀背式，共分一个扭束，两个悬架武器和不可分割的防滚棒。
The torsion resistance of the tension bar and the calculatiolls of bending shear stress, free torsional shearstress and bending torsional shear stress on the section are also discussed.
性质：用圆柱形材料试件作抗扭实验可求得扭矩和扭角的关系，相应最大扭矩的最大剪断应力叫抗扭强度。
Taking the effects of geometrical nonlinearity into account, a general theory of composite thin walled bar is established under the combinational deformation of tension, compression and torsion.
基于乌曼斯基薄壁杆件约束扭转理论，利用刚性周边假定建立了闭口薄壁杆件约束扭转分析的一维离散有限元方法。
Taking the effects of geometrical nonlinearity into account, a general theory of composite thin walled bar is established under the combinational deformation of tension, compression and torsion.
基于乌曼斯基薄壁杆件约束扭转理论，利用刚性周边假定建立了闭口薄壁杆件约束扭转分析的一维离散有限元方法。
应用推荐