Picture shows how the glove with an ultrasonic sensor works according to the passage.
根据文章所说，图片显示了带超声波传感器的手套是如何工作的。
An design plan of ultrasonic sensor is presented.
介绍了一种超声波接近开关的设计方案。
The digital filter was done to the output signal of the analog ultrasonic sensor.
对模拟量超声波传感器的输出信号进行了数字滤波。
By the driving of the step motor, the ultrasonic sensor turns in immovable Angle.
超声传感器在步进电机的驱动下，以固定的角度步进转动。
The ultrasonic sensor and the working principle in the seam tracking are explained.
介绍了超声波传感器及其焊缝跟踪工作原理。
This paper introduces a automatic measurement installation using ultrasonic sensor.
介绍一种利用超声波作为传感器的检测仪器。
Rational distribution of the ultrasonic sensor net is very important to make it work well.
合理的超声波传感器网络分布是实现超声波网络导航的重要条件。
The control of driving motor module and ultrasonic sensor module are realized in the system.
实现了对机器人驱动电机、超声传感等任务模块的系统控制。
For hazardous locations, the ultrasonic sensor is rated Intrinsically safe with an optional safety barrier.
对于危险地点，超声波传感器的额定本质安全的一个可选的安全屏障。
A new kind of the seam tracking system with non-contact ultrasonic sensor in SAW is presented in this paper.
本文提出了一种非接触超声传感埋弧焊焊缝跟踪系统。
In this paper, ultrasonic cross correlation technology was presented, ultrasonic sensor and circuit were designed.
针对油井流量的实际情况提出了超声互相关方法，设计了超声传感器和互相关器。
The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human's audible range.
超声波传感器的数据载体产生的可听范围内使用非常高的频率，不属于人类。
World coordinates of geometric center line of pruned plane was acquired by combination of Ultrasonic sensor and CCD camera.
超声波传感器和摄像机组合可获得修剪平面几何中心线的绝对坐标。
The physical foundation of the ultrasonic waves is presented. A contactless ultrasonic sensor in seam tracing is developed.
介绍了超声波的物理基础，研制了焊缝跟踪中的非接触超声波传感器。
Analyzed the limitation of the ultrasonic sensor in the underground drilling robot avoids obstacle, put forward the scheme solved.
分析了井下钻孔机器人避障中超声波传感器的局限性，并提出解决方案。
Ultrasonic sensor is an instrument which transform sound into electricity, therefore, it is also called ultrasonic wave transducer.
超声波传感器是实现声电转换的装置，所以，又称为超声波换能器。
Mount the non-contacting ultrasonic sensor above the liquid being measured and install the watertight Electronics enclosure nearby.
安装非接触式以上的液体被测量超声波传感器和安装水密电子外壳附近。
The result showed that it was feasible to describe the fruiter shape by using the level distance data measured by ultrasonic sensor.
试验结果表明，以超声波传感器测得的水平距离数据作为描述果树外形的依据基本可行。
The concept of the system hardware is discussed. This paper presents also the interfaces of LCD, ultrasonic sensor, motor drive and wireless communication.
给出了控制系统硬件设计方案，并对系统的显示电路、超声波测距电路、电机驱动电路、无线通信电路等硬件模块接口电路作出了简要描述。
The chip comprises ultrasonic sensor driver circuit, time measurement control, temperature measurement control, STOP signal conversion such as modules design.
该芯片包括超声波探头驱动电路、测时控制电路、测温控制电路、STOP信号转换电路等模块。
By programming the FPGA, we finished the hardware control cooperating with the DSP, the OSD function, the collection and dealing with the ultrasonic sensor signal.
主要对FPGA进行编程设计，配合DSP完成了系统硬件控制、OSD以及超声波雷达信号的采集、处理等功能。
One end of a probe telescopic rod is provided with an ultrasonic sensor, a flow velocity determinator, a pressure sensor and a vacuum piston water sample collector.
探头伸缩杆一端安有超声波传感器、流速测定仪、压力传感器和真空活塞水样采集器。
It can be moved to the room, because there is an ultrasonic sensor, the robot will encounter obstacles, it can according to the microprocessor command around obstacles.
它可以在房间里自行移动，由于有一个超声波传感器，机器人不会碰到障碍物，它能按微处理器的命令绕过障碍物。
This paper analyzes the influence of incidence and oscillation frequency of ultrasonic sensor on measuring accuracy. The option principle of ultrasonic sensor is presented.
以时差法为例，分析了超声波探头中超声射线入射角及振荡频率对测量精度的影响，给出了探头的选择原则。
The conflict factor of D-S evidence theory is applied to constructing an adaptive ultrasonic sensor model for the navigation of mobile robots in narrow unknown environments.
针对移动机器人在未知狭窄环境中的导航问题，利用证据理论中的矛盾因子，给出了一个自适应超声波传感器模型。
The paper analyzes the influence of incidence and oscillation frequency of ultrasonic sensor on measuring accuracy and the choose principle of ultrasonic sensor is presented.
文中以时差法为例，分析了超声波换能器中超声射线入射角及振荡频率对测量精度的影响，给出了换能器的选择原则。
The system introduced ultrasonic sensor array, eddy sensor array and multi-channel magnetic sensor, and in addition to sensor, All hardwares are packed in a portable computer.
除传感器外，所有硬件都装在一部便携式计算机内。具有功能强大、技术超前、扩展性好、携带方便等特点。
A fiber optic ultrasonic sensor based on Fizeau interferometer for the measurement of ultrasonic wave propagated on the surface of a solid plate has been proposed and demonstrated.
验证了一种基于光纤Fizeau干涉仪的声发射传感器，可用于固体表面传播的超声波的检测。
Original entry ultrasonic sensor in measuring devices and meet in high mechanical electronic scales match, a clear upper hand is no mechanical transmission of ultrasonic measuring technology sector.
原装入口超声波传感器测高装置与碰头机械电子秤比拟，一个明显上风是超声波丈量技术没有机械传动部门。
Original entry ultrasonic sensor in measuring devices and meet in high mechanical electronic scales match, a clear upper hand is no mechanical transmission of ultrasonic measuring technology sector.
原装入口超声波传感器测高装置与碰头机械电子秤比拟，一个明显上风是超声波丈量技术没有机械传动部门。
应用推荐