Injection-molded tuned TPU shank.
注射成型调整的TPU柄。
Internal TPU shank promotes enhanced stability.
内部TPU柄促进更加稳定。
VVhat stays hot even if you tpu t it in a fridge?
什么东西即使放在冰箱里也热？
TPU protects toes, foot, ankle and lower legs from dangerous impact.
TPU的保护脚趾，脚，脚踝和小腿从危险的影响。
Flip-flop silhouette with an upper of transparent TPU for unique appeal.
触发器的剪影与上层的透明tpu独特的吸引力。
Injected TPU bands increase midfoot stability and create a lockdown fit.
注入TPU的频段增加足弓的稳定，并创建一个锁定适合。
Best result are obtained by shutting down on a non-TPU resin like polyethylene.
最好的结果是停止使用非聚氨酯树脂，如聚乙烯。
Lightweight polyurethane midsole and TPU outsole help absorb step shock and reduce fatigue.
轻量级聚氨酯中底和TPU外底帮助吸收步骤的冲击，减少疲劳。
Finally the various applications of TPU coated fabric in inflatable materials were concluded.
总结了TPU胶布在各种充气囊体材料中的应用。
In recent years, to improve the process performance, TPU appeared in many new easy process varieties.
近年来，为改善TPU的工艺加工性能，还出现了许多新的易加工品种。
Used in the manufacture of plastic, rubber hose transparent is of low hardness easy processing type TPU.
用于制造透明胶管的无可塑、低硬度的易加工型TPU。
The effect of molecular weight and content of PEG in soft segment on morphology and properties of TPU was studied.
研究了聚乙二醇分子量和含量对TPU的结构和性能的影响，提出了在TPU软段中引入PEG可以改善其与硝酸酯的混溶能力。
This belt type has an excellent TPU cover material that is abrasion resistant and also resistant to premature wear.
此带式，具有优良的TPU覆盖材料，耐磨损和过早磨损也耐。
POM suggested that EPP made TPU dispersed into PP matrix uniformly and PP crystallized on the TPU surface preferably.
POM说明EPP的加入，激活了TPU表面的异核结晶作用，使PP在TPU表面的结晶变得小而均匀。
The thermoplastic polyurethane (TPU) is prepared with mixer by one step, and it's properties is compared after heating.
用一步法在密炼机中合成了热塑性聚氨酯(TPU)，并对其热处理前后的性能作了比较。
The difference between TPU twin screw continuous reactor and conveyer belt production method was indicated and analysized.
比较并分析了热塑性聚氨酯弹性体(TPU)双螺杆法与传送带法生产工艺之间的差别。
The forming process of TPU was discussed and both the mould design and manufacturing method were introduced in this article.
分析了TPU(热塑性聚氨脂材料)的成型工艺，并详细介绍了TPU注射模的设计和制造方法。
It's caused by the micro phase separation degree of TPU is increased as well as the soft hard segment structure is perfected.
研究认为热处理提高了TPU的微相分离程度，完善了TPU中的软硬段结构。
By physical blending, the blends of cheap cis polybutadiene rubber and expensive thermoplastic polyurethane (TPU) are prepared.
采用物理共混的方法，制备了廉价的BR和贵的热塑性聚氨酯(TPU)共混物。
The results showed that with increasing content of TPU, elongation at break and notched impact strength of the blends increased.
拉伸强度和断裂伸长率均随辛醛含量的增加而降低。
This paper studied the influence of blending ABS with thermoplastic polyurethane (TPU) on the structure and properties of ABS resins.
研究了热塑性聚氨酯(TPU)与丙烯腈-丁二烯-苯乙烯共聚物(abs)共混对ABS结构和性能的影响。
The effect of TPU contents and blending technology on the mechanical properties and morphology of the alloy were studied in this paper.
讨论了TPU含量，共混工艺等因素对合金力学性能和形态结构的影响。
Through the central TPU window, can see the blue impression insoles, which is representative of Michael Jordan in north Carolina origin.
经中央TPU扇窗，能看到蓝色的印象鞋垫，代表的是迈克尔·乔丹在北卡罗莱纳的起源。
Our company business scope covers Lady Shoes, Handbags, Ceramic Tiles, Furnitures, Shoes Materials and Accessories, TPU Injection products.
产品经营范围包括：女装鞋，手袋，陶瓷，家具，鞋材配件，TPU注塑产品。
Medial Post: Denser CM-EVA foam, polyurethane foam, TPU device, or some combination of these, used on the inside edge of the shoe to curb pronation.
中间岗位：更加密集的CM - EVA泡沫、聚氨酯泡沫、TPU设备，或某一这些的组合，使用在鞋子的里面边缘遏制内旋。
The thermoplastic polyurethane (TPU) is prepared with mixer by one-step, and it's micro-phase separation is studied by atomic force microscope (AFM).
用一步法在密炼机中合成了热塑性聚氨酯（TPU）。在原子力显微镜（ AFM）下观察其微相分离情况。
Various characterization methods were adopted to investigate rheological property and cryogenic property and microstructure of the blends of SEBS/TPU.
论文中采用了多种测试表征方法对SEBS／TPU共混材料的流变性能、低温性能、微观结构等进行了研究。
The principles and calibration method by using this sensor to measure "engine outlet A3 temperature" and "TPU exhaust temperature" are also presented.
并说明了用此传感器来测量“发动机A 3引气口温度”和“TPU排气温度”的原理及校准方法。
The principles and calibration method by using this sensor to measure "engine outlet A3 temperature" and "TPU exhaust temperature" are also presented.
并说明了用此传感器来测量“发动机A 3引气口温度”和“TPU排气温度”的原理及校准方法。
应用推荐