Therefore, the influence of centrifugal buoyancy on the heat transfer performance of tube-shell heat exchanger with swirling flow was not negligible.
故在有旋流存在的管壳式换热器中，离心浮力对换热器传热性能的影响不可忽视。
All measures to improve the complex heat transfer coefficient are discussed in detail together with the improvement of the existing heat exchanger and development of new types.
文中较详细地讨论了提高换热器综合传热系数的各种措施，还讨论了完善现有换热器和开发新型换热器等问题。
The fin pitch and fin thickness of the exchanger are the key parameters for heat transfer and pressure drop.
换热器的翅片间距和翅片厚度是影响换热器换热和压降特性的重要因素。
Complex heat transfer coefficient and resistance loss of the moving gas inside system are important parameters to evaluate the characteristics of heat exchanger.
综合传热系数和系统内气体流动阻力损失是评价换热器性能的重要指标。
Heat-transfer coefficient, heat resistivity, heat conductivity, heat exchanger, heating convection, heat conduction, heat radiation, heat convection exchange.
传热系数，热阻率，导热系数，换热器，热对流，热传导，热辐射，对流传热。
Spiral-plate heat exchanger is a kind of high efficient heat exchanger device which is applicable to vapor-vapor, vapor - liquid, liquid – liquid heat transfer to liquid.
螺旋板式换热器是一种高效换热器设备，适用汽—汽、汽—液、液—液，对液传热。
The irreversibility of heat transfer and fluid flow in regenerative he at exchanger was analyzed, and the number of entropy generation units was introduced.
分析了蓄热式热交换器传热和流动过程的不可逆性，提出了熵产数的概念。
The results showed that the total heat transfer coefficient of heat exchanger with hot water arranged in shell-side was relatively higher by 33% than that with hot water arranged in tube-side.
结果表明：在相同的管、壳程流速下热流体在壳程时换热器总传热系数比热流体在管程时相对高出约33%。
Contrastive simulation research on heat - transfer factor, friction factor and fin structure of offset strip fin heat exchanger affect heat - transfer property by compiling computer programs.
采用计算机编程对错位翅片型板翅换热器的传热固子、摩擦因子及翅片结构对传热性能影响进行了数值模拟对比研究。
A mathematical model was developed to investigate mass flow rates in the heat transfer pipes of the air side heat exchanger with and without distribution pipes for an air source heat pump.
建立分液管和换热器的数学模型，对空气源热泵风侧换热器在有、无分液管的情况下的各盘管中质量流量分配问题分别进行研究。
The results showed that compared to conventional smooth segment baffle heat exchanger, the plate heat exchanger(PHE) can effectively strengthen the film heat transfer coefficient of the shell side.
研究结果表明，与传统的光滑管弓形隔板换热器相比，板式换热器能非常有效地强化空气侧的膜传热系数。
The results obtained provide a theoretical basis for the development and application of strengthening the heat transfer of granular media flowing in the corrugated plate heat exchanger.
这些研究结果为粉粒体波面板换热器强化传热的研究与开发提供了理论基础。
Compared with traditional heat exchanger the new heat exchanger provides superior heat transfer and pressure drop performance.
新型换热器与传统换热器相比较传热效率高、压降低、材料及能耗小。
The experimental correlations for the forced convection-condensation heat transfer of flue gas in the heat exchanger are obtained by the experimental study result.
根据实验研究结果拟合出了肋片管式冷凝换热器烟气强迫对流凝结换热的实验关联式。
To find the basic heat transfer performance of fin-tube heat exchanger, the numerical analysis is carried for heat transfer element with single round and related fin area.
用数值方法分析了涡产生器式圆管管片式换热板芯单个圆管翅片区域内的传热与阻力性能。
Some experimental investigations were made of the heat transfer performance and resistant drop characteristics of the temp plate heat exchanger.
研究一种新型高效型板换热器，对型板换热器的传热特性及阻力降性能等进行了实验研究。
It is very important to determine the heat transfer between ground heat exchanger and surrounding soil for a closed ground source heat pump.
闭环埋地换热器与周围土壤和岩石层的热量交换速率是闭环地源热泵系统设计和成功运行的关键。
The heat transfer and flow resistance performance of corrugated tube heat exchanger were examined by oil, water, and steam.
采用油、水、水蒸气对波纹管换热器的传热和流动阻力性能进行了试验研究。
An unsteady heat transfer model was sot up and solved by numerical solution for the heat transfer characteristic of U-pipe heat exchanger and the interaction of the two pipe legs of the GSHPs.
针对U型管埋地换热器的传热特点，考虑了两管脚之间的相互影响，建立起非稳态传热模型。
The difference of heat transfer calculation between spiral plate heat exchanger and single shell and tube heat exchange is discussed in the article.
本文讨论了在传热计算中螺旋板换热器与单壳程、单管程列管式换热器的差异。
The heat transfer characteristics of flowing granular waved plate heat exchanger under vibration condition are investigated.
研究了波面板换热器在振动情况下的传热特性。
Base on several common U-tube heat transfer models of ground source heat pump, this paper proposes a transient heat transfer model for single U-tube vertical heat exchanger.
介绍了几种常见土壤源热泵u型埋管换热器传热模型，建立了单u型垂直埋管换热器的非稳态传热模型。
Heat transfer mechanism, structure and its fabrication of spiral plate heat exchanger are introduced. Its application in converter is described.
介绍螺旋板式换热器的传热机理、结构和制造工艺，列举了该换热器在合成塔中的应用。
The heat transfer performance test of ground heat exchanger was presented and compared with thermal response test.
阐述了地源热泵地埋管传热性能的测试原理，并与热响应测试原理相对比。
A calculation method is presented for heat transfer and flow resistance of a spiral plate heat exchanger for the gas-liquid.
提出了螺旋板式换热器用于气-液热交换时的流动阻力以及传热设计的计算方法。
In thermoacoustic system, the oscillating heat transfer in regenerator is along the axis direction of the stack and in heat exchanger it is along the radial direction of the tube.
在热声发动机系统中，回热器的振荡换热是沿流体通道的轴向，而加热器振荡换热主要是沿流体通道径向。
This kind of fin is applicable to the fin-tube cooling heat exchanger and the effect of heat transfer is perfect.
证明该圆孔翅片是一种适用于翅片管式制冷换热器且传热效果优越的片型。
Through reinforcing heat transfer by changing monitor and shell, research and development of new high-activity heat exchanger were made.
本文通过壳程和管程两方面进行强化传热，来研究与开发新型高效换热器。
Furthermore, the model can also be used to solve heat exchanger network problems with unequal heat transfer film coefficients and different construction materials.
而且此模型也可以用于求解具有不同传热膜系数和不同换热器材质的网络。
Furthermore, the model can also be used to solve heat exchanger network problems with unequal heat transfer film coefficients and different construction materials.
而且此模型也可以用于求解具有不同传热膜系数和不同换热器材质的网络。
应用推荐