Starter Drive, Transmission Shaft, Cold Forging Parts, Lift Motor.
单向器，传动轴，冷挤压件，摇窗电机。
Place Taper-lock Bushing and Timing Belt Pulley on the transmission shaft.
将锥面紧固套与同步带轮装在传动轮上。
Place Taper - lock Bushing and Timing Belt Pulley on the transmission shaft.
将锥面紧固套与同步带轮装在传动轮上。
The design of the main drive system mainly bases on the torque moment of transmission shaft.
传动扭矩是矫直机主传动系统设计的主要依据。
The torsional moment of transmission shaft and power of electric motor are reduced by the method.
此方法可降低传动轴上所受的扭矩，减少了电动机的功率。
C. shaft coupling on the transmission shaft should be connected with rubber shaft coupling on gear reducer.
传动轴上的联轴器必须与齿轮减速箱上的橡胶联轴器相联接。
The embodiment of the invention also discloses a double shunting reducer with the above transmission shaft.
本发明实施例还公开了一种具有上述传动轴的双分流减速机。
Bodywork is jointed by armor plate, and transmission shaft is adopted common mechanical cutting to process.
车体主要使用钢板焊接，浮动轴采用普通机械切削方法加工。
The transmission shaft gear is directly meshed with the tension roll synchronizing gear to reduce measuring errors;
本发明传动轴齿轮与张力辊同步齿轮直接啮合，减少了测量误 差；
A lubricating oil pump shaft and a CAM transmission shaft are respectively sheathed in series in two inner cavities.
两内腔内分别串套机油泵轴和凸轮传动轴。
Clutch is fixed between engine and transmission shaft, which ACTS as the role of combining or cutting the transfer of motivity.
离合器装在汽车发动机与变速器之间，起接合或切断动力传递的作用。
The calculation results show that in position control mode the effect of transmission shaft weight on strip shape can be ignored;
计算结果表明位置控制模式下主传动轴重量对带钢板形的影响可以忽略；
Agricultural universal joint transmission shaft is a common part for connecting P. T. o of the tractor with power-driven implements.
农用万向节传动轴是联结拖拉机动力输出轴与驱动型农机具重要的通用性部件。
Now she has an annual output of 150 thousands transmission shaft assemblies, 20 thousands large and medium-sized tractor drive shafts.
现己形成年产传动轴总成150000根，大中型拖拉机驱动轴20000根。
The result indicates that fuzzy optimum design method based on fuzzy synthetic judge of automobil transmission shaft is more practical value.
结果表明，基于模糊综合评判的汽车传动轴模糊优化设计，是一种更具有工程实用价值的综合设计方法。
The transmission shaft drives the fertilizer shifting tray in a hopper to shift the fertilizer into a conveying pipe to fallen into a furrow.
传动轴带动料斗内播肥盘将肥料拨入输料管而落入犁沟。
The testing method using fall size substance specimens is introduced for transmission shaft, oil well pipe, train pothook, cover of sewer well.
介绍了传动轴、油井管、火车挂钩、窨井盖等全尺寸实体试件试验方法与工程实际应用情况。
Ltd. also designs and manufactures various kinds of transmission shaft assembly, shaft coupling assembly as well as hydraulic pump assembly etc.
本公司还竭诚为客户设计，制造各类传动轴总成，联轴器总成，液压泵总成等以满足各界客户的需求。
The third case is due to the deformation of the transmission shaft caused by the imbalance, the general situation in the chassis collision over the car.
第三种情况是因为传动轴变形不平衡引起，一般这种情况出现在底盘碰撞过的车比较多。
For many of the mechanical system of linear reciprocating motion of the supporting role, or transmission shaft support and cooperation, and linear bearing.
用于各种有直线往复运动的机械系统中，起支撑或传动的作用，常与轴支撑、直线轴承配合使用。
Shows high magnetization effect of magnetic iron when magnetic particle coil not conductive, torque transmission shaft transmission from not in driven shaft.
显示高磁化效应的磁性铁粒子当磁性线圈不导电时，转矩不会从传动轴传导于从动轴。
And the main influencing factors are two, 1, the transmission shaft and the balance machine connection way. 2, balancing machine spindle processing accuracy.
而主要影响因素有两项，1、传动轴与平衡机的联接方式。2、平衡机主轴加工精度。
The utility model relates to a transmission shaft and small exhaust amount positive motor tricycle, belonging to an automobile mainly for carrying passengers.
一种传动轴式小排量正三轮摩托车，属以载客为主的机动车。
The metallurgical structure and fracture morphology on gear transmission shaft of 45 steel were analyzed by means of optical microscope and scanning electron microscope.
采用光学显微镜、扫描电镜等分析手段，对45钢大齿轮传动轴断裂表面的金相组织、断口形貌进行了分析和检测。
In this paper, the transmission shaft of the all-moving horizontal tail for a fighter plane is considered as a structural system, and its failure probability is analysed.
本文从整个构件系统着眼，研究某型歼击机全动平尾转轴梁静强度的可靠性。
To improve the dynamic characteristics of a helicopter transmission shaft, bending vibration of a composite transmission shaft was investigated under a non-inertial system.
为改善直升机传动轴的动力学特性，研究了非惯性系下复合材料传动轴的弯曲振动问题。
The results indicate that the mistake choice of material, unreasonable quench temperature and too small region of MF quenching are the cause of transmission shaft fracture.
结果表明材料选择错误、淬火温度不当，以及中频淬火区域过小是导致传动轴断裂的原因。
Power is delivered to a spline shaft by a power output shaft of a tractor via a universal transmission shaft, an input shaft of a gear box, and a conical gear pair in mesh;
动力由拖拉机的动力输出轴，通过万向传动轴、传动箱的输入轴、经互相啮合的圆锥齿轮付传递至花键轴；
A motor shaft is a hollow shaft, so that the hub motor is utilized for installing a transmission shaft while being utilized as an auxiliary power of a hybrid electric vehicle.
电机轴采用空心轴，以便轮毂电机作为混合动力汽车的辅动力时用以安装传动轴。
A motor shaft is a hollow shaft, so that the hub motor is utilized for installing a transmission shaft while being utilized as an auxiliary power of a hybrid electric vehicle.
电机轴采用空心轴，以便轮毂电机作为混合动力汽车的辅动力时用以安装传动轴。
应用推荐